Chopper Pumps Equipment For Water Pumping Available In Costa Rica
-
PremiumManufactured by Cornell Pump LLCbased in USA
Cornell's Chopper Pump is designed to handle severe plugging. The standard casing, made of ASTM A536 grade 65-45-12 ductile iron, stands up to robust applications. Everything about the pump is built to tackle complex jobs, from the replaceable cutter bar made of T1 tool steel heat treated to a minimum of 60 Rockwell C hardness to the heat-treated cast steel impeller. The Cornell Chopper pump ...
-
PremiumManufactured by Cornell Pump LLCbased in USA
Cornell's Chopper Pump is designed to handle severe plugging. The standard casing, made of ASTM A536 grade 65-45-12 ductile iron, stands up to robust applications. Everything about the pump is built to tackle complex jobs, from the replaceable cutter bar made of T1 tool steel heat treated to a minimum of 60 Rockwell C hardness to the heat-treated cast steel impeller. The Cornell Chopper pump ...
-
Manufactured by MXQ, LLCbased in USA
Disk pumps are a crucial part of various industries including oil & gas, pulp & paper, chemical, food & beverages, and wastewater treatment. They vary in type and designs depending on the application. MXQ’s industrial disk pumps are manufactured using the latest technology that helps eliminate the issue of clogging. These pumps can be customized to function as impellers. Our ...
-
Manufactured by Vaughan Company., Inc.based in USA
The patent pending Floor Washer System is the Foambuster nozzle/deflector as described above, but with the deflector rotated from below the nozzle to above the nozzle. The inverted splashplate spreads nozzle flow out across a floor in a fairly wide path to wash settled grit, sand or debris into a sump where it can be pumped out by a dewatering chopper pump. The Floor Washer System is particularly ...
-
Manufactured by DeTech Pumps Co. Ltd.based in CHINA
As the increase of population worldwide, and large capacity of waste water effluent. to protect the environment from pollution and to improve the mankind circumstance, and be harmonious with nature. People have to treat all the wastes mankind made. Like water, air, etc. For the water treatment, we have to collect waste water first, then to clean it. It is not easy for some tough water collected. ...
-
Manufactured by CRI-MAN S.p.A.based in ITALY
Multi-channel impeller and double chopping system. Chopping system and anti-clogging screw; Max capacity: 160 m³/h (705 US gpm); Head: 46 m (151 ft); Motor power: 2,2 - 18,5 kW (3 - 26 HP); Suction: 100 mm (4 inches); Discharge: 80 mm (3 1/ 8 ...
-
Manufactured by Vaughan Company., Inc.based in USA
Small tank mixing is a lower cost, simplified Rotamix system, using a Chopper Pump and external-mount nozzle assemblies. The external-mount nozzles are sandwiched between 6' ANSI flanges and provide fixed discharge angles off the tank wall. The nozzles can be made of light-weight 316SS or SCH40 steel with glass lining. These systems are ideal for FOG mixing (fats, oils, & grease) or for small ...
-
Manufactured by Vaughan Company., Inc.based in USA
Vaughan's Rotamix system is the world's most reliable cost effective means of mechanical hydraulic mixing for sludge tanks, digesters and other high-volume ...
-
Manufactured by Vaughan Company., Inc.based in USA
EXPLOSION PROOF MOTOR UL Listed Explosion Proof or non-Explosion Proof, with moisture sensor and tandem mechanical seals. Also available in Continuous In-Air or Close-Loop Cooled. CARTRIDGE SEALS Vaughan cartridge seal in lower housing. PUMP OUT VANES AND UPPER CUTTER Keeps pumpage away from the seal. OIL LEVEL MONITOR System constantly monitors oil level in the bearing housing. CAST ALLOY STEEL ...
-
Manufactured by Doda USAbased in USA
Super / PTO chopper pumps with dual chopping feature assure the waste will be properly chopped leading to fewer plug-ups in the field. Available in standard lengths of 6’, 8’, 10’, 12’ with additional lengths upon request. Can fit 540 or 100 RPM. Pump housing with nodular cast iron impeller & venture design accelerate slurry movement, the patented chopping system ...
-
Manufactured by Vaughan Company., Inc.based in USA
The Vortex Chopper is a combination of a cylindrical receiving vessel with a conical bottom connected through a large, 12” elbow to the suction of a Vaughan Chopper Pump. The pump discharges through Vaughan’s 3-way valve back to the receiving vessel for mixing and particle size reduction. Once the material in the receiving vessel has been thoroughly mixed, an operator can change the ...
-
Manufactured by Vaughan Company., Inc.based in USA
The patented Foambuster uses the same glass-lined ductile iron nozzles as Rotamix but also uses a stainless steel splashplate located below the nozzle to deflect the nozzle discharge and create a broad spray of sludge, which wets and breaks up foam forming on the surface of the digester. Digester sludge is pumped through the Foambuster either by the Rotamix Chopper Pump or by a separate Chopper ...
-
Manufactured by Mixing Systems, Inc.based in USA
Our Hydraulic Sludge Mixer consists of a series of jet nozzles that are strategically placed throughout a tank to keep solids in suspension. These nozzles are designed such that they provide multi-zone mixing and steady velocity flow which will prevent solids from settling on the tank floor. A key advantage of the system is that there are no in-basin moving parts. There are different design ...
-
Manufactured by Discflo Corporation Inc.based in USA
Discflo’s submersible pumps are the perfect solution for viscous, abrasive and/or high-solids applications. They have been employed successfully in some of the toughest installations, including digester sludge, toxic slurries, nuclear waste, dewatering tank transfer, drilling, dredging, and environmental clean-up. In many cases, they are retrofitted to replace failed centrifugal, ...
-
Manufactured by Depump Technology Sjz.Co.,Ltd.based in CHINA
High quality Submersible sewage pumps come in different types, including vortex, grinder, and chopper pumps. The vortex pump is ideal for handling fluids with large solids content, while the grinder and chopper pumps are useful where solids are unlikely to clog the pump, such as in residential buildings. ...
-
Manufactured by DODA Costruzione Macchine Agricolebased in ITALY
This pump is operated by a hydraulic motor and is particularly suitable for emptying canals, tanks, sedimentation pools, etc.; drawing from great depths at variable ...
-
Manufactured by Vaughan Company., Inc.based in USA
Easy above-deck access to valve and nozzle operators. Manual or fully automated operation available. Recirculation feat ure also mailable with Horizontal and Self-priming ...
-
Manufactured by Landia a/sbased in DENMARK
Landia’s MPG-I long shaft pumps are a range of vertical chopper pumps. The fan-cooled motor is located well above the liquid surface and is therefore well protected. There pump contains no seals, which makes it extremely robust and tough. ...
-
Manufactured by Landia a/sbased in DENMARK
The MPTK-I pump is a series of pumps designed to pump heavily contaminated liquids, as well as liquids with a high dry matter content. MPTK-I can be fitted with a knife system at the pump inlet. This helps to ensure smooth operation in conditions where many other pumps have problems with ...
-
Manufactured by Heger Pumps Inc - Dragflowbased in USA
A chopper pump is a centrifugal pump which is equipped with a cutting system to facilitate chopping or maceration of solids that are present in the pumped liquid. The main advantage of this type of pump is that it prevents clogging of the pump itself and of the adjacent piping, as all the solids and stringy materials are macerated by the chopping system. Chopper pumps exist in various ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you