Fire Water Pumping Equipment For Water Pumping Available In Lithuania
-
Manufactured by ULUSOY SU POMPALARI SANAYI ve TICARET LTD. STI.based in TURKEY
Booster pump is running for the first time, ond collector bleeding stops should be provided ond necessory meosuresshould be token to ovoid air again. Water absorption of the shortest path to reach out to the flat collector, storage from the pipe diameter must not be smaller than the diameter of the intake manifold.The pump's direction of rotation of the motor clockwise looking from the ...
-
Manufactured by Raywin Powertrain Technology Co.,Ltdbased in CHINA
1. This engine is small in size and light in weight, so that it can be installed and used in a small space; 2. The tunnel structure is adopted, so that the reliability of the engine is guaranteed, and the noise is effectively controlled; 3. This engine has the characteristics of high torque and high torque reserve; 4. The PTO output torque is large, and the hydraulic pump works safely and ...
-
Manufactured by Framo ASbased in NORWAY
Framo hydraulic fire water pumping systems, with single-stage pumps that rotate slowly during standby, offer a minimal start load and the best possible ...
-
Manufactured by Carrozzeria Chinetti S.R.L.based in ITALY
Water pump: CHINETTI 2T 5012 - 6'000 lt/min @ 10 bar - Bronze. Basket monitor: AKRON Stream Master, 5700 l/min @ 5.5 bar. Side lockers: nos. 2 on each side. Note: Available also with water and foam tanks and different foam mixing systems, at Customer choice. ...
-
Manufactured by InnoVfoam B.V.based in NETHERLANDS
Various types of foam proportioners for precisely proportioning foam concentrate in the water-stream of an extinguishing system can be used. The choice of proportioner depends on a number of factors: the type of extinguishing system, the required capacity, and the available energy, space (inside/outside/size) and ...
-
Manufactured by Koseq BVbased in NETHERLANDS
The Vessel’s base is a stable Aluminium Catamaran type boat that has a large free deck area for safe operations, prepared for multi-functional operations. Despite its length of around 12 m it is still possible to transport the vessel over land by truck. The vessel has prepared connections and foundations for a powerful Hydraulic Knuckle boom-crane, Hydraulic operated boom-reel, cassette ...
-
Manufactured by GW Sprinkler A/Sbased in DENMARK
This valve is used where excessive uncontrolled pressure surges from the kick-in of fire pumps shall be avoided. The C-300 Pump Control valve is installed near the fire pump outlet, and is open in the stand-by position. When the fire pump starts, the full flow capacity of the C-300 Pump Control valve is discharged to drain. Immediately at pump start the C-300 valve pilot will monitor the pumped ...
-
Manufactured by GMP S.p.A.based in ITALY
Features; Max power:15 kW. Max head:62 m. Max flow:75 m³/h. Fields of application; Building, FireFIghting, ...
-
Manufactured by DESMI A/Sbased in DENMARK
The Modular S Centrifugal Pump represents one of the most distinctive products of self-priming pumps. On the basis of 50 years of experience in the production of self-priming pumps we produce a pump series that meets the future demands for economical and reliable pumps. The Modular S is widely used within different applications and markets. ...
-
Manufactured by Raywin Powertrain Technology Co.,Ltdbased in CHINA
1. This engine is small in size and light in weight, so that it can be installed and used in a small space; 2. The tunnel structure is adopted, so that the reliability of the engine is guaranteed, and the noise is effectively controlled; 3. This engine has the characteristics of high torque and high torque reserve; 4. The PTO output torque is large, and the hydraulic pump works safely and ...
-
Manufactured by ULUSOY SU POMPALARI SANAYI ve TICARET LTD. STI.based in TURKEY
Booster pump is running for the first time, and collector bleeding stops should be provided and necessary measuresshould be taken to avoid air again. Water absorption of the shortest path to reach out to the flat collector, storage from the pipe diameter must not be smaller than the diameter of the intake manifold. The pump's direction of rotation of the motor clockwise looking from the top. ...
-
Manufactured by Atilim Makinabased in TURKEY
Water Pumps Sizes are selected to suit the size of the lling building and the number of tanks and driven electric or diesel engine. All interior bolt and screw exposed to pumped liquid shall be made of rolled bronze or corrosion resistant material. The pump shall be provided with automatic air-release valve, circulation relief valve and pressure gauges. Bearings shall have an L-10 rating of not ...
-
Manufactured by Jiangsu Winsun Power Co.,Ltdbased in CHINA
Water pump inlet joint type joint caliber.screw type 80mm.Water pump outlet joint type joint caliber tooth type 65mm.Rated flow L/min ≥1000 .Max. flow L/min ...
-
Manufactured by ULUSOY SU POMPALARI SANAYI ve TICARET LTD. STI.based in TURKEY
Booster pump is running for the first time, and collector bleeding stops should be provided and necessary measuresshould be taken to avoid air again. Water absorption of the shortest path to reach out to the flat collector, storage from the pipe diameter must not be smaller than the diameter of the intake manifold. The pump's direction of rotation of the motor clockwise looking from the top. ...
-
Manufactured by Framo ASbased in NORWAY
Framo electric fire water pumping systems are the preferred solution when higher pumping capacities are needed, or when the generator package is located too far from the fire water ...
-
Manufactured by MAS DAF MAKINA SAN. A.S.based in TURKEY
MiniUKM Series self priming wastewater pumps come with a compact design Specially designed open impeller structure provides its self priming capacity without compromising its hydraulic performance. Maintenance and cleaning of the pump can easily be done thanks to its simple assembly and disassembly. Usage of mechanical seal in these pumps, assures perfect sealing and a clean environment. ...
-
Manufactured by Sinco Fire and Security Co., Limitedbased in CHINA
XBC series Diesel engine fire-fighting pump is a new style fire fighting equipment, which is developed upon the fitted fire fighting pumps (single stage single suction type, singlestage dualsuction type and sectional multistage type), can be divided into several series. The equipment has a wide range of pressure and temperature and can be used for almost every occasion necessary for fire fighting ...
-
Manufactured by DESMI A/Sbased in DENMARK
Close coupled self-priming centrifugal pump is a totally renewed design based on the original “K&R” models. However fully replaceable with former types, in dimensions as well as capacities. The compact pumps are simple in design, consist of few parts, and will thus reduce your costs. This of course also means easy maintenance. On basis of 50 years of experience in the production ...
-
Manufactured by MXQ, LLCbased in USA
Capacity: Up to 2,640 GPM. Head: Up to 330 Ft. Materials of Construction: Cast Iron, Cast Steel, SS-316, SS-304, etc. Applications: Cooling towers, Brine Applications, Hot Oil Applications, Water Pumping, Fire Fighting, Effluent Evaporation Plants, Paper & Pulp, ...
-
Manufactured by DP-Pumpsbased in NETHERLANDS
The pressure boosting systems from the Utility Line, with a maximum of 6 pumps and a capacity of up to 960 m3/h, are the biggest powerhouses in the pressure boosting systems range for drinking water and slightly aggressive liquids. They offer a solution for applications that require high capacity or head and advanced control options in the cabinet. All around the world, hospitals, luxury hotels, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you