Pump Control Valves Equipment For Water Pumping Available In Suriname
-
PremiumManufactured by Senix Corporationbased in USA
Used to control valves, pumps, an small motors by a ToughSonic sensor. Avoid the need for other logic devices. Consolidates all power and interface wiring. Color-coded sensor wire landings. RJ-11 jack for direct connection to all Senix serial data interfaces and setup kits. Two Form-C dry contact relays rated 5A@250 VAC or 5A@24VDC with LED status indicators. DC power input terminals plus jack ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Y-Strainers are devices for mechanically removing unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. They are used in pipelines to protect pumps, meters, control valves, steam traps, regulators and other process ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME Y type Strainer is the most cost effective, Y strainer uses perforated wire mesh or wedge wire to trap unwanted solids from a process stream. Y strainer can be mounted vertically or horizontally in a piping system Strainers are low-cost solutions to large nominal bore straining ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The MRB500H3E Tritium Bubbler is the state-of-the-art discriminating tritium collection instrument. Sample gas enters the instrument and flows through two (2) standard scintillation counter ready vials filled with ethylene glycol, which retain the HTO component. The sample gas, now less the tritiated water vapor, flows through a heated palladium sponge catalyst bed, which oxidizes the sample gas. ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
This Low Flow Sampling System has a flow range of 2-25 LPM. It consists of a 13 pound, 1/8 hp, Oilless Rocking Piston Pump, TMV needle control valve (for flow rate adjustment/measurement), brass interconnect piping, and 1/4” hose barb (Quick Disconnect ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Sample gas enters the instrument and flows through two (2) standard scintillation counter ready vials filled with ethylene glycol, which retain the HTO component. The sample gas, now less the tritiated water vapor, flows through a heated palladium sponge catalyst bed, which oxidizes the sample gas. The oxidized sample gas flows through two (2) more vials with ethylene glycol that retain the ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
This extremely popular, outdoor rated continuous duty air sampling system is intended for secure outdoor ambient particulate and/or gaseous air sampling. The pump, control valve, and control panel are all hard mounted in a heavy gauge TIG welded aluminum, fully lockable, fan cooled, weather proof enclosure. The control panel houses the power switch, fuse protection, resettable electronic timer ...
-
PremiumManufactured by Tecnidro Srlbased in ITALY
The valve isolates pumps from the system during pumps starting and stopping to protect pipe lines and pumps itself. The valve is equipped with a control solenoid valve that is switched on at pump starting and is able to fulfill pipe line gradually, reducing pressure rising peaks and allowing soft starting of the pump with closed outlet. The valve controls pump stopping as well, gradually closing ...
-
PremiumManufactured by Tecnidro Srlbased in ITALY
IM-CP Pump Control ...
-
PremiumManufactured by Infitek Co., Ltd.based in CHINA
It is mainly composed of shell, sterilization chamber, control system, power supply system, electric heater, safety valve, solenoid valve, pressure and temperature indicator, drying heater, vacuum pump, control valve, liquid crystal display and so on. It is suitable for sterilizing surgical instruments, dressings, utensils, culture media, etc. for medical, health, scientific research, and ...
-
PremiumManufactured by BioKube A/Sbased in DENMARK
Modular treatment units that fit into multi-ple wastewater solutions, e.g. sedimenta-tion -or mechanical pre-treatment and bio-sludge removal. The Saturn units are installed above ground to minimize civil work and are typical used for systems between ...
-
Manufactured by Mahesh Eng. Worksbased in INDIA
Inner Shell : 2 mm, bottom: 2.5 mm, gearbox plate: 4 mm. Inter shell and bottom : 2 mm, Outer shell and bottom: 1.5 mm Agitator blades and shaft, 50 mm LRB insulation Outlet Valve SMS union, 51 mm. ...
-
Manufactured by Chromatic Industries, Inc.based in USA
The HCV is Chromatic flagship valve and has been servicing applications across market sectors since it’s introduction into the North American energy industry. As the OEM designer and manufacturer of the HCV, Chromatic is committed to the design, manufacture and distribution of valves that simplify your operations and reduce ...
-
Manufactured by GA Industries, LLCbased in USA
The GA Altitude Valve is used on the inlet of water tanks, standpipes and reservoirs to prevent overflow when the supply head is greater than the maximum water level. This rugged and versatile piston control valve provides superior design, simple operation, and maximum performance in water ...
-
Manufactured by Hefei Taihe Optoelectronic Technology Co., Ltd.based in CHINA
Artistic appearance:Original piano frame and artistic design; Arc transition design - beautiful, simple and three-dimensional. ...
-
Manufactured by Lewa GmbHbased in GERMANY
As the inventor of the compressed air-operated double-diaphragm pump, Wilden Pump & Engineering Co. introduced the first pump of this design in 1955. No other manufacturer of compressed-air diaphragm pumps can draw from so many years of experience. Development of this technology has continued. Today, Wilden has a comprehensive product line. The right solution is always available for general ...
-
Manufactured by Delatite Valves Pty. Ltd.based in AUSTRALIA
The Delatite full prt ball valves have metal seats and the valves are zero leakage to the MSS SP.61 Standard for block valves. Delatite have a range of hard coatings which are applied using state of the art application techniques. With over 800 coating choices Delatite can match the best coating to suit the customers requirements 4. Delatite valves have been designed to provide zero leakage in a ...
-
Manufactured by Emile Egger & Cie SAbased in SWITZERLAND
Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain ...
-
Manufactured by Oil Pollution Environmental Control Ltdbased in UNITED KINGDOM
A self-sufficient oil recovery system using polypropylene mops for marine use: For use in docks, harbours and close inshore clean-up operations. The package is self-contained in a metal storage container for easy handling and storing of the system when not in use. The ocean mop system is based on the highly successful e-series range of products. It can vary in size and performance to suit ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Rotork piston actuated valves are manufactured with high performing components as a standard. PTFE and FKM seals, together with internals in AISI 316, offer outstanding compatibility and cover a wide variety of industrial applications. A wide choice of connections are available, including flanged, clamped and weld ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you