Pump Control Equipment For Water Pumping Available In Israel
-
ShowcaseManufactured by Finn Corporationbased in USA
Designed with time-tested features, the T330 HydroSeeder offers value, reliability and productivity to meet the needs of large-scale applications. The T330 features the highly efficient FINN proprietary centrifugal slurry pump with a 134hp John Deere diesel engine and an independently controlled pump ...
-
ShowcaseManufactured by Randolph Austin Companybased in USA
The 500-PHO is machined from an aluminum casting and has a stainless steel plate and shaft as well as stainless sleeved roller assembly. The pump is rugged, reliable, and easy-to-use. The 500-PHO is good choice for use from the laboratory to industrial applications such as paper & pulp, printing, metering, and fluid ...
-
ShowcaseManufactured by Skim-pakbased in USA
skim-pak series 600 is designed to remove floating contaminants including oils, foams and particulates from limited access and smaller skimming ...
-
PremiumManufactured by Excalibur Water Systems Inc.based in CANADA
Sureflo (SFIN Series) Commercial Reverse Osmosis Systems provide between 30 GPM (43,200 GPD) to 320 GPM (460,800 GPD) designed for 75% standard ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model LV2234E is a low volume air sampler consisting of a ¾ HP oil-less, carbon vane pump with a flowmeter, vacuum gauge and a constant airflow regulator for use where a nearly constant airflow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying the flow through a bypass valve into the pump. This system allows the pump to work at a minimum ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Fast Transfer: Transfer of nucleic acids to membranes during Southern or Northern analysis was traditionally done by capillary blotting, a time-consuming procedure that usually takes up to 12 hours. With vacuum blotting, transfer times can be reduced to 15 – 60 minutes, depending on the size of the ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Anguil’s advanced controls and automation systems provide the safest, most efficient, and highly reliable operation while integrating smoothly into existing plant operations. From new equipment to upgrades and retrofits, our systems utilize the latest in Programmable Logic Controller (PLC) based controls, touch screen interfaces, and remote ...
-
PremiumManufactured by Advanced Equipment and Services, Incbased in USA
Our Stationary RO Dialysis Water treatment Unit provides the required high standards water quality for any Dialysis center or hospital. The sizing of our equipments can be adapted based on the patient population of the center. ...
-
PremiumManufactured by Advanced Equipment and Services, Incbased in USA
Specifications: 30 membranes 8x40. 30 HP stainless steel RO pump. Weight: 3,600 lbs. (1,632kg). Size: 280x42x67 inch. (711x107x170 cm). 4” feed connection. 3” product connection. 2-1/2” reject ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
OEM Board for Fiber Optic Transformer Winding Hot Spot and Temperature Monitoring. Advanced Energy's Luxtron m924 utility module is a cost-effective OEM board that provides temperature monitoring with RS485 Modbus and RS232 ASCII digital communication. Four channels, expandable up to 64. Direct, accurate, and real-time transformer winding hot spot and temperature monitoring. Backward compatible ...
-
PremiumManufactured by Randolph Austin Companybased in USA
The 610-PHO (pump head only) is not your ordinary peristaltic pump. Machined from an aluminum housing with internal stainless steel components, the 610-PHO is rugged and reliable. The pump accepts either a 3/8″ or 1/2″ ID flexible tubing with a 1/8″ wall. The 610-PHO has a flow rate of up to 3.4 GPM at 400 RPM and can withstand the test of ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Lenntech engineers design and build tailor-made ultrafiltration plants. Our UF plants are build with hollow fiber outside-in membranes, up to 100 m3/h, to purify surface or groundwater from suspended solids, colloids and all kind of micro-organisms such as bacteria, virus, protozoa, germs and ...
-
PremiumManufactured by BioMicrobics, Incbased in USA
BioSTEP is a screened pumping system that places a submersible pump into a SaniTEE® screen to transfer effluent. The system features a ScumGuard® Protector to prevent floating scum from entering the ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
LennRO GREENLINE reverse osmosis system provides low conductivity water from tap water and low brackish water. Lenntech units are ready-to-use, skid mounted, easy to operate. The LennRO gREENLINE come with up to 6 installed Pressure vessel which can be isolated individually. Hereto the system can run on 1 membrane producing 250 l/h and with up to 6 membranes for a production of 1500 ...
-
PremiumManufactured by Sauereisen Inc.based in USA
ConoGlaze - Epoxy NovolaK 228C is a chemically-resistant, 100% solids, epoxy NovolaK coating system. It is used as a topcoat for Sauereisen ConoCrete or FibreCrete systems or as a coating to protect concrete and steel from chemical attack. 228C is carbon-filled and formulated specifically to resist hydrofluoric acid. ConoGlaze may be used in many kinds of manufacturing, processing, storage, and ...
-
PremiumManufactured by Sebright Products, Inc.based in USA
Bright Technologies offers complete Belt Filter Press dewatering systems that are skid or trailer mounted. We design and manufacture the skid equipment package for high throughput, low maintenance, superior cake solids and ease of ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
The float switch is made for liquid level monitoring and is appropriate for direct pump control in all industrial ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Lenntech ClO2 generators can produce up to 150 g/h of ClO2 for horticulture, bottled water disinfection or CIP ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Advanced Energy Innova 3433i is a highly accurate and reliable multi-gas monitor with a special configuration for Exhaust Gas or SHED evaporative testing. The measurement system, based on the photoacoustic infrared detection method, is capable of measuring almost any gas that absorbs infrared light. Gas selectivity is achieved through the use of optical filters. Selectively measures a wide ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
HI-Q Environmental Products Company's product line includes complete stack sampling systems, consisting of a specified type of probe, in-line filter holder, the transport line, sampling pump and flow controller. We recommend, design, and supply complete systems. HI-Q Environmental Products Company is able to make stack-sampling systems design suggestions by receiving your sampling requirements ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you