Sludge Pumps Equipment For Water Pumping Near Nova Scotia
-
Manufactured by Biorem Technologies Inc.based in CANADA
Complex odors associated with various municipal wastewater treatment processes can be difficult to treat. That is why Biorem offers a robust and cost effective approach by combining our biotrickling filters and biofilter technologies. The first stage consists of a customizable biotrickling filter that is used as a roughing scrubber to remove elevated hydrogen sulfide concentrations, allowing ...
-
Manufactured by Walden, Inc.based in USA
The best municipal technology is now available for residential and commercial use. Sequencing batch reactors (SBR’s) have been around for a long time. They were operating successfully long before flow-through, activated sludge systems were designed. In flow-based systems, variables in the flow can cause upsets and incomplete treatment. Because the SBR process is time-based rather than ...
-
Manufactured by Enviro-STEP Technologies Incbased in CANADA
BIO-REDOX is a pre-treatment unit designed to lower BOD and COD content of a high strength wastewater application such as restaurants, road service centers, food processing applications, ...
-
Manufactured by Blue Ribbon Corp.based in USA
The Model BC001 Birdcage ® Series from Blue Ribbon Corporation is a highly accurate level transmitter designed specifically for sludge level monitoring and pump lift stations. Its all stainless steel design incorporates a 3-inch diameter clog-resistant sensing diaphragm and corrosion resistant protective baffle plate. These features, combined with over 25 years of proven field service, make ...
-
Manufactured by Seepex Gmbhbased in GERMANY
Smart Air Injection is a SEEPEX system solution that is customized according to the individual requirements of the customer and their pumped media. It was initially developed for environmental applications and is particularly useful for pumping dewatered sludge with a dry matter content of 20-40% – whether in thermal processing, recycling or agriculture. The system uses compressed air and ...
-
PremiumManufactured by Cornell Pump LLCbased in USA
Cornell's N-series pumps are made to tackle challenging solids handling applications, with discharge sizes ranging from 1.25" to 30". These pumps are adaptable to various mounting options, including close-coupled, SAE engine-mount, horizontal frame-mount, and vertical coupled. They have enclosed impellers capable of handling up to 10" solids and 40,000 GPM flow, but also offer the option of a ...
-
Manufactured by Flo Trend - a Wassar Logistics Holdings, LLCbased in USA
The "Sludge Mate" Container Filter is a simple one step process for dewatering a variety of sludges. The Sludge Mate Container Filter has no moving parts, requires minimal labor, has extremely low maintenance, and is very economical to ...
-
Manufactured by Landia a/sbased in DENMARK
The DG-I pump is a series of submersible pumps, which are designed to pump heavily contaminated liquids, as well as liquids with a high dry matter content. All DG-I pumps are chopper pumps fitted with a knife system at the pump inlet. This ensures that the operation runs smoothly under conditions where many other pumps will have problems with ...
-
Manufactured by Verderflex Peristaltic Pumps - part of the Verder Groupbased in UNITED KINGDOM
Verderflex pumps stand apart from their competitors: reliable innovative, high performance, peristaltic pumps that pump difficult products in tough ...
-
Manufactured by Landia a/sbased in DENMARK
The MPTK-I pump is a series of pumps designed to pump heavily contaminated liquids, as well as liquids with a high dry matter content. MPTK-I can be fitted with a knife system at the pump inlet. This helps to ensure smooth operation in conditions where many other pumps have problems with ...
-
PremiumManufactured by Hydro Quip, Inc. (HQI)based in USA
Inclined Plate Clarifier with coated carbon steel. Hydro Quip’s Inclined Plate Clarifiers are designed and manufactured to provide for the precipitation and separation of suspended solids. Our design employs the use of a series of plates inclined at an angle of 45° or 55°. This specialized design allows the unit to perform all of the functions of a conventional solids contact ...
-
PremiumManufactured by Hydro Quip, Inc. (HQI)based in USA
The continuous flow Inclined Plate Clarifier with Mix & Flocc Tank separates mechanical and chemical emulsions and colloidal contaminants from wastewater as a single flow-through operation. The use of polymers or other chemical additives will help precipitate the contaminants to the hopper compartment for ...
-
Manufactured by JDI, Inc. / Washbay Solutionsbased in USA
Our single wall or double wall below ground parallel, corrugated plate oil/water separators meet and exceed API 421 requirements, removing essentially 100% of dispersed non-emulsified oil droplets in the waste stream. These separators are special purpose prefabricated parallel corrugated plate, cylindrical, gravity displacement oil water separators, containing an inlet compartment, sludge ...
-
Manufactured by ATB Water GmbHbased in GERMANY
In addition to our standard range of wastewater treatment plants with a connected load of up to 1,000 PE, we offer tailor-made solutions for small and medium-sized municipal applications. We see ourselves in this area as a product-independent planning and construction company for wastewater treatment plants with a capacity of up to 10,000 PE or 15,000 ...
-
Manufactured by ATB Water GmbHbased in GERMANY
Fully biological SBR wastewater treatment plant for multi-chamber tanks - for new construction and retrofitting. The "G" versions of the AQUAMAX® PRO have been specially developed for fluctuating and highly polluted wastewater from hotels, restaurants and food processing companies in sizes up to 50 PE or 7,500 litres/day. Costly adjustments to the tanks as well as installation and ...
-
Manufactured by ATB Water GmbHbased in GERMANY
ATB-CWE-P-Pump decanters are used to draw off the near-surface clear water layer at the end of a treatment cycle in an SBR plant by gravity with the aid of an integrated ...
-
Manufactured by ATB Water GmbHbased in GERMANY
For new installations according EN 12566-3 and for retrofitting of existing plants for the operation of a full-biological SBR plant. The plant is pre-assembled and approved by the German building authorities and can be assembled and installed into the designated tanks with a few manual ...
-
Manufactured by ATB Water GmbHbased in GERMANY
For new installations according EN 12566-3 and for retrofitting of existing plants for the operation of a full-biological SBR plant. The plant is pre-assembled and approved by the German building authorities and can be assembled and installed into the designated tanks with a few manual ...
-
Manufactured by ATB Water GmbHbased in GERMANY
Core package for assembling the technical equipment for a pressure-aerated AQUAMAX ZB small sewage treatment plant for up to 16 ...
-
Manufactured by ATB Water GmbHbased in GERMANY
This type of system can be implemented quickly and easily as a system based on standard components. The wastewater treatment plant has been specially designed for small settlements and villages as well as for catering, hotel and commercial businesses. By combining individual, modular SBR lines, wastewater treatment plant sizes from 50 to 1,000 PE or up to 150 m3/day can be realised. Depending on ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you