Submersible Pumps Equipment For Water Pumping Available In American Samoa
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Submersible pump "Gigant", ABS/Inox, Ø 36 mm, maximal capacity 11 l/min, pressure head lift 8.5 m (at final voltage 12 Volt), with strainer, with 5 m pvc coated cable, set of 3 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Flange, stainless steel, for connection of suspension cable to submersible pump Grundfos MP ...
-
PremiumManufactured by Zetaş Kimyabased in TURKEY
The location of the water tank is extremely important at the point of increasing the efficiency of use and creating a more spacious environment. The techniques and evaluations used in this regard are in accordance with the application principle and should overlap with the project. The underground water tank, which provides durable and trouble-free storage for many years, is one of the best ...
-
PremiumManufactured by Skim-pakbased in USA
The 17500-SH has flow-controlled weirs with adjustable flow rate capabilities. The flow control weir will automatically adjust to the flow rate being pumped. The Grinder Skimmer has a submersible grinder pump mounted to the undercarriage of the skimmer. The grinder blades are exposed to the bottom back of the skimmer sump. It will skimmer solids into the skimmer sump where the grinder blade chew ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Submersible pump Grundfos MP 1, centrifugal type for purging/sampling monitoring wells, stainless steel 316, pressure head lift maximal 86 m, adjustable capacity till maximal 1.8 m3/h, 220 V 1.1 kW, for connection to frequency converter, pump Ø 45 mm, 287 mm long. With mounted Teflon power cable 90 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Tube connection, stainless steel, for connection of tube with Ø 16 x 20 mm to submersible pump Grundfos MP ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Submersible pump Grundfos MP 1, centrifugal type for purging/sampling monitoring wells, stainless steel 316, pressure head lift maximal 86m, adjustable capacity till maximal 1.8 m3/h, 220V 1.1 kW, for connection to frequency converter, pump Ø 45 mm, 287 mm long. With mounted Teflon power cable 60 m. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Tube connection, stainless steel, for connection of tube with Ø 18 x 13 mm to submersible pump Grundfos MP ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Hose reel cart small, to transport tube, cable and pump. Capacity till 60 m tube. Inclusive holder for submersible pump, 5 leather straps to fix tube on reel and mounting ...
-
PremiumManufactured by Cornell Pump LLCbased in USA
The immersible motor is a unique concept that allows it to operate in flooded conditions up to 30 feet deep for up to two weeks. It offers the safety of a submersible motor and the convenience of off-the-shelf maintenance. The motor is a premium-efficiency, inverter-duty TECB (totally enclosed, blower-cooled) motor. The blower shuts down if the motor becomes submerged without affecting the main ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This low cost submersible pump set is suitable for use in monitoring wells with a diameter of minimal 40 mm. The set includes three submersible pumps “Gigant”, three booster pumps, a roll of extension cable, sealed crimp splices (to make a waterproof cable extension), a roll of polyethylene sampling tube and a battery with battery charger. Both pumps are small centrifugal pumps with ...
-
PremiumManufactured by Lutz Pumpen GmbHbased in GERMANY
High performance, compact dimensions, low weight - everything fits with the Lutz B6. The pump shaft is protected by a shaft guide tube against possible "attack" of the pumped medium. Perfectly suited for pumping and draining of neutral and aggressive liquids with low solids content. * on request also available in special immersion depths of 1000 - 3000 mm * Design according to the single pipe ...
-
PremiumManufactured by Lutz Pumpen GmbHbased in GERMANY
When circulating chemicals and pickling baths, reliability, safety and last but not least functionality are important. The submersible centrifugal pump was specially developed as a vertical, wet-installed pump for the rapid emptying of these liquids from tanks and basins. * available in special immersion depths on request * equipped with self-lubricating, liquid-wetted plain bearings. Features & ...
-
PremiumManufactured by Lutz Pumpen GmbHbased in GERMANY
The B80 KGK G3 series is a powerful and robust submersible centrifugal pump with plain bearings, drive lantern mounted on anti-friction bearings and IEC standard motor. The B80 KGK G3 series is designed in single or two-stage versions with one or two impellers for high flow rates. Multistage pumps are used to increase the delivery pressure while maintaining compact hydraulic dimensions and are ...
-
PremiumManufactured by Flydog Solutions OÜbased in ESTONIA
Our most advanced real-time integrated profiling system. Available for the floating platform of your choice. It consists of an autonomous winch/profiler, FlyBox data-logger and a web-based data management system powered by SensorNest cloud platform. Oscar can be installed onto any floating platform making it ideal for a variety of project requirements. ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The Pump Action Screen (PAS) is a simple and robust CSO mechanical screen which consists of a half round stainless steel basket with 6mm perforations, submersible pump, distribution pipework, and a venturi. It is designed to prevent the discharge of non-biodegradable solids greater than 6mm in two directions. The screening debris is scoured from the underside of the screen basket and punched ...
-
PremiumManufactured by BioMicrobics, Incbased in USA
BioSTEP is a screened pumping system that places a submersible pump into a SaniTEE® screen to transfer effluent. The system features a ScumGuard® Protector to prevent floating scum from entering the ...
-
PremiumManufactured by SRS Crisafulli, Inc.based in USA
Crisafulli Submersible Pumps come in all shapes and sizes. They can be powered hydraulically, or electrically. We build them to your requirements. There are many ways to customize your pump, to your specific application. Our submersible pumps can be built with a slurry gate, or with screens, or choppers. If your application is unique, contact our sales engineers and we'll help find the right ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
In principle it is possible to design the soil water permeameters in any required size. The size is determined by the number of soil samples of which the saturated water permeability is to be determined simultaneously. Designs for 5 up to 25 soil sample rings can be supplied. The permeameters are available for soil sample rings with an external diameter of 53 or 60 ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
Pump packer systems are used for depth-oriented pumping tests. The isolation of defined borehole sections is carried out with inflatable packers. The packer sleeve can be installed above or below the submersible pump, depending on the customer's requirements. A double packer configuration with submersible pump is also possible. The water can be pumped through the well pipe or a pumping tube. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you