Underground Pumps Equipment For Water Pumping Available In Bolivia
-
Manufactured by EMWG - Idro Groupbased in ITALY
GREEN LIFT stations are used for the accumulation and pumping of water. These pumping stations are designed in lightweight high density polyethylene which makes them easy to handle and install onsite. Installed below ground, GREEN LIFT pump stations permit water to be conveyed, pumped, up to above ground water treatment plants. They can also function as equalization/ homogenization chambers, a ...
-
Manufactured by Showfou Electric Machine Co., Ltd.based in TAIWAN
Power : 1,2,3 HP. Motor: IP68. Impeller made of Bronze. Easy Operating, no need of equipped devices, result in this less-maintenance, noise and vibration free pump. Rigid body, by using the special fined bronze and stainless steel, this will rise the pump the ability of water delivering life. ...
-
Manufactured by Hebei Tobee Group Co.,Limitedbased in CHINA
Hydroman® can supply rich submersible industrial sediment pump and submersible mining slurry pump models for silt and sludge, mining operations fighting against harsh environments both above and below ground, submersible dewatering pump Manage rainwater, improve seepage water management, and lower the water table to prevent ground water influx for open pit dewatering, and submersible underground ...
-
Manufactured by Gorman-Rupp Co.based in USA
Gorman-Rupp"s Below Ground Pump Station incorporates over 30 years of experience working with design engineers specifying performance and control features. This pre-engineered unit offers an extensive selection of pumps, motors, controls, piping and accessories. Units are delivered right to the job site, ready for lowering into position. All you do is hook up simple piping and power connections. ...
-
Manufactured by Zhejiang Fengyuan Pump Industry Co., Ltdbased in CHINA
Water cooled motor to ensure a long life in continuous and intermittent operation, with high efficiency and energy savings. Incorporating a dry motor with thermal auto-cut that prevents the motor from over heating. Greatly increased maximum submersion depth due to mechanical seal resistant to high pressure. The cast iron upper cover and strengthened AISI304SS pumps casing, which can provide ...
-
Manufactured by Tricel (Killarney) Unlimited Companybased in IRELAND
What is a wastewater pumping station? It is an extra tank connected to your septic tank or wastewater treatment plant. The pump station is usually installed when the ground level of the wastewater treatment system is too high. More specifically when it’s higher than the level of the property and a gravity tank cannot be used. Our domestic pumping system is used for the transfer of ...
-
Manufactured by Linkon Technology Co., Ltd.based in SOUTH KOREA
This is a type to open the cover and fix the handrail because a handrail is attached inside the manhole cover. This is good to apply to small ...
-
Manufactured by Royco Packagingbased in USA
Users of the discontinued MarvelPak #22 product will experience excellent results with VERSIL-PAK 3-2. VERSIL-PAK 3-2 is coated on two sides with high adhesion wax and laminated to polyester barrier film meeting all of the same specifications as the previous Marvelpak product. It is used as a tight wrap on underground piping, pumps and irregular shapes on oil field machinery, large electric ...
-
Manufactured by airPLUS1 Technologybased in LITHUANIA
Disinfection and odour removal for industries, including food industry. Designed for premises ranging 30-300 m3 and ventilation of up to 2000m3/h capacity. OTriKS.3 is also suitable for small (up to 500 m3) industrial facilities, such as small (underground) wastewater pumping stations and refrigerated warehouses for perishable food products (milk, meat, fish). Apart from that, it can be used for ...
-
Manufactured by Smith & Loveless Inc.based in USA
Tens of thousands of proven Smith & Loveless Non-Clog Pumps convey wastewater around the world, providing reliable service day-in and day-out. Our bold pump design retains several high standards, including oversized bearings and stainless-steel pump shafts, bronze mechanical seals for superior heat dissipation, close tolerances that prevent recirculation and a keyed and tapered shaft for ...
-
Manufactured by Smith & Loveless Inc.based in USA
The DUO-DUCT represents Smith & Loveless’ most innovative underground pump station design for smaller applications. It offers many outstanding benefits over conventional, packaged pump stations, because of its station design and durability. With increased work space because of the elimination of suction piping inside the station, and all the environmental equipment that makes the ...
-
Manufactured by Pipex px Limitedbased in UNITED KINGDOM
Manufactured from thermoplastic Homopolymer Polypropylene (PP-H), High Density Polyethylene (HDPE) or Polyinylidene Fluoride PVDF. The system includes pipework, manholes, pump chambers, floor drains and channels, all available in dual containment for Bio-security ...
-
Manufactured by Aquatec VFL s.r.o.based in SLOVAKIA
Vertical T underground plastic tanks are 100% water resistant tanks manufactured by the rotomoulding technology. Eliminating the possibility of groundwater occurence the tank is then placed on the reinforced concrete slab (or sub-base) 15 cm thick including the overlapping footprint of the tank by 20 cm. In 30 cm layers 4/8 gravel is used for backfilling the tank. Inspection holes in 600 mm ...
-
Manufactured by Aquatec VFL s.r.o.based in SLOVAKIA
Horizontal placed TH underground plastic tanks are 100% water resistant tank manufactured by the rotomoulding technology. Eliminating the possibility of groundwater occurence the tank is then assembled on the compacted sub-base of 25 cm of thickness including the overlapping the footprint of the tank by 20 cm. In 30 cm layers 4/8 gravel is used for backfilling the tank and make up the sub-base. ...
-
Manufactured by Zenit Europe S.A.based in LUXEMBOURG
Suitable for use with clear or slightly soiled wastewaters containing small solids, strained water, rainwater, seepage and water pumped from underground, where high pumping rates are required. This electric pump is intended for both domestic and professional use. General features: Deliveries GAS 1 1/4' - 2'. Motor poles 2. Passages max 15 mm. Powers 0,37 ÷ 1,5 kW. Multi-channel open ...
-
Manufactured by DRYCAKE - TWISTER DEPACKAGERbased in CANADA
Designed to be installed into sumps, manhole chambers, underground chambers, pumping stations, etc. DRYCAKE vertical screens provide a solution to facilitate lifting, washing, dewatering, compaction of solids and improving the performance and reliability of drainage ...
-
Manufactured by Tricel Environmentalbased in UNITED KINGDOM
At Tricel we manufacture both packaged and custom-designed below ground pump stations for foul water or ...
-
Manufactured by Bioflow Industries Pvt Ltd.based in INDIA
A PVC water stopper is a flexible strip or joint made from high-quality polyvinyl chloride (PVC) material. Its primary purpose is to prevent the passage of water through construction joints, expansion joints, and other vulnerable areas in concrete structures. PVC water stoppers act as barriers, effectively sealing joints to ensure water tightness and prevent leakage. Bioflow Industries Pvt ...
-
Manufactured by SIMFLO Pumps Inc.based in USA
The motor stand shall be of ASTM A53, grade B fabricated steel designed with sufficient strength and rigidity to support the motor mounted on it and carry the suspended weight of the attached column and bowl assemblies. The design shall permit a two-piece head shaft to be coupled above the packing box. The bottom face of the motor stand shall be circular and fully ...
-
Manufactured by Smith & Loveless Inc.based in USA
Tens of thousands of proven Smith & Loveless Non-Clog Pumps convey wastewater around the world, providing reliable service day-in and day-out. Our bold pump design retains several high standards, including oversized bearings and stainless-steel pump shafts, bronze mechanical seals for superior heat dissipation, close tolerances that prevent recirculation and a keyed and tapered shaft for ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you