Gas Treatment (Activated Carbon Treatment) Equipment Available In Bosnia & Herzegovina
-
PremiumManufactured by Jacobi Groupbased in SWEDEN
Activated carbons designed for air and gas treatment, covering a diverse set of applications including VOC abatement in air, odour control, solvent recovery, process gas purification, residential and commercial air treatment devices, cigarette filters, and cabin air filters and evaporative loss devices in automobiles. ...
-
Manufactured by Aprovis Energy Systems GmbHbased in GERMANY
The FriCon system cools and dehumidifies process gases for further use in combined heat and power plants or biogas treatment plants. This optimises the combustion process and increases operational reliability. Plant downtimes can also be reduced. By cooling the gas stream, the moisture it contains condenses and can be removed from the ...
-
Manufactured by Envirotek Aritma Teknolojileri Sanayi Ve Tic. A.S.based in TURKEY
All types of exhaust gases and odor coming from processes and boilers can be treated by appropriate technology and systems. Turnkey applications, design, equipment supply, installation of gas treatment systems are also in our scope of supply. We can manufacture wet scrubbers from AISI 304, AISI 316, GRP, polypropylene or polyethylene ...
-
Manufactured by China Xicheng EP Ltdbased in CHINA
Activated carbon adsorption box is an economical and practical flue gas treatment system for organic waste gas with compliance rate; it is an environmental protection equipment product for waste gas filtration and adsorption of peculiar smell. The activated carbon adsorption box has the advantages of high adsorption efficiency, ...
-
Manufactured by General Carbon Corporationbased in USA
GC Powdered FG activated carbon is a virgin carbon. Derived from selected grades of bituminous coal, its surface area and pore volume make it ideal for use on flue gas applications, including the removal of mercury, dioxins, furans and other VOC ...
-
Manufactured by National Environmental Systems (NES)based in USA
The vapor removed from contaminated soil using the Soil Vapor Extraction (SVE) technique must be treated to remove the hazardous components. Two methods are generally available – treatment using activated carbon or combustion treatment. Selecting either option is dependent on various factors: VGAC – Vapor Phase Granular ...
-
based in USA
Activated carbon has a complex pore structure with a very large surface area. Odorous compounds are transferred from the air being treated to the surface of the carbon as the air is forced through the carbon bed. There is a physical attraction between the compound and the carbon once contact is made which causes a bonding. The compounds will continue to adsorb onto the surface of the carbon ...
-
Manufactured by Prodesa Medioambientebased in SPAIN
This technology is based on the adsorption properties of activated carbon or zeolites. Thanks to their porosity, they can adsorb a great part of the organic compounds in the ...
-
Manufactured by Prodesa Medioambientebased in SPAIN
This technology is based on the activated carbon properties: thanks to its porosity, it is possible to adsorb the greatest part of the organic compounds and extract them through means of nitrogen or ...
-
Manufactured by Centrotherm Clean Solutions GmbH & Co. KGbased in GERMANY
are individually adapted to your specific requirements, especially total gas stream and facility. This ensures a cost-effective VOC ...
-
Manufactured by Santes Incineratorbased in TURKEY
The reactor relies on active carbon as absorption medium for the reaction to adsorb heavy metals and dioxin &furans. Dioxins and furans, having been destroyed in the post combustion chamber, can form again in the subsequent heat exchanger because of the cooling procedure. Activated carbon is added to the lime to absorb dioxins and ...
-
Manufactured by Hitachi Zosen Inova AGbased in SWITZERLAND
The Xerosorp process removes acidic gases by adsorption with sodium bicarbonate. Due to the very high reactivity of sodium bicarbonate, only little overdosing is required which minimizes reagent consumption and residue generation. In addition, activated carbon or coke can be injected for removal of volatile organics and metals. The process is nearly independent of temperature and thus allows ...
-
Manufactured by Tri-Mer Air Pollution Control Systemsbased in USA
SorbSaver is a simple, cost-effective retrofit for dry sorbent injection / activated carbon injection systems. Dry sorbent injection is widely used to reduce a range of pollutants. While these systems have a low capital cost when compared to alternative technologies, continued operation has shown the lance-based method of injecting sorbent involves inefficient mixing and dispersion, and frequent ...
-
Manufactured by Likusta Umwelttechnik GmbHbased in GERMANY
Microporous structure allows high adsorption rates; Activated carbon is fine-grained carbon with a highly porous structure and a very large surface. It is used industrially for eliminating unwanted harmful substances or odours from gases, vapours and liquids or for the recovery of residues. The substances are bound to the activated carbon by adsorption. Activated carbon is used as a powder, ...
-
Manufactured by Tri-Mer Air Pollution Control Systemsbased in USA
. This hot gas filtration system is completely dry, with no water consumption. Disposal of the dry collected waste is straightforward. Large gas flow volumes can also be accommodated. UltraCat also has an add-on component to eliminate burdens associated with dry sorbent injection, SorbSaver. ...
-
Manufactured by Hitachi Zosen Inova AGbased in SWITZERLAND
The HZI SemiDry process employs the principle of the circulating fluidized bed for efficient removal of acid gases by adsorption with hydrated lime. Recirculation of reagent maximizes reagent use and provides excess reagent to capture contaminat peaks. In addition, activated carbon or coke can be injected for removal of volatile organics and ...
-
Manufactured by Dusconbased in ITALY
there is the problem of Mercury, Heavy Metals & Dioxins in ...
-
Manufactured by Santes Incineratorbased in TURKEY
. Therefore, bag filters are placed to Santes Flue Gas Treatment Systems in order to remove reacted heavy metals and unreacted activated carbon from the Flue Gas. Within Jet Pulse cleaning mechanism of the Bag Filter, diaphragm valves are used for each filter bag. There are also timers and pressure difference mechanism for the bag filters to ...
-
Manufactured by F-DGSibased in FRANCE
Characteristics: Combination of sub micro filter, activated carbon adsorber and high performance particle filter (compressed air quality class 1 acc. to ISO 8573-1:2010). 3 purification stages in one filter (space savings up to 60% vs. traditional solutions). Use of the Economizer for monitoring / controlling of the element. Intelligent overall concept meets the requirements for the use as a ...
-
Manufactured by Carmeuse Americasbased in USA
For many utilities and industrial applications, dry sorbent injection (DSI) of hydrated lime offers impressive advantages over the wet or semi-wet flue gas desulfurization systems for controlling the emissions of SO2, HCl, HF, SO3 and even Hg. These potential advantages include ease of retrofit, dry waste and low capital investment. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you