Advanced Water Treatment Equipment For Water And Wastewater In Idaho
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme GasPost II toxic gas sensor/transmitter measures CO and NO2 gas concentrations in enclosed areas and transmit its readings to a CEL-series monitor/controller over an addressable RS-485 “Daisy-Chain” sensor ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme TwinSet and its microprocessor-based system feature a high-quality stand-alone controller providing all the necessary hardware for the continuous monitoring of two gases in the following combinations: CO/CO, CO/CO2, CO/ NO2, CO/COMB. This unit is primarily geared towards providing alarm-activated relays for simple applications such as small parking ...
-
Manufactured by Nexombased in CANADA
Fully denitrify your wastewater: If you have nitrate or total nitrogen limits (or anticipate future limits and want to be ready), you need a system that can efficiently remove nitrates. Save space, time and money: Within the tight budgets imposed upon municipalities, implement an effective solution that doesn’t break the capital expenditures bank or multiply operating expenditures down the ...
-
Manufactured by Spunstrand Inc.based in USA
Capabilities and Variations Spunstrand® Inc. has been manufacturing filament wound fiberglass reinforced plastic duct and piping for over forty years. Variations in resin, glass, liners, wall thickness, and their applications in corrosive air, HVAC, or fluids, are as diverse as the markets we serve. We have made just about every size and shape imaginable and even provided insulated industrial ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
An aerator for odour and corrosion control in sewer force main discharge, sewer wet wells, storage tanks and irrigation ...
-
Manufactured by Spunstrand Inc.based in USA
Spunstrand Inc. manufactures both Zero-Leak (ZL) and Balancing Dampers (BA) for the corrosive fume handling industry for a variety of environments and applications. These dampers can be used to regulate air flow and/or isolate a particular part of a system. They are constructed of FRP providing a durable corrosion resistant product that can be used for numerous industrial applications such as: ...
-
based in USA
The Edwards Gas Reactor Column (GRC) gas scrubber uses a unique hot bed reactor technology to handle gas flows up to 60 slpm and destroy hazardous gases to below TLV (Threshold Limit Value) levels. GRCs require no water supply and present no duct corrosion issues associated with the back-streaming of moisture. Reactive process by-products are chemically converted to harmless inorganic salts ...
-
Manufactured by Nexombased in CANADA
Reduce TAN to <1mg/L: You need to achieve effluent Total Ammonia-Nitrogen levels down toSave space, time, and money: You'd like to do it on a compact footprint, and as usual, the simpler to operate and more inexpensive the solution, the ...
-
Manufactured by Global Mold Incorporatedbased in USA
Global Mold’s Multi-Pollutant, High Rate Biomedia (MPHR Biomedia). MPHR is designed as a suspended media for improving the performance of activated sludge wastewater treatment plants (WWTP). It offers all the benefits of IFAS systems, without any of the disadvantages of fixed media. Its unique design consists of a high impact resistant, high surface area plastic extruded media, which ...
-
based in USA
Byo-Gon PX-109 Organic has proven time and time again to effectively work in wastewater treatment facilities in every market in which it has been tried. Using this product actually speeds up the treatment process and can do the following, based on application rates and points of ...
-
Manufactured by Nexombased in CANADA
New effluent quality regulations or changes to the ultimate discharge point of a wastewater treatment system can require that a system meet new Total Nitrogen (TN) effluent limits. For wastewater treatment systems requiring TN removal, a de-nitrification unit process for nitrate removal follows the SAGR nitrification ...
-
Manufactured by Nexombased in CANADA
Meet ultra-low phosphorus limits: Are you facing phosphorus or metals limits that you are unable to meet? Save money with a more efficient design: Tired of balancing dosing rates, floc quality and the excess tankage required for flocculation? There is a more efficient ...
-
based in USA
The WasteStation™ is a portable advanced thermal oxidation system. It is modular and scalable to handle growing waste ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
PVC & CPVC Ventilation Duct: IPEX PVC & CPVC ventilation duct systems provide effective solutions for industrial ventilation, protecting workers and the environment from contaminated ...
-
Manufactured by Nexombased in CANADA
Total ammonia in wastewater is comprised of un-ionized ammonia (NH3) and ionized ammonia (NH4+). The ratio of un-ionized to ionized ammonia is a interrelation of pH and temperature. The un-ionized portion is toxic to fish at low concentrations, and wastewater treatment systems that discharge to flowing streams typically have ammonia or toxicity limits to protect fish living in the receiving ...
-
Manufactured by Spunstrand Inc.based in USA
With the 2003 acquisition of an existing FRP Tank manufacturing company, Spunstrand® Inc. added significant large diameter filament winding capability, which enhances our product offering significantly. Spunstrand® Inc. now has a dedicated facility for manufacturing chemical and water storage tanks, carbon scrubbers and custom FRP products that will serve our primary industrial and ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
Designed to meet the requirements of the most severe industrial applications. Reliability and safety. Provides linear flow regulation. Patented Dual Block mechanism. The new VKR combines the reliability and safety features of the IPEX VKD ball valve with a newly designed profiled ball. The patented ball design provides linear flow regulation throughout its full range of operation even when the ...
-
Manufactured by Nexombased in CANADA
Reduce BOD/TSS: Improve Biological Oxygen Demand and suspended solids removal performance to meet lower limits without constructing additional lagoons. Increase capacity: Upgrade the lagoon to increase the design capacity of the system and accommodate new industrial contributions or community growth. Reduce energy consumption: The old aeration is using a lot of power to little effect. Upgrade ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
Effective solutions for industrial ventilation systems, protecting workers and the environment from contaminated ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
THE IPEX SYSTEM ADVANTAGE: Introducing IPEX vinyl process piping systems – A complete line of pipe, fittings, flanges, strainers and valves to meet all your process system requirements. IPEX manufactures the Xirtec® PVC and Xirtec® CPVC systems to meet industry demands for a complete Pipe, Valves and Fittings (PVF) package that is designed, produced and backed by a single ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you