Advanced Water Treatment Equipment For Water And Wastewater Near Pakistan
-
Manufactured by DDI Heat Exchangers Inc.based in CANADA
The 3 key advantages of our DDI technology are due to our Patented Technology of Rectangular channeled heat exchangers.It is not the common tube-in-shell technology nor the common Spiral structure of heat exchangers. WE BUY YOUR WASTE. Worlds only direct SLUDGE TO SLUDGE heat ...
-
Manufactured by Beko Technologies Corp.based in GERMANY
It is particularly cost-effective to dry precisely the quantity of compressed air which the customer actually needs. However, the full saving potential can only be used when this amount of compressed air is dried exactly to the respectively required degree. With this, drying is directly geared to the application itself. What is generally required is highest reliability and immediate availability ...
-
Manufactured by Aquatreat bvbabased in BELGIUM
In the purification of industrial and domestic waste water coagulation and flocculation are important steps. These steps are responsible to create a good flocculation of the macroscopic particles which increases the efficiency and rate of the sedimentation. For an optimal process the choice of the proper coagulant and flocculants is of great importance. There is a wide variety in these products ...
-
Manufactured by Pollution Engineerings (M) Sdn.Bhd.based in MALAYSIA
PEMSB has vast experiences in the design, construction and upgrading of different types of wastewater treatment plants for different ...
-
Manufactured by EK Engineeringbased in INDIA
Fischer NB10 is well probe from liquid level monitoring of water or liquid containers and bodies including dams, tanks etc. It has long term measuring stability with high accuracy and corrosion-resistance. NB10 uses principle of hydrostatic pressure measurement principle, and thus can monitoring two 250 meter ...
-
Manufactured by MANTECH Inc.based in CANADA
The Automated L100 PeCOD® COD Analyzer provides unattended analysis for a large number of ...
-
Manufactured by MANTECH Inc.based in CANADA
The world’s fastest method for chemical oxygen demand (COD) analysis is also available in a portable field unit. Just add the battery and carrying case and COD can be measured in the field without the need to transport toxic or hazardous ...
-
Manufactured by MANTECH Inc.based in CANADA
The PeCOD® TOC Analyzer is the optimal solution for measuring the chemical reactivity and associated oxidative changes in Natural Organic Matter. (NOM) As a result, it is more sensitive than Total Organic Carbon (TOC) and UV254 to changing NOM concentrations in source and treated drinking waters. For this reason, the PeCOD® can be implemented as an “Optimized” TOC Analyzer, providing a critical ...
-
Manufactured by MANTECH Inc.based in CANADA
The Benchtop L50 PeCOD COD Analyzer is MANTECH’s base model for use in industrial, municipal or government and academic lab ...
-
Manufactured by atg UV Systems - a brand by EVOQUA Water Technologies LLCbased in UNITED KINGDOM
Ti02 Advanced Oxidation Process (A.O.P.) for Trace Organic Contaminant Removal atg UV Technology has recently developed a chemical-free Advanced Oxidation Process (AOP) known as Keratox for the treatment and removal of organic and chemical contaminants from municipal drinking water and ...
-
Manufactured by atg UV Systems - a brand by EVOQUA Water Technologies LLCbased in UNITED KINGDOM
The UVLW series, designed for municipal wastewater treatment and industrial wastewater discharges, features the very latest in low-pressure Amalgam UV lamp technology and optimised UV chamber design to deliver amazing performance at a fraction of the size and operational power compared to standard low-pressure UV ...
-
Manufactured by atg UV Systems - a brand by EVOQUA Water Technologies LLCbased in UNITED KINGDOM
Over 100 years ago, German scientists discovered that the top surface of lake-water was sterile when exposed to sunlight. Further Investigation led to the discovery of Ultraviolet (UV) light. Ultraviolet light has many beneficial properties. UV light into four main categories, UV-A, UV-B, UV-C and Vacuum UV. The area between 240 and 280 nanometres (nm) is UV-C, known as the germicidal region. ...
-
Manufactured by Hydranautics A Nitto Denko Companybased in USA
Hollow Fiber Membranes for Membrane Bioreactor Applications in Wastewater Treatment. HYDRAsub is used for MBR applications to treat any effluent (sewage or industrial source) with a significant biological activity. Compared to conventional activated sludge treatment, HYDRAsub produces high quality permeate water suitable for RO treatment and reduces drastically footprint by elimination of ...
-
Manufactured by Sierra Instruments, Inc.based in USA
The ChlorineTrak 760S has been specifically designed to perform as an accurate and cost-effective mass flow measurement solution for chlorine injection processes found in typical waste-water treatment applications. Given the corrosive nature of chlorine gas (particularly in the presence of moisture), extremely expensive Hastelloy was needed for main flow body construction. And this drove the ...
-
Manufactured by Sierra Instruments, Inc.based in USA
The QuadraTherm 780i is the most accurate inline thermal mass flow meter for air / gas mass flow rate measurement on the market today, achieving gas mass flow rate accuracy never before possible, +/- 0.5% of reading above 50% of full scale. The QuadraTherm rivals accuracies of Coriolis technology for measuring gas mass flow rate with a breakthrough thermal dispersion technology achieving ...
-
based in PAKISTAN
Cooling water treatment chemicals Boiler water treatment chemicals Chilled / Hot water treatment chemicals Waste water treatment chemicals ...
-
Manufactured by Spire Metering Technology, LLC.based in USA
A member of the EnduroFlow Series, the EF40 Ultrasonic Flowmeter is the first member of the 4th generation ultrasonic flow meters from Spire Metering. Compared with its predecessors, the 4th generation flowmeters feature advanced multi-frequency flow measurement technology, thus, offering wider pipe size coverage, better accuracy and richer features. The EF40 ultrasonic flowmeter is designed to ...
-
Manufactured by Spire Metering Technology, LLC.based in USA
The SpireMag series MAG888-DC flowmeter is a battery-powered high-performance magnetic water meter designed for water and wastewater industry to accurately measure the water flow in closed conduits. MAG888-DC is ideal for remote locations in municipal, irrigation, wastewater treatment and industrial liquid processes industries where no power connection is ...
-
Manufactured by Spire Metering Technology, LLC.based in USA
Spire Metering is proud to present the smallest yet powerful portable flowmeter /BTU meter on the market! Our innovation never stops! This Handheld Ultrasonic flow and BTU meter, RH40, is a revolutionary portable meter with numerous features and powerful functions. It is the most compact and mobile portable flow/BTU meter on the market. The meter is completely portable and relies on clamp-on ...
-
Manufactured by Spire Metering Technology, LLC.based in USA
SpireMag Series MAG888 high-performance magnetic flowmeter accurately measures the flow volume of any conductive liquids, such as water, salt water, sewage, pulps, slurry, acid, alkali, or, any mixtures of liquids and solids which have a specific minimum of electric conductivity. SpireMag Series MAG888 has been widely used in municipal, wastewater treatment, irrigation,chemicals, as well as ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you