Water & Wastewater Applications in Asia & Middle East

  • Premium

    Oil Spill Eater II (OSE) for energy storage and fuel storage leaks

    The OSEI Corporation manufactures a first response bioremediation product Oil Spill Eater II that has been used to clean up leaks around storage tanks from valve breaks, line breaks and small holes in tanks, as well as for tank sludge clean outs. OSE II has been cleaning up oil/hydrocarbon based spills including heavy oils, sludge, drilling mud, tailings as well as refined product since 1989.

    By OSEI - Oil Spill Eater International, Corp Distributor in Ruby Industrial Complex, SINGAPORE.

  • Premium

    Pool Water Testing / Spa Water Testing

    Anyone and everyone who is responsible for operating and maintaining a swimming pool or spa has to test, monitor, and control complex, interdependent chemical factors that affect the quality of water bathers are immersed in. Additionally, aquatic facilities operators must be familiar with all laws, regulations, and guidelines governing what these parameters should be.

    By Myron L Company Distributor in CHINA.

  • Premium

    Air pollution control for the remediation industry

    The remediation division of Anguil Environmental Systems (formerly known as Global Technologies) is focused on treating emissions and water contaminants extracted from below the earths` surface. Formed shortly after the 1990 Clean Air Act targeted emissions associated with the extraction of polluted compounds from contaminated sites, Global subsurface remediation equipment has been successfully applied on contaminated sites in North and South America, Europe, Asia and Australia.

    By Anguil Environmental Systems, Inc. Office in Taipei, TAIWAN.

  • Premium

    VOC and HAP Abatement

    As is the case for many industrial manufacturing processes, emissions are best destroyed through the use of thermal and catalytic oxidation technologies. Volatile Organic Compounds (VOCs) and Hazardous Air Pollutants (HAPs) are destroyed through the use of high temperature combustion with direct heat recovery. The harmful air pollutants are converted to heat, water vapor and carbon dioxide, creating a destruction efficiency greater than 99%.

    By Anguil Environmental Systems, Inc. Office in Taipei, TAIWAN.

  • Premium

    Air pollution control for the natural gas processing industry

    The natural gas industry has seen a significant increase in activity with the discovery of new shales located throughout the world. The development of advance drilling technologies allow for extraction of gases deeper in the earth, revolutionizing the industry while creating a new demand for air and water pollution control technologies.

    By Anguil Environmental Systems, Inc. Office in Taipei, TAIWAN.

  • Premium

    Oxidation Reduction Potential (ORP)/Redox

    Oxidation Reduction Potential or Redox is the activity or strength of oxidizers and reducers in relation to their concentration. Oxidizers accept electrons, reducers lose electrons. Examples of oxidizers are: chlorine, hydrogen peroxide, bromine, ozone, and chlorine dioxide. Examples of reducers are sodium sulfite, sodium bisulfate and hydrogen sulfide. Like acidity and alkalinity, the increase of one is at the expense of the other.

    By Myron L Company Distributor in CHINA.

  • Premium

    Water & wastewater treatment solutions for commercial industry

    From cutting-edge MABR wastewater treatment to containerized desalination, Fluence delivers cost-effective and sustainable solutions for commercial customers worldwide. Fluence has more than 30 years of experience in the design, construction, and operation of water and wastewater treatment plants for commercial clients, including resorts, golf courses, commercial buildings, and campuses.

    By Fluence Corporation Office in Beijing , CHINA.

  • Premium

    Water treatment solutiions for power industry

    Fluence has decades of experience providing sustainable treatment solutions for power industry process water and effluent. Industrialization and population growth are spurring the demand for power around the world, putting pressure on fuel and water resources. At the same time, power producers face strict pollution and air-quality controls.

    By Fluence Corporation Office in Beijing , CHINA.

  • Premium

    Hand-Held & process control water testing instrument for Boilers and cooling towers

    Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level can...

    By Myron L Company Distributor in CHINA.

  • Premium

    Hand-Held & process control water testing instrument for Circuit board cleanliness testing industry

    Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-28809 has been used as a guideline for control. Now a simple `on line` test for the relative measurement of ionic contamination has been developed. This fast and economical method for testing circuit board cleanliness uses a Myron L...

    By Myron L Company Distributor in CHINA.

  • Premium

    Hand-Held & process control water testing instrument for Deionized water testing industry

    Years ago, high purity water was used only in limited applications. Today, deionized (Dl) water has become an essential ingredient in hundreds of applications including: medical, laboratory, pharmaceutical, cosmetics, electronics manufacturing, food processing, plating, countless industrial processes, and even the final rinse at the local car wash.

    By Myron L Company Distributor in CHINA.

  • Premium

    Water treatment For Hemodialysis industry

    Controlling dialysate quality is critically important to hemodialysis patient health. Complications as minor as nausea and fatigue or as severe as metabolic acidosis and sepsis can result if dialysate composition is incorrect. All the factors that ultimately affect dialysate composition must therefore be carefully monitored and controlled: proper proportioning and mixing of concentrates with water; the quality of water mixed with concentrates to form dialysate; and the quality of water used in the reprocessing of...

    By Myron L Company Distributor in CHINA.

  • Premium

    Hand-Held & process control water testing instrument for for Environmental industry

    Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation`s waterways. Today, in many...

    By Myron L Company Distributor in CHINA.

  • Premium

    Water Testing for Textile Manufacturing

    The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before...

    By Myron L Company Distributor in CHINA.

  • Premium

    Analytical instruments for oil and gas industry

    When it comes to ensuring product quality and optimizing processes, identifying elementary impurities is absolutely essential for quality control laboratories in refineries and in the production of secondary fuels. We can provide you with a variety of detection solutions developed for industrial routine applications with very high sample volumes as well as for experimental laboratories with frequently alternating areas of focus in their chemical analysis. Analytik Jena’s diverse range of solutions keeps you...

    By Analytik Jena - an Endress+Hauser Company Office in Hanoi City, VIETNAM.

  • Premium

    Oil Spill Bioremediation

    The OSEI Corporation manufactures a first response bioremediation product Oil Spill Eater II that has been used to clean up leaks around storage tanks from valve breaks, line breaks and small holes in tanks, as well as for tank sludge clean outs. OSE II has been cleaning up oil/hydrocarbon based spills including heavy oils, sludge, drilling mud, tailings as well as refined product since 1989.

    By OSEI - Oil Spill Eater International, Corp Distributor in Ruby Industrial Complex, SINGAPORE.

  • Premium

    Air pollution control for the rubber curing industry

    One-time, on-site final destruction of particulates. This is the key benefit gained from an Anguil solution to the emissions generated by the rubber curing process. Other advantages of an Anguil solution include the elimination of visible blue haze, guaranteed destruction efficiency compliance, and the elimination of costly mechanical filtration media and the lingering liability issue associated with filter disposal.

    By Anguil Environmental Systems, Inc. Office in Taipei, TAIWAN.

  • Premium

    Hand-Held & process control water testing instrument for Fountain solutions

    Accurate fountain (dampening) solution concentration control is essential for consistent, high-quality results in lithography. Low concentration can cause drying on the non-image area of the plate resulting in tinting, scumming, blanket piling, etc. High concentrations, on the other hand, bring about over-emulsification of the ink. This results in weakening of color strength and changes in ink rheology (body and flow properties). Correct concentration will allow the non-image areas of the plate to be appropriately...

    By Myron L Company Distributor in CHINA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you