Water & Wastewater Applications in Europe

  • Premium

    Ozone Water Treatment for Industrial Water Treatment

    Industrial waste water treatment is a complex area. With Primozone you get at complete partner who can customize an ozone water treatment solution for you. Our ozone generators and ozone water treatment systems are robust and maintenance free. The modular design allows for stepwise upgrades. As a partner we can provide a complete system design or stand alone ozone generator sales. We have mobile pilot test equipment and are happy to do pilot tests to get the perfect solution. We can adapt our solutions to fit yours.

    By Primozone Production AB based in Löddeköpinge, SWEDEN.

  • Premium

    Waste to Energy

    We can treat the air streams from waste management plants, MBT (Mechanical Biological Treatment) reception and composting areas, Waste Water Treatment Plants (WWTP), Refuse Derived Fuel (RDF) Plants, gasification of waste, syngas, torrefaction, gas engines and biogas upgrading. In waste management plants and WWTP, we remove the odors that may be causing a nuisance to neighbors, with bioreactors using Biomass to degrade odorous components and where odors are particularly intractable or VOC emissions higher, thermal oxidizers to meet prescribed emission limits and odor levels. In RDF Plants, Syngas, Gasification, Gas Engine and Biogas Upgrading applications, we employ thermal oxidizers, particulate removal and DeNOX systems, for the control of VOC, NOx, CO and particulates to prescribed emission limits.

    By Babcock & Wilcox MEGTEC LLC Office in Standish, UNITED KINGDOM.

  • Premium

    Water & wastewater treatment solutions for municipal industry

    Fluence has decades of experience delivering sustainable water and wastewater solutions to communities large and small. Fluence has more than 30 years of experience in the design, construction, and operation of water and wastewater treatment plants for municipal clients, government entities, communities, emergency relief, and private use.

    By Fluence Corporation Office in Padova, ITALY.

  • Premium

    Water & wastewater treatment solutions for industrial

    Fluence has decades of experience delivering cost-effective and sustainable treatment solutions for a wide range of industries.

    By Fluence Corporation Office in Padova, ITALY.

  • Premium

    AutoChem - Organic Synthesis

    Today, pharmaceutical and fine chemical companies face major challenges posed by globalization, environmental regulation, and shortened product life cycle that affect all aspects of their business. The research and development of an optimized chemical synthesis route must be carried out in less time and with less chemical waste to ensure a robust and economic process that can be efficiently scaled to manufacturing while meeting constraints related to product yield and purity, process and worker safety, and environmental concerns.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Process Analytics - Wastewater Applications

    Control of wastewater is increasingly becoming important to avoid potential environmental and increasing legal consequences. Accurate pH, O2, conductivity and turbidity measurements are critical in modern wastewater treatment. METTLER TOLEDO offers reliable, cost-effective solutions to control industrial effluents.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Industrial Weighing - Inventory Control

    Maximizing inventory turnover increases profitability. METTLER TOLEDO has a wide range of products all designed to enhance your ability to control inventory, making operations more efficient, and ensuring material security. In many facilities around the world, Mettler Toledo equipment acts as the execution/accounting system for incoming and outgoing goods as well as products, which are routinely controlled, or cycle counted.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Transport & Logistics - Revenue Recovery

    If you owned a gas station, would you let your customers tell you how much gas they used and not check it? Parcel and pallet measurements provided by customers are normally done manually and are often inaccurate. Only through re-dimensioning and re-weighing these items, is a shipper able to invoice customers based on accurate data and recover revenue that otherwise would have been lost.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Air pollution control for the food and bakery industry

    Anguil`s Food and Bakery industry experience provides reliable solutions for your emission control challenges. We have worked on a wide range of applications: achieving a high destruction level of ethanol from bakery ovens, chaff and particulate from coffee roasting, efficiently destroying grease from frying and rendering operations, handling smoke house emissions, and maintaining required opacity and odor levels from confectionery and gum manufacturing.

    By Anguil Environmental Systems, Inc. Distributor in UNITED KINGDOM.

  • Premium

    Odor control for food processing

    Safely Eliminate Odors Created By Food Processing: Malodors generated by the food processing industry vary enormously since they can be generated in the production, processing, and wastewater treatment areas of the plant. Regardless of the source, all of these odors may be offensive to the public.

    By OMI Industries (OMI) Distributor in Vienna, AUSTRIA.

  • Premium

    Water monitoring technology for flow & discharge

    Measuring water flow and discharge to determine the amount of water flowing through an open channel is critical for predicting water availability and flood events, allocating watering, and more.

    By The OTT Hydromet Group based in Kempten, GERMANY.

  • Premium

    Water monitoring technology for nutrient monitoring

    Continuous monitoring of nutrient levels provides crucial information about daily, seasonal and event based changes in water quality conditions, and can be a strong indicator on the overall health of the water body.  In recent years, monitoring of nutrients has grown in importance as it has come to the forefront in regulatory compliance of water quality in many regions.

    By The OTT Hydromet Group based in Kempten, GERMANY.

  • Premium

    Analysis of Herbicides in Drinking Water

    Herbicides are used throughout the world to combat the growth of unwanted plant life. These polar compounds are hydrophilic, so they may find their way into drinking water sources. While gas chromatography has historically been the preferred technique for analysis of herbicides in water samples, the use of LC-MS/MS for this application is gaining acceptance. This is due to the power of MS/MS to provide detailed identification of multiple analytes, but also in part due to the variety of HPLC stationary phases that are available. In particular, several HPLC phases are available that provide great retention and peak shapes for polar analytes, such as herbicides, even under mostly aqueous mobile phase conditions. The combination of these factors may possibly eliminate need for time-consuming sample preparation.

    By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY.

  • Premium

    Formaldehyde and Acetaldehyde Determination in Air Using Fully Automated On-Line Desorption and Analysis of DNPH Cartridges

    Airborne aldehydes and ketones are collected by passing air through a cartridge containing 2,4-dinitrophenylhydrazine (DNPH). Carbonyl compounds react with the DNPH to form hydrazones, which are immobilized on the cartridge. These compounds can be easily eluted from the cartridge with acetonitrile and analyzed by HPLC with UV detection. Traditionally, this analysis including the workup contains a series of manual steps, which can become time-consuming and could incur experimental error. Automating the extraction of LpDNPH S10 cartridges and putting it in-line with the HPLC analysis will significantly reduce manual labor using this technique and this will improve reproducibility of the method by reducing potential experimental errors by the operator. The automation and unattended operation of the method leads to high throughput for determining airborne formaldehyde and acetaldehyde.

    By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY.

  • Premium

    Odor control for refining/petroleum

    You refine the fuel, we’ll remove the odors. Oil refineries and petrochemical plants may generate large volumes of odor from the processing and refining of different fuels. Sulfides, mercaptans, and hydrocarbon compounds are all closely related to the oil industry. The odors generated from these industrial compounds are of a high nuisance value and generally create concern among local air boards and the public. Ecosorb odor removal products may be used in a variety of areas around the refinery including water treatment facilities, sludge ponds, sulfur recovery units, and API separators. To remove odors during tank cleaning and maintenance operations, portable dispersion systems can be used in the immediate work area to control malodors. Ecosorb products can be directly injected into flues and stacks and may be used as a substitute scrubbing solution in some applications.

    By OMI Industries (OMI) Distributor in Vienna, AUSTRIA.

  • Premium

    Hazardous waste treatment solutions for metal industry

    Sludge by-products from the metalworking industry have a high potential for recycling. Prolonged grinding processes can generate large amounts of highly valuable, alloy-rich sludge; consisting of metal powder and cooling lubricants. Inside our VacuDry system, the thermal separation of the liquids (hydrocarbons, eventually water) and solids (metal powder) takes place in an oxygen free atmosphere. This absence of oxygen ultimately eliminates material degradation by oxidation, and self-ignition or explosion risks. Operation under a low vacuum ensures the possibility to recover the cooling lubricants for later reuse. After the thermal treatment, for appropriate handling in the melting process, the metal powder is pressed into briquettes. With the econ VacuDry technology, 100% recycling of all ingredients is possible.

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Hazardous waste treatment solutions for site remediation

    The contamination of soils as a result of prior chemical production can often be unpredictable and diverse. The majority of such pollutants will require an ex-situ treatment method. Many of our VacuDry units can be used for direct-feeding contaminated soils. To reduce the input amount for thermal treatment, the VacuDry units can also be used in combination with soil-washing plants: In this case, customers only feed the high polluted fractions and screened fines (e.g. below 10 mm), as well as the filter-cake from the soil washing process. However, we are able to handle soil contaminated with mercury, hydrocarbons, PAH, PCB, dioxins, furans, organic-lead compounds and many more. VacuDry plants for on-site ex-situ remediation projects are delivered in a modular design.

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Hazardous waste treatment solutions for oil and gas industry

    There are a wide amount of applications for our VacuDry® process within the oil and gas industry. A large variety of wastes and by-products that are generated in the oil & gas production chain can be treated effectively and sustainably. In past decades, numerous thermal desorption processes have been implemented worldwide, using a variety of heating chamber designs to separate hydrocarbons from the mineral solids. Such standard TDUs work under atmospheric pressure which can lead to safety risks, high energy consumption, larger emissions and limited flexibility regarding altering feed materials. Due to its unique design, the complications outlined above are avoided throughout the VacuDry® process. When it comes to treating standard oily wastes, mercury-containing waste streams, NORM, and especially for the recovery of highly valuable drilling fluids from drill cuttings; our vacuum thermal desorption process (i.e. vacuum distillation) is economically unbeatable.

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    NORM Waste Plants for Oil and Gas Industry

    Natural Occurring Radioactive Material consists of materials enriched with radioactive elements found in the environment. They are usually brought to the surface by oil and gas exploration or mining. NORM wastes can be treated in a VacuDry® unit in order to prepare it for a safe sub earth disposal. Find more information, important key facts and the benefits of VacuDry® NORM waste plants on http://www.econindustries.com/applications/norm-waste

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Reverse Osmosis Water Testing

    Osmosis is the phenomenon of lower dissolved solids in water passing through a semi-permeable membrane into higher dissolved solids water until a near equilibrium is reached. Reverse Osmosis (RO) is a membrane process of purification which removes most of the the total dissolved solids (TDS) in water by reversing the natural process of osmosis. Pressure is applied to a TDS-concentrated solution against a semi-permeable membrane, causing pure water to diffuse through the membrane. RO has become an important process for a wide variety of applications including: medical, laboratory, desalination, industrial wastewater, Deionized (Dl) pretreatment, and drinking water.

    By Myron L Company Distributor in HUNGARY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you