Water & Wastewater Applications in Oman

  • Premium

    Precipitation measurement

    From simple manual rainfall collection devices, electronic tipping bucket rain gauge sensors, through to fully autonomic stand alone data logging systems with telemetry for hydrological network applications.

    By Casella Distributor in Muscat, OMAN.

  • Premium

    Bromate analysis for the drinking water industry

    Bromate forms during the ozonization of drinking water. Several international standards stipulate detection limits and test methods. Conductivity detection with chemical suppression allows the determination of bromate in the lower μg/L range. In the ng/L range, bromate can be detected by IC/MS coupling or post-column derivatization with potassium iodide and subsequent UV detection.

    By Metrohm AG Distributor in Seeb, OMAN.

  • Premium

    Water analysis for municipal wastewater treatment

    Voltammetric determination of many heavy metals is also possible in municipal or industrial wastewater. On account of the usually high organic load the sample is usually mineralized by means of UV digestion. 

    By Metrohm AG Distributor in Seeb, OMAN.

  • Premium

    ph determination for soil testing

    Determination of the pH value provides information about the acid or base action of the soil solution. This in turn is enormously important for the nutrient supply and microbial activity of the soil. For example, many metals (trace elements) are considerably more mobile in acidic soils. If the soil pH values are very low, toxic levels can soon be reached and these can damage the roots of plants. On the other hand, excessively high pH values quickly lead to a shortage of trace elements because of immobilization.

    By Metrohm AG Distributor in Seeb, OMAN.

  • Premium

    Laboratory instruments solutions for chemical industry

    Converting raw materials into more than 70 000 different products that are used in almost all industries, the chemical industry lies at the core of the global economy and, perhaps, modern civilization. There is hardly any industrially produced good that would exist without the chemical industry, all the more considering that it was not until the 19th century that chemistry, particularly organic chemistry, exploded with Wöhler’s urea synthesis. Within just a few decades, numerous important industrial processes were developed that still shape today’s chemical processes – from the chlor-alkali to the Solvay process, to name just a few. The production of high-tech, high-purity chemicals requires safe and reliable analytical solutions. Find out what we have to offer in this area.

    By Metrohm AG Distributor in Seeb, OMAN.

  • Premium

    Laboratory instruments solutions for environmental industry

    The environmental challenges require internationally accepted standards, in which limits and test methods are defined. Metrohm instruments and applications comply with a lot of international environmental standards. Substances introduced into the environment are distributed among the environmental compartments water, soil (sediment), and air, as well as among the organisms living in them (biosphere). Only if we know the type and quantity of these contaminants can we protect the environment and its inhabitants.

    By Metrohm AG Distributor in Seeb, OMAN.

  • Premium

    Laboratory instruments solutions for polymer and plastics industry

    Synthetic polymers and plastics are a mainstay of modern life. Because of their versatility and physical properties, plastics and polymers have conquered nearly every aspect of human activity: airplanes and cars, packaging of all kinds, medical devices and products, electronics, and countless more – without high-quality and high-tech plastics most products we use today in everyday life would look very different. Polymer production is a demanding process in which high-purity raw materials undergo complex reactions and are turned into polymers, resins, rubbers, and gums. To make sure that the products meet the specifications, the materials and processes have to be monitored along the entire production chain. This makes the use of specific and highly accurate analytical techniques indispensable. We at Metrohm are committed to providing the instrumentation and know-how you need to solve your analytical challenges in polymer analysis.

    By Metrohm AG Distributor in Seeb, OMAN.

  • Premium

    Emissions Monitoring for Chemical Plants

    The Opsis gas monitoring system is designed for monitoring in stacks and gas ducts in chemical industries, both in order to increase plant efficiency and to monitor emissions. The Opsis systems have been internationally approved by e.g. the German TÜV and the U.S. EPA.

    By Opsis AB Distributor in Muscat, OMAN.

  • Premium

    Continuous emissions monitoring for palm oil plants

    Make more out of your mill. OPSIS tested and approved monitoring systems provide cost-effective and reliable on-line monitoring of several gas compounds, such as both high and low concentrations of methane, moisture, carbon dioxide and hydrogen sulphide, at several locations.

    By Opsis AB Distributor in Muscat, OMAN.

  • Premium

    Continuous emissions monitoring for cement industry

    Process control and emissions monitoring in cement plants, can be a challenge due to the dusty and corrosive environment. OPSIS provides an accurate system that will operate with high performance and a minimum of maintenance.

    By Opsis AB Distributor in Muscat, OMAN.

  • Premium

    Process monitoring solutions for O2 oxygen monitoring

    OPSIS EEx Zone 1 and 2 certified monitoring equipment meets the demands for monitoring in harsh areas with a high amount of corrosive gaseous compounds. OPSIS offers two monitoring solutions, TDL (Tuneable Laser Diode) technology with ER060L-EEx emitter and receiver set, for harsh installations, and OPSIS O2000 oxygen monitor. The most suitable technique is used for the application at hand.

    By Opsis AB Distributor in Muscat, OMAN.

  • Premium

    Marine monitoring solutions for the SO2/CO2/NOx monitoring

    Process control of a SO2 scrubber on a ship is a challenge due to wet and corrosive gases. In such environment, extractive gas sampling systems require high levels of maintenance in order to operate correctly. OPSIS monitoring system solves this by using an optical, non-contact, cross-duct technique. A light beam is sent across the duct or stack to be measured, and the captured light is sent through an optical fibre cable to an analyser. The analyser measures SO2, CO2 and NOx concentrations using UV and IR absorption, approved reference methods.

    By Opsis AB Distributor in Muscat, OMAN.

  • Premium

    Emissions Monitoring for Mineral Wool Production

    Opsis cross-stack monitoring systems are successfully used for emissions monitoring in mineral wool plants.

    By Opsis AB Distributor in Muscat, OMAN.

  • Premium

    Continuous emissions monitoring for chemical industry

    Process control and emissions monitoring in a chemical plant is a challenge due to corrosive gases, high dust load, and high temperatures. To use an extractive system in this environment will demand a lot of maintenance.

    By Opsis AB Distributor in Muscat, OMAN.

  • Premium

    Ambient air quality monitoring solutions for remote sensing of ship emissions

    New regulation forces ships to lower the emissions of SO2. Ships travelling in SECA areas has to either run on low sulphur fuel, or install SO2 scrubbers. To measure the SO2 emissions from a ship is not an easy task. OPSIS provides the Port Authorities with a unique measurement principle where the emissions from the ship is measured remotely. Light is passing the emissions and by analyzing the light, concentrations of SO2 can be measured.

    By Opsis AB Distributor in Muscat, OMAN.

  • Premium

    Marine monitoring solutions for the O2 oxygen monitoring

    OPSIS provides various monitoring solutions for marine vessels. One application is to monitor in Inert Gas Generators (IGG) onboard ships to control the quality of the nitrogen. The reliable systems supply accurate values continuously, and presents it directly to the control system.

    By Opsis AB Distributor in Muscat, OMAN.

  • Premium

    Low concentrations monitoring of benzene and aromatic hydrocarbons (BTEX) for pollution control and environmental monitoring

    With over 15 years of experience in the measurement of volatile organic compounds (VOC), Environment SA announces the VOC72M, a new generation analyzer for the measurement of BTEX compounds by gas chromatography with photo-ionization detector (PID). The VOC72M can handle up to 40 compounds and eight configurations for analysis. This compact and fully automated analyzer with wide voltage range specifications (90-240V) provides equivalent performance to the laboratory chromatographs and is particularly suited to fixe or mobile ambient air quality monitoring laboratories. The VOC72M is fitted with a PID detector new generation, much more sensitive, more stable and whose lamp does not need to be cleaned; the analyzer integrates flow control fittings a 3 levels security system built on and uses only one gas (nitrogen). This robust and low maintenance instrument performs all the functions (sampling, analysis and data management) in a simple and completely autonomous mode. It is a particular

    By Environnement S.A Distributor in Muscat, OMAN.

  • Absolute separation for the environment sector

    VITONE ECO decanters, together with all auxiliary machinery such as polypreparers, removal dewatered sludge screws, pumps, etcetera, are meant for the following uses: dehydration and thickening of sewage from civil and industrial purification plants; dehydration of vegetable biomasses and zootechnical sludge; waste water treatment for distilleries and fellmongering waste.

    By Vitone Eco S.r.l. Distributor in Ruwi, OMAN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you