Water & Wastewater Applications in Ohio
-
Premium
Water and Wastewater Applications for Scraper Strainers Line
Summary of areas where an Acme scraper strainer can be installed in industrial marketplace and automatic strainer application. The market niche for ACME scraper-strainers and application for strainers is for screen openings larger than .003 inches or 75 microns and goes up to a high end of 6 inch or 150mm particles. At the finer straining end of the ACME line, there is an overlap with the upper end of backwash-type strainers of various designs. As particle sizes grow larger, backwash units fail to compete because ...
By Acme Engineering Prod. Ltd. Distributor in Canfield, OHIO (USA).
-
Premium
Cleaning process for water intake
By Acme Engineering Prod. Ltd. Distributor in Canfield, OHIO (USA).
-
Premium
Hand-Held & Process Control Water Testing Instrument for Fountain Solutions
Accurate fountain (dampening) solution concentration control is essential for consistent, high-quality results in lithography. Low concentration can cause drying on the non-image area of the plate resulting in tinting, scumming, blanket piling, etc. High concentrations, on the other hand, bring about over-emulsification of the ink. This results in weakening of color strength and changes in ink rheology (body and flow properties). Correct concentration will allow the non-image areas of the plate to be appropriately ...
By Myron L Company Distributor in , OHIO (USA).
-
Premium
Determination of boron in water by fluorimetric method
Introduction The method is designed to measure mass concentration of boron in samples of natural, drinking, and waste water by fluorimetric method using the FLUORAT-02 ...
By Lumex Instruments Distributor in Twinsburg, OHIO (USA).
-
Premium
Determination of aluminium in water by fluorimetric method
Aluminium is the most abundant metallic element and its salts are widely used as a coagulation treatment agent. At the same time increased levels of aluminium may lead to renal diseases and cause undesirable color and turbidity of distributed water. There are practicable levels of aluminium in water based on optimization of the coagulation process at drinking-water plants: 0.1 mg/L or less for large water-treatment facilities and 0.2 mg/L or less for small. Lumex Instruments provides accurate and selective ...
By Lumex Instruments Distributor in Twinsburg, OHIO (USA).
-
Premium
Determination of total petroleum hydrocarbons (TPH) in water by fluorimetric method
Total petroleum hydrocarbons (TPH) is a term used to describe a large family of several hundred chemical compounds that originally come from crude oil; the main and most specific part of these compounds are non-polar and slightly polar hydrocarbons of the aliphatic, aromatic and alicyclic structure. These compounds are harmful to humans and animals if absorbed through the skin, ingested, and inhaled thus claiming the analytical control of THP content in water as a global issue. Quantification of TPH in water is ...
By Lumex Instruments Distributor in Twinsburg, OHIO (USA).
-
Premium
Water Testing for Automatic Rinse Tank Controls
Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ignored. Today, this is no longer true. Tap water costs have increased dramatically. Various new regulations are now in effect which limit the allowable volume of wastewater. Others require wastewater treatment. Still other laws tax the amount of water going down the sewer. These factors have ...
By Myron L Company Distributor in , OHIO (USA).
-
Premium
Rapid analysis of total mercury in waste waters and process waters with elevated mercury content using direct pyrolysis technique
Introduction A conventional standard method of total mercury det ermination in water using atomic absorption spectrometry (AAS) involves preliminary sample digestion that ta kes from 30 minutes to 8 hours depending on the digestion conditions. The use of a mercury analyzer RA-915M/RA-915+ with Zeeman background correction in combination with PYRO-915+ pyrolysis attachment provides direct dete rmination of mercury in process and waste waters contaminated with mercury without digesti on or any other sample ...
By Lumex Instruments Distributor in Twinsburg, OHIO (USA).
-
Premium
Determination of nitrites in water by fluorimetric method
Lumex Instruments provides sensitive and selective fluorimetric method for the measurement of mass concentration of nitrites in water samples using the FLUORAT-02 ...
By Lumex Instruments Distributor in Twinsburg, OHIO (USA).
-
Premium
Corrosion-resistant materials for the wastewater industry
The highly corrosive environments found in the municipal & industrial wastewater market make it a core industry for Sauereisen and our corrosion-resistant materials. We have decades of experience in delivering quality products and services that provide dependable solutions for these aggressive environments while helping to preserve municipal and industrial assets. Whether it's restoration or new construction, Sauereisen addresses the environmental and economic challenges posed by water inflow and infiltration ...
By Sauereisen Inc. Distributor in Painesville, OHIO (USA).
-
Premium
Determination of fluorescein in natural and oilfield water by fluorimetric method
Introduction The indicator (tracer) method is used in hydrology for following, or tracing, the water flows for understanding the processes in hydrological systems. Oil companies often use the indicator (tracer) method for monitoring the exploitation of oil pools. Indicator (tracer) method gives essential information on the geological structure of the oilfield and the filtration flows in the ...
By Lumex Instruments Distributor in Twinsburg, OHIO (USA).
-
Premium
Determination of zinc in water by fluorimetric method
In accordance with WHO’s Guidelines for Drinking Water Quality there is no health-based guideline value of zinc in water concentration. Concentration of zinc in tap water can increase as a result of its dissolution from pipes. Also, elevated levels of zinc may be an indicator of increased concentrations of other toxic metals; thereby zinc in water analysis is an essential analytical task. Lumex Instruments provides sensitive and selective fluorimetric method for the measurement of mass concentration of zinc ...
By Lumex Instruments Distributor in Twinsburg, OHIO (USA).
-
Premium
Determination of the chemical oxygen demand (COD) in water
Introduction Chemical Oxygen Demand (COD) is one of the most common integral indicators of anthropogenic pollution of water bodies. COD is widely used in the analysis of natural water, to control wastewater treatment from organic various substances. ...
By Lumex Instruments Distributor in Twinsburg, OHIO (USA).
-
Premium
Hand-Held & Process Control Water Testing Instrument for Environmental Industry
Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation's waterways. Today, in many ...
By Myron L Company Distributor in , OHIO (USA).
-
Solids removal for sewage wastewater treatment
Solids removal for sewage wastewater ...
By Process Wastewater Technologies LLC Distributor in Brecksville, OHIO (USA).
-
Oil water separation for the steel industry
By Oil Skimmers, Inc. based in Cleveland, OHIO (USA).
-
Sludge reduction for industrial wastewater treatment
The wide range of Pieralisi decanters is in fact successfully used by over 15,000 customers around the world for the volume reduction of biological and physical/chemical sludge of both Municipal and Industrial ...
By Pieralisi Group Office in West Chester Twp, OHIO (USA).
-
Membrane Equipment and Process-development Services for Industrial Effluent Industry
Crossflow membrane technology is widely used throughout the process industries to provide a cost-effective solution for reducing wastewater volumes. In many cases, the technology can achieve a reduction in the volume of wastewater by a factor of five to ten times, offering potential savings on effluent charges as well as producing a clean water stream that can often be reused as wash water or cooling water within a facility. In some cases the concentrated wastewater can be reused in the production process giving a ...
By Membrane Specialists LLC based in Hamilton, OHIO (USA).
-
Dewatering applications for screw presses in pulp and paper mills
Stock Thickening: Between Primary and Secondary Refining Stage. Between Secondary and Tertiary Refining Stage. In Front on High-Density Stock Chest. In Front of Dispersion Systems in Recycle Mills. Pulp Washing for Pine Tar and Chemical ...
By Press Technology & Mfg., Inc. based in Springfield, OHIO (USA).
-
Combined sewage overflow control for wastewater treatment
Combined sewage overflow control for wastewater ...
By Process Wastewater Technologies LLC Distributor in Brecksville, OHIO (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you