Only show results in Virginia? Ok

Water & Wastewater Applications

  • Premium

    Odor control for refining/petroleum

    You refine the fuel, we’ll remove the odors. Oil refineries and petrochemical plants may generate large volumes of odor from the processing and refining of different fuels. Sulfides, mercaptans, and hydrocarbon compounds are all closely related to the oil industry. The odors generated from these industrial compounds are of a high nuisance value and generally create concern among local air boards and the public. Ecosorb odor removal products may be used in a variety of areas around the refinery including water treatment facilities, sludge ponds, sulfur recovery units, and API separators. To remove odors during tank cleaning and maintenance operations, portable dispersion systems can be used in the immediate work area to control malodors. Ecosorb products can be directly injected into flues and stacks and may be used as a substitute scrubbing solution in some applications.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    algae control in drinking water plants

    By controlling algae, cyanobacteria and fouling LG Sonic can efficiently reduce taste and odor problems in a treatment plant. The performance of a drinking water treatment plant is consistent with the amount ol contamination in the water. Growth of algae and other fouling in and before a treatment plant can cause various problems within the process. In general, these issues are related with taste or odor of the water. Growth of algae, cyanobacteria and bacteria within the basins of the plant itself, increase the demand of chemicals or filtration and in turn creating problems with THM (trihalomethane) formation. Other common issues are growth of toxin and geosmin producing cyanobacteria (blue-green algae) within the intake reservoir or dam. These molecules give the water an unpleasant `earthy ` taste.

    By LG Sonic based in Zoetermeer, NETHERLANDS.

  • Premium

    Hazardous waste treatment solutions for site remediation

    The contamination of soils as a result of prior chemical production can often be unpredictable and diverse. The majority of such pollutants will require an ex-situ treatment method. Many of our VacuDry units can be used for direct-feeding contaminated soils. To reduce the input amount for thermal treatment, the VacuDry units can also be used in combination with soil-washing plants: In this case, customers only feed the high polluted fractions and screened fines (e.g. below 10 mm), as well as the filter-cake from the soil washing process. However, we are able to handle soil contaminated with mercury, hydrocarbons, PAH, PCB, dioxins, furans, organic-lead compounds and many more. VacuDry plants for on-site ex-situ remediation projects are delivered in a modular design.

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    Eliminating the Environmental foot print for Offshore and On shore oil rigs

    OSE II ELIMINATING THE ENVIRONMENTAL FOOT PRINT WHILE REDUCING COSTS ASSOCIATED WITH DRILLING MUD, DRILLING MUD CLEAN UP, RIG WASHING, RIG OPERATIONS AND EMERGENCY OIL SPILL RESPONSE FROM OIL RIGS

    By OSEI - Oil Spill Eater International, Corp based in Dallas, TEXAS (USA).

  • Premium

    Reverse Osmosis Water Testing

    Osmosis is the phenomenon of lower dissolved solids in water passing through a semi-permeable membrane into higher dissolved solids water until a near equilibrium is reached. Reverse Osmosis (RO) is a membrane process of purification which removes most of the the total dissolved solids (TDS) in water by reversing the natural process of osmosis. Pressure is applied to a TDS-concentrated solution against a semi-permeable membrane, causing pure water to diffuse through the membrane. RO has become an important process for a wide variety of applications including: medical, laboratory, desalination, industrial wastewater, Deionized (Dl) pretreatment, and drinking water.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Coating and Laminating

    MEGTEC’s experience and application know-how are at your command for tough drying and web handling applications such as slow-drying coatings and materials or thin film coating and laminating. Dryers can be equipped with a wide variety of nozzle configurations ranging from simple slot nozzles to sophisticated Coanda-style air bars and patented air foil systems. A full range of heat sources are available including steam, direct and indirect gas-fired, thermal oil, electric, hot water and IR. In addition, the air handling systems can be integrated into the dryer enclosure or stand-alone for remote installation. When the process requires pollution control systems for solvent-based applications, MEGTEC also offers regenerative thermal oxidizers, solvent recovery, distillation and purification systems. MEGTEC also offers waste heat recovery packages to “close the energy loop” between pollution controls and the process, in order to reduce production costs and increase customer profits

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Wastewater Treatment

    Many industrial and pharmaceutical processes generate wastewater with volatile contaminants that increase the COD and BOD to a point where discharging to municipal wastewater is very costly or not an option. These contaminants can be removed from the water by distillation, substantially lowering the disposal cost, and, in many cases, the removed components can be further purified and reused in the process. MEGTEC offers the following solutions to remove the volatile contaminants and make wastewater suitable for discharge to most municipal wastewater treatment plants: Stripping columns using direct steam or a reboiler Distillation columns using indirect steam heat sources Our technologies have been applied to a range of processes including wastewater treatment from industries such as Pharmaceutical, Semiconductor, Chemical and Petrochemical.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Algae Control (Waste)Water treatment plants

    The LG Sonic technology controls suspended and filamentous algae without killing beneficial bacteria in (Waste)Water treatment plants.

    By LG Sonic based in Zoetermeer, NETHERLANDS.

  • Premium

    Waste to Energy

    We can treat the air streams from waste management plants, MBT (Mechanical Biological Treatment) reception and composting areas, Waste Water Treatment Plants (WWTP), Refuse Derived Fuel (RDF) Plants, gasification of waste, syngas, torrefaction, gas engines and biogas upgrading. In waste management plants and WWTP, we remove the odors that may be causing a nuisance to neighbors, with bioreactors using Biomass to degrade odorous components and where odors are particularly intractable or VOC emissions higher, thermal oxidizers to meet prescribed emission limits and odor levels. In RDF Plants, Syngas, Gasification, Gas Engine and Biogas Upgrading applications, we employ thermal oxidizers, particulate removal and DeNOX systems, for the control of VOC, NOx, CO and particulates to prescribed emission limits.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Algae control in lakes

    “If you need a method to control algae in lakes or on other large water surfaces without chemicals the LG Sonic technology is your solution. 1 LG Sonic device controls algae in a range of 200 meters, nearly maintenance free and on without causing any harm to the ecosystem present”

    By LG Sonic based in Zoetermeer, NETHERLANDS.

  • Premium

    Water treatment solutiions for power industry

    Fluence has decades of experience providing sustainable treatment solutions for power industry process water and effluent. Industrialization and population growth are spurring the demand for power around the world, putting pressure on fuel and water resources. At the same time, power producers face strict pollution and air-quality controls.

    By Fluence Corporation based in White Plains, NEW YORK (USA).

  • Premium

    Metal Sludge Plants for Oil and Metal Industry

    Grinding-swarf from the metal processing industry may contain metal alloys, stainless-steel and high-alloyed steel, all of which are ideal input-materials VacuDry unit. The absence of oxygen in the VacuDry process prevents any changes in the chemical structure of the oil, emulsions or metals during the treatment. The output material can later be sold at high prices.

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    Algae control in raw water reservoirs

    Algae control in raw water reservoirs increases the water quality and lowers chemical consumption. Treating algae in drinking water with ultrasound reduces taste and odor problems without harming the ecosystem.

    By LG Sonic based in Zoetermeer, NETHERLANDS.

  • Premium

    Chemical resistant dosing pumps for pharmaceuticals & laboratory industry

    Verderflex tube pumps provide precision pumping and dispensing solutions for the pharmaceutical industry. The pumps range from being manually operated to versatile units with sophisticated dosing programs. Capable of speed, accuracy and the easy to use pump range are perfect for dispensing delicate, viscous, corrosive, shear sensitive or abrasive fluids..

    By Verderflex Peristaltic Pumps - part of the Verder Group based in Castleford, UNITED KINGDOM.

  • Premium

    Laboratory Analytical - Moisture Content Determinations

    The moisture content influences the physical properties of a substance such as weight, density, viscosity, refractive index, electrical conductivity and many more. Chemical, thermogravimetric or loss on drying techniques are used to determine this content.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Laboratory Analytical - Titration Applications

    The application chemists of the METTLER TOLEDO Analytical Chemistry market support group have prepared more than 500 of ready-made titration applications for use with the wide range of METTLER TOLEDO titrators. These proven and well-tested applications will help you to get accurate results quickly. Our online search engine allows you to search through the database.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Laboratory Weighing - Routine Test of Balances and Scales

    Measuring equipment must be checked regularly, if the quality of the measurement results has changed during every-day use. The user should perform these checks at fixed time intervals. Balances and Scales are tested with an external weight piece. This test weight must have a valid calibration certificate issued by an accredited calibration lab. The tests should be performed in fixed, regular intervals and the results should be documented in a traceable way.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Laboratory Weighing - Differential Weighing

    Perfecting a classical method. Determining the difference between the initial and residual weights of samples in percent and grams is one of the most frequent routine applications in a laboratory. METTLER TOLEDO offers a complete solution in this area. It consists of a balance, a printer, and application software for the specific balance being used. There is a choice between an integrated balance application, or an optional software cassette which simply plugs into the balance.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Laboratory Weighing - Density Measurement

    Density determination using the buoyancy method. Density determination is used in many areas to characterize certain properties of a product or material. Density determination applications are not only numerous, but also frequently associated with very specific requirements. METTLER TOLEDO offers a range of hardware and software options for determination of density using the gravimetric measuring method.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    AutoChem - Crystallization

    Understand, Optimize and Control Crystallization From Laboratory to Manufacturing Plant. It is challenging to design a crystallization process that will scale-up to reliably manufacture a consistent product meeting yield, purity and crystal size distribution specifications, and at the same time ensure efficient downstream processing in filtration, drying and product formulation processes.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you