BioSolve Pinkwater is used for cleaning/decontaminating tools and equipment at remediation sites, in refineries, on drilling rigs, following spill cleanup, and in industrial maintenance operations. Generally applied with standard pressure washing equipment. Most oil and tar build-up can be washed away on contact. For more severe contamination, use of a hot water system may yield better results.
Hospitals and other types of Health Care institutions produces growing constant volumes of defined “redlisted” Hazardous Waste. Of the total Hospital Waste volumes generally growing shares (40-60%) of the total waste are contaminated and should be sterilized. Therefore the Health Care Sector needs to increase the waste process decontamination capacities. If you are running all waste through the Ozonator you can solve all these problems combined with up to 90 % volume reduction.
The treatment of raw water depends on its quality, which depends on its origin and can vary over time. The water to be treated must be continually analyzed. fluidion products can be used to perform sampling and measurement operations for testing water quality, both upstream and downstream of water treatment plants. Positioned upstream of a facility, they can monitor the contamination present in the water entering the plant such that the proper treatment can be adapted accordingly. Positioned downstream, they can...
The unique properties of hydrogen peroxide (H2O2) make it a good technology for keeping cooling loops, process water loops and heat exchangers clean from fouling that can occur due to various contaminants in the water. Hydrogen peroxide works well in removing organic fouling on surfaces through mechanical means and in specific applications through biocidal mechanisms.
Hydrogen peroxide can be used in a shock treatment mode where it is fed based on a timer set-up. It can also be used occasionally at higher...
Since the early 1990s wineries have been experimenting with ozone as an alternative to sanitizers like chlorines and sulfur dioxide. This has provided added benefit of reducing water usage, power consumption, and chemical treatment.
At many commercial facilities, the time and resources devoted to the operations of a water treatment system are often limited. ChemTreat understands the diverse and unique needs of this sector and provides solutions for the challenges faced within the industry.
The automotive industry is a major consumer of water. According to some estimates, producing a car uses an astonishing 40,000 gallons of water. Water is used in nearly every stage of the auto manufacturing process and water treatment for the automotive industry must be reliable and sustainable. Metal finishing, boiler feed, cooling tower makeup and the paint shop all require large volumes of water. Top performing auto manufacturers now set water efficiency goals as low as 1 m3 per unit. In order to reach these...
based in Newton, MASSACHUSETTS (USA).
Biomaterials are those which interact with the native-tissue, organ or function in a body. Biomaterials have recently attracted a lot of attention due to the potential applications in replacing major components and systems in a living organism. Biomaterials have been widely used in dental, cardiovascular, cosmetic and orthopedic applications. XPS has been particularly useful in exploring the limits and possibilities of such novel devices and interfaces.