Arsenic Contamination Applications in Europe
-
Premium
Determination of heavy metals in food
This analytical procedure is intended for measuring the content of the elements (cadmium, lead, arsenic, tin, chromium and mercury) in the samples of food products by atomic absorption spectrometry with electrothermal atomization using an “MGA-915M” Graphite Furnace AA Spectrometer. The method is based on measuring resonance radiation absorption that occurs when the radiation passes through a layer of atomic vapor in the electrically heated graphite furnace of the “MGA-915M” AA ...
By Lumex Instruments Distributor in , UNITED KINGDOM.
-
Premium
Determination of Toxic Trace Elements
Analytical solutions for toxic elements for better risk assesment. Over the last centuries a considerable increase of toxic elements such as arsenic, cadmium, lead and mercury in the environment has been observed. Human activities and industrialization in particular have contributed to significant release of these naturally occurring elements, hence leading to an accumulation in the food chain. These elements can have adverse effects on organisms and lead to severe illnesses, organ malfunction and even death. ...
By Analytik Jena - an EndressHauser Company Office in London, UNITED KINGDOM.
-
In-situ reduction technology for groundwater remediation industry
Nanoremediation represents a modern method of treatment of environment polluted by chlorinated hydrocarbons, heavy metals, radionuclides and other contaminants. This technology started to be used tentatively in USA and it already takes place on various sites around the world at ...
By Nano Iron s.r.o. based in Židlochovice, CZECH REPUBLIC.
-
Environmental monitoring solution for glass manufacturing areas
Heavy metals, particulates, SO2 & NOx are the main emissions from the glass manufacturing industry and their measurement requires careful selection of instrumentation. Ecotech offers a complete monitoring solution tailored to this ...
By Acoem Australasia Distributor in Stroud, UNITED KINGDOM.
-
Sludge - slurry dewatering solutions & filter press technology
DIEMME Filtration has the correct solutions for all problems of slurry - sludge dewatering, because every DIEMME FILTRATION filter press, is projected in connection with the chemical physical characteristics of the ...
By Aqseptence Group GmbH Office in Domloup, FRANCE.
-
The health risks of iron, manganese, arsenic in drinking water
Electrolysis technology for iron, manganese, arsenic. Iron, Manganese, and Arsenic are well-known health risks in drinking waters. The high oxidizing potential of HypoX® enables very efficient Iron, Manganese and Arsenic removal in treatment ...
By Kemisan based in Güzelbahçe/İzmir, TURKEY.
-
EDXRF spectrometers for cosmetics industry
During the manufacturing process, cosmetic products need to be chemically analyzed to ensure conforming to product specification and safety regulations, as well as achieving cost-effectiveness in the manufacturing process. Using ED-XRF allows measuring a wide range of elemental concentrations such as C(6)-Fm(100), without a need for sample preparations(heating or destroying the sample). Samples can be measured in the form of loose powders or powders pressed into pellets, and are made ready for measuring within ...
By Xenemetrix Ltd. Distributor in Çankaya, TURKEY.
-
Activated carbons for water purification - POU/POE industry
The POU/POE industry has strict performance standards. Filter units are tested and approved by ANSI recognized entities such as NSF, UL, and WQA. Most units are now tested to meet California Prop 65 standards for arsenic, antimony, and aluminum. Puragen Activated Carbons is a leader in this market offering high-quality coconut shell activated carbon products in standard, water-washed, and acid-washed options as well as enhanced catalytic carbon ...
By Puragen Activated Carbons Office in Paris, FRANCE.
-
Ceramic Flat Sheet Membrane for Drinking Water Treatment
Today ceramic MF/UF membrane filtration for treatment of drinking water is becoming more and more accepted as a viable treatment method. This trends is mainly driven by an increasing demand for a more effective removal of especially challenging feed water ...
By Cembrane based in Lynge, DENMARK.
-
Electrochemical solutions and water technologies for municipal water & wastewater
With more than 50 years’ experience across a range of applications and technologies, De Nora Water Technologies delivers reliable, effective and easy to maintain disinfection and filtration solutions. Our renowned brands, such as TETRA, Capital Controls, ADVANCE, ClorTec, UAT, EST and UltraDynamics, combined with our comprehensive aftersales offering, ensure that our customers are set to meet their legal treatment requirements, all while minimising their operating costs. Our solutions for municipal water and ...
By Industrie De Nora S.p.A. | De Nora Water Technologies Office in Tamworth, UNITED KINGDOM.
-
EDXRF spectrometers for wood treatment industry
Wood treatment used to protect lumber from fungi, insects, UV damage, water damage and general wear. When treating wood the proper balance of treatment solution must be monitored to ensure the highest quality while minimizing waste and excess cost due to treatment usage or product ...
By Xenemetrix Ltd. Distributor in Çankaya, TURKEY.
-
Membrane Water Treatment and Monitoring Products for Drinking Water
Modern Water offers technologies that detect pesticides in source water. Drinking water protection and water quality are critical to human health. Utilising rapid screening technologies can provide quick and reliable results for assurance while saving costs over the traditional laboratory ...
By Modern Water Office in Sand Hutton, UNITED KINGDOM.
-
Membrane Water Treatment and Monitoring Products for Food & Beverage
Monitoring in raw water can provide operators with immediate information to facilitate adequate treatment. Trace (heavy) metals can naturally occur in surface and ground waters or may arise from industrial environmental discharge. ...
By Modern Water Office in Sand Hutton, UNITED KINGDOM.
-
Drinking water and process-water-treatment sector
A global water shortage can only be prevented by intelligent water management, and taking the greatest possible care with our reserves. We are well aware of this ...
By Harbauer GmbH based in Berlin, GERMANY.
-
Evaporators for Mining and Primary Metals Industry
Water is essential component in the mining and steel industries. The main needs under this aspect are optimizing the management of the resources, improving productivity by treating available water for specific production process requirements and managing environmental risks by treating contaminated pond and underground mine water to remove heavy metals, arsenic and other contaminants for safe discharge into sensitive environment. Steel, Copper, Aluminum, Lithium. Wastewater treatment to remove highly polluting ...
By EVALED - Evaporator - Veolia Water Technologies Italia Spa based in Zoppola (PN), ITALY.
-
ION-IX - Multiport Distribution Valve for Arsenic Removal
Arsenic is a common, naturally occurring drinking water contaminant that originates from arsenic-containing rocks and soil and is transported to natural waters through erosion and dissolution. Arsenic occurs in natural waters in both organic and inorganic forms. However, inorganic arsenic is predominant in natural waters and is the most likely form of arsenic to exist at concentrations that cause regularity ...
By PuriTech Bvba based in Herentals, BELGIUM.
-
Zero valent iron nanoparticles for water treatment and purification sector
All described properties of Fe(0) nanoparticles can be even used for decomposition of pollutants contained in the waste water, mainly for treatment of industrial sewage and hutch water. The usage of nanoiron can represent a significant qualitative step in the classical technologies of water treatment including drinking water. The extremely reactive iron nanoparticles thus offer a possibility to solve long-lasting problems with a high content of uranium and arsenic in a variety of localities in the Central Europe. ...
By Nano Iron s.r.o. based in Židlochovice, CZECH REPUBLIC.
-
Water Treatment Solutions for Drinking Water Industry
Water is the most strictly controlled consumer commodity, and for good reason. We set the highest standards for our drinking water. It must be clean, safe and free of contaminants and should have no properties that might pose a risk to health. It should be rich in vital substances and supply our bodies with essential minerals. By the same token, water should not damage our pipe systems, taps, shower heads or any domestic appliances that use ...
By Cillit Water Technology Group Office in Wien, AUSTRIA.
-
Water treatment solutions for groundwater and lake decontamination sector
Groundwater is the ideal drinking water. It has a neutral taste, is clear and contains essential minerals. Rivers and lakes are ecosystems which also have a major role in our water balance. Yet human behaviour and the addition of pollutants bring these systems into imbalance. Where groundwater is polluted and bodies of waters are contaminated, Harbauer provides modular plant technology adapted to the particular situation. We have a wide range of experience in treating large bodies of water, purifying groundwater ...
By Harbauer GmbH based in Berlin, GERMANY.
-
Stack Emission Sampling for Heavy Metal Sampling System
This method is dedicated to the sampling of discharged heavy metals in emissions coming from hazardous city waste incinerators. The elements analyzed are: Antimony, Arsenic, Cadmium, Chromium, Cobalt, Copper,Magnesium,Nickel, Lead, and Thallium. This method is applicable to each one of these specific elements in the concentration range of 0.005 mg/m3 to 0.5 mg/m3. ...
By AMS Analitica based in Pesaro, ITALY.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you