Only show results available in Virginia? Ok

Atmospheric Water Applications

  • Air pollution control for the leachate remediation industry

    Waste water treatment from landfills and other industrial operations – commonly use catalytic oxidizers for air pollution control needs.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • PLAZKAT systems for treatment (removal, neutralisation) of smelly substances from the air

    PLAZKAT Aero units are used to neutralize bad smells from waste treatment facilities, caused by the presence of sulfur and nitrogen compounds - hydrogen sulfide, mercaptans, and ammonia. Urban waste treatment facilities, local waste treatment systems in factories, pumping stations in waste water treatment systems are characterized by a strong smell of sulfur and nitric compounds.

    By Plasma Air Systems Corporation based in Harju Maakond, ESTONIA.

  • Premium

    Wastewater Treatment

    Many industrial and pharmaceutical processes generate wastewater with volatile contaminants that increase the COD and BOD to a point where discharging to municipal wastewater is very costly or not an option. These contaminants can be removed from the water by distillation, substantially lowering the disposal cost, and, in many cases, the removed components can be further purified and reused in the process. MEGTEC offers the following solutions to remove the volatile contaminants and make wastewater suitable for discharge to most municipal wastewater treatment plants: Stripping columns using direct steam or a reboiler Distillation columns using indirect steam heat sources Our technologies have been applied to a range of processes including wastewater treatment from industries such as Pharmaceutical, Semiconductor, Chemical and Petrochemical.

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Smoke generator device for wind tunnel studies

    For producing a point source of smoke in a wind tunnel environment, Concept have the Aerotech smoke system, with a heated tip on the end of a thin wand. For seeding a wind tunnel for LDA/PVA type work the ViCount 1300 system is normally supplied. This can produce either water or oil based smoke with minor re-programming, so it is a very adaptable solution. The ViCount is such a versatile machine, that its capable of everything from seeding the world’s largest wind tunnel (NASA AMES) through to producing fine smoke rakes in educational wind tunnels.

    By Concept Smoke Systems based in Maidenhead, UNITED KINGDOM.

  • Air Quality Monitoring Equipment for Combustion Industry

    Boilers and Combustion Research A fuel source burning with oxygen to produce carbon monoxide, carbon dioxide and water is an equation from school science lessons but looking into the fuel temperature and oxides of nitrogen produced along with the CO, CO2 and O2 is work that is being carried out by boiler makers, power generators and all sorts of industrial applications every day.

    By Signal Group Ltd based in Camberley, UNITED KINGDOM.

  • Atmospheric Water Generators

    WaterMicronWorld, Ltd. is engaged in the research and development, manufacturing, marketing, and worldwide distribution of atmospheric water generators, filtration, ionization, and purification devices and chemicals. The Company’s various products include Atmospheric Water Generators, the WaterMicronWorld™ (AWG-30H/O Home or Office machine) and an extensive line of C-Series industrial grade Atmospheric Water Generators capable of producing 200,250, 500, 1000, 3000, and up to 5000 liters per day of pure fresh drinking water. For more information on WaterMicronWorld, Ltd., please visit our website at: WaterMicronWorld, Ltd utilizes a revolutionary AWG (Atmospheric Water Generation) technology to produce safe and drinkable water. AWG refers to the technology of extracting and producing purified drinking water from the humidity present in the air. To produce pure water, it requires no plumbing or any type of external water source.

  • Water Disinfection for Aircraft

    Drinking Water Treatment and Disinfection for the Transport Industry Even Airbus, the world’s largest aircraft manufacturer implements the REDO technology. Prior to delivering the new aircrafts, all of the drinking water pipelines are disinfected with the REDO Technology. Then the water tanks are filled with disinfected water from a REDO unit. A significant advantage is the enormously reduced service time, in comparison to alternative methods. In addition, one profits from a better work-flow and last but not least, from the guarantee of maximum safety – there are no hazardous potentials with the REDO Technology.

    By REDO Water Systems GmbH based in Groß-Zimmern, GERMANY.

  • Acid Regeneration Process

    Acid Regeneration Process The commercially most relevant field of application for HCl regeneration processes is the recovery of HCl from waste pickle liquors from carbon steel pickling lines. Other applications include the production of metal oxides such as, but not limited, to Al2O3 and MgO as well as rare earth oxides by pyrohydrolysis of aqueous metal chloride or rare earth chloride solutions. A number of different process routes are available. The most widely used is based on pyrohydrolysis and adiabatic absorption of hydrogen chloride in water, a process invented in the 1960s. However tightening environmental standards and stringent air permit policies render it increasingly difficult to establish new pyrohydrolysis based acid regeneration plants.

    By Insheng Engineering Co., Ltd based in Pingtung, TAIWAN.

  • Premium

    Iron and Steel

    SoniCool™ Evaporative Gas Cooling & Conditioning uses a finely atomized water spray to cool EAF, BOF off-gases from over 2,400°F (1,315°C) to as low as 240°F (115°C), protecting ductwork and downstream air pollution control equipment from high temperature and sparks, while providing rapid cooling for dioxin and furan control. By optimizing humidity levels, SoniCool™ helps electrostatic precipitators. The water spray completely evaporates while cooling gases. There is no free water and no troublesome deposits in ducts, towers or hoppers. Turbotak rugged nozzles are made to the exact requirement, and ideally suited to the harsh conditions in the steel manufacturing process while still producing ultra-fine sprays, with precise control of dropsize and spray coverage.

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you