AWWA Standard Equipment
-
Manufactured by GA Industries, LLCbased in USA
enclosed stainless steel air cushion chamber minimizes the noise associated with the valve’s rapid closure. The Figure 350 meets the standardized face-to-face length of AWWA C508-01. It is suitable for water, wastewater and raw sewage in horizontal or vertical ...
-
PremiumManufactured by Jacobi Groupbased in SWEDEN
Activated Carbons designed for water treatment, covering applications such as drinking water, effluent wastewater, industrial process water, beverage processing, and home water filters. Relevant AquaSorb grades comply with NSF, EN, and AWWA standards for drinking water treatment and also meet the requirements of the Food Chemicals Codex. ...
-
PremiumManufactured by CETCObased in USA
physical properties of ANSI/AWWA B-604 standard for ...
-
PremiumManufactured by Proco Products, Inc.based in USA
Proco Series 233L expansion joints are built to withstand even the most rigorous piping system configurations. They are low-profile, triple-arch products which are specifically designed to absorb directional movements of rigid pipe systems, as well as reduce noise and vibration, and compensate for misalignment due to long-term ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco Style 271 rubber expansion joint is a single super-wide flowing arch design. It’s self-cleaning, which eliminates the need for a filled arch design and makes it the perfect choice for slurries. The Style 271 can replace and be interchanged with hand-built narrow/wide arch, molded wide arch, and spherical type expansion ...
-
Manufactured by Rinker Materials – Concrete Pipe Division, a QUIKRETE Companybased in USA
S-200 Welded Steel Pipe is designed and manufactured in accordance with AWWA C200 Standard and with AWWA Manual M11. S-200 is manufactured in sizes 32” through 124” O.D., in joint length up to 50’. Hanson steel pipe is mortar lined (AWWA Standard C205) and is available with Polyurethane ...
-
Manufactured by Clow Valve Company - A Division of McWane, Incorporatedbased in USA
Resilient Wedge Valves from Clow Valve Company bring the latest technology and more than a century of engineering expertise to your water system. They’re designed to meet or exceed AWWA standards and have, for decades, been recognized as the original and definitive ...
-
Manufactured by The Ford Meter Box Company,Inc.based in USA
All Ford fabricated steel products are built to meet the requirements of applicable AWWA standards. Available options include a variety of stainless steel fasters, a variety of gasket material and fusion bonded epoxy ...
-
Manufactured by The Ford Meter Box Company,Inc.based in USA
Ford Corporation Stops are designed and manufactured to conform with AWWA Standards. All Ford Stops are individually inspected and tested for leaks. They are all compatible with tapping machines of current design. Ford Meter Box offers the widest variety of Corporations Stops available to water works ...
-
Manufactured by Terminal City Iron Works Ltdbased in CANADA
Terminal City Iron Works Ltd. manufactures AWWA C153 push-on fittings in sizes 4” to 16” that complement your design criteria. Our ductile iron fittings are produced to ANSI/AWWA standards with protective coatings and linings that meet AWWA C104 and/or C116 specifications. Ask us about joint restraint for these ...
-
based in USA
Carbon Service and Equipment Company's virgin 8x30 mesh is a bituminous coal-based carbon. This product is designed to comply with all the applicable provisions of the AWWA Standard for Granular Activated Carbon, edition B604-96, the stringent extractable requirements of ANSI/NSF Standard 61 and the Food Chemicals ...
-
based in USA
Carbon Service and Equipment Company's virgin 12x40 mesh is a bituminous coal-based carbon. This product is designed to comply with all the applicable provisions of the AWWA Standard for Granular Activated Carbon, edition B604-96, the stringent extractable requirements of ANSI/NSF Standard 61 and the Food Chemicals ...
-
Manufactured by CO-SUNNY TECHNOLOGY CO., LIMITEDbased in CHINA
be calculated to properly support the filter media. Pebble support gravel(F 08 series): Meet AWWA standard Pebble support gravel(F08 series) package: 25, 50, 500 kgs woven ...
-
Manufactured by M&H Valve Companybased in USA
All butterfly valves shall be of the rubber-seated, tight-closing type. They shall meet or exceed AWWA standard C504, latest edition, Class 150. All valves shall be M&H 4500/1450 butterfly valves, or approved ...
-
Manufactured by J&S Valve, Incbased in USA
J&S Valve offers the “Protector 5000” Series DBH-5000 dry barrel fire hydrant manufactured to AWWA C502 Standard. The Protector 5000 is UL Listed/FM approved at 250 psi rated working pressure. J&S stocks the Protector 5000 in bury depths ranging from 3’0” – 6’0”, with Mechanical Bases ...
-
Manufactured by M&H Valve Companybased in USA
All butterfly valves shall be of the rubber-seated, tight-closing type. They shall meet or exceed AWWA standard C504, latest edition, Class 150. All valves shall be M&H 4500/1450 butterfly valves, or approved ...
-
Manufactured by Harco Fittings LLCbased in USA
MJ x SDR-35, Standards: AWWA C111 (ANSI ...
-
Manufactured by NoFire Turkey Co.based in TURKEY
Meets all applicable parts of ANSI/AWWA C502 standard. UL Listed (EX16453) and FM Approved (FM1510) 250 psig working pressure, 400psi testing pressure as per UL-EX 15971. ...
-
Manufactured by Northern Filter Mediabased in USA
Well Pack gravel is used for deep bed in-ground wells to form a barrier between the screens and the natural deposit of the land, which in turn, allows for the well to provide very clean water. Other applications can include dewatering well and monitoring wells. All of our Well Pack products meet or exceed AWWA Standard B100-09 and ...
-
Manufactured by Leemco, Inc.based in USA
Saddle bodies shall be constructed of ductile iron per ASTM A536, Grade 65-45-12, AWWA C153 standards. RSST, RSDT, RSLS- and RDLS-Series straps, and hardware shall be 304 stainless steel. Saddle gaskets shall be constructed of high grade EPDM rubber per ANSI/AWWA C111/A21.11 standards. Epoxy coating shall be 10-12MM thick to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you