Backflow Prevention Equipment For Water And Wastewater Available In Delaware
-
ShowcaseManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-BEND Bending Weir System is designed to maintain maximum water levels upstream of the weir, thus allowing full usage of all the available upstream storage volume, while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The ACU-BEND’s unique, patented and extensively tested design operates by only allowing any excess water in the system ...
-
PremiumManufactured by Tecnidro Srlbased in ITALY
The valve isolates pumps from the system during pumps starting and stopping to protect pipe lines and pumps itself. The valve is equipped with a control solenoid valve that is switched on at pump starting and is able to fulfill pipe line gradually, reducing pressure rising peaks and allowing soft starting of the pump with closed outlet. The valve controls pump stopping as well, gradually closing ...
-
PremiumManufactured by Raven Environmental Products, Inc.based in USA
Quickly and Accurately Measure Media Expansion during Backwash. Achieving proper media filter bed expansion during backwash in gravity filters is a crucial step in maintaining filter performance and longevity. The US EPA recommends 20% to 25% filter bed expansion to adequately clean the filter media (anthracite, sand). Failure to expand the bed sufficiently will result in "mud balls" that degrade ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco ProFlex 720 in-line flanged rubber duckbill check valve is designed to fit directly inside of an existing pipe. This particular valve is supplied with a flat face rubber flange, which allows installation between existing pipe flanges, and eliminates the need for a valve body. Various drilling standards are available upon ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco ProFlex™ Style 730 rubber duckbill check valves are designed to easily slip over an existing pipe and be attached with heavy-duty stainless steel clamps. It can be installed in both vertical and horizontal ...
-
PremiumManufactured by Flood Defense Groupbased in USA
We have met with countless flood victims who have experienced water backflowing through underground piping during a flood event. This is our answer to the question ‘ how to stop water from backflowing or coming out a drain during a flood ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco ProFlex Style 750 jacketed flanged rubber check valves are designed with a full metal enclosure, for easy installation within existing piping ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The SURE-FLAP Check Flap System is designed to prevent flooding and backflows caused by high downstream water levels. The SURE-FLAP can and has been installed at combined sewer overflow (CSO) locations, sanitary sewer overflow (SSO) locations, retention tank overflows and basin overflows. Overloading of sewer systems and sewage treatment plants is avoided and energy costs for pumping systems and ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The TRU-FLAP Floating Flap System is designed to prevent flooding and backflows caused by high downstream water levels and acts as a floating weir whose crest elevation self-adjusts. The TRU-FLAP can and has been installed at combined sewer overflow (CSO) locations, sanitary sewer overflow (SSO) locations, retention tank overflows and basin overflows. Overloading of sewer systems and sewage ...
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
The BBA Pumps 6-inch portable non-return check valve is designed for use in the field on temporary piping systems. The quick couplings are made of high quality materials and are compatible with the bauer systems. Portable non-return check valves are often used in pumping projects to prevent backflow where several pumps are connected to a collection pipe, or as a back-up swing valve in sewage ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The TRU-BEND Overflow Bending Weir System is designed to maintain maximum water levels upstream of the weir thus allowing full usage of all the available upstream storage volume while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The TRU-BEND’s unique and extensively tested design operates by only allowing any excess water in the system to ...
-
PremiumManufactured by Proco Products, Inc.based in USA
What Does a Coarse Bubble Diffuser Do? Coarse bubble diffusers aerate or mix wastewater for effluent / sewage treatment and pollution control. A coarse bubble diffuser produces bubbles which rise from the floor of a wastewater treatment plant or sewage treatment tank. They are used in grit chambers, equalization basins, primary and secondary settling ponds, and areas where sediment settling is a ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The ProFlex™ Style 730M is the most recent addition to the ProFlex™ line of rubber check valves. The Style 730M is a molded rubber light weight check valve. This type of check valve is available ranging in sizes from 3/4” to 6” pipe diameter and can be directly mounted to the OD of schedule 40 pipe. The complete size range is supplied with a ¾” -300 Stainless ...
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
The BBA Pumps 4-inch portable non-return check valve is designed for use in the field on temporary piping systems. The quick couplings are made of high quality materials and are compatible with the bauer systems. Portable non-return check valves are often used in pumping projects to prevent backflow where several pumps are connected to a collection pipe, or as a back-up swing valve in sewage ...
-
PremiumManufactured by Amafilter®based in NETHERLANDS
The bag positioner is both a positioning aid as well as a bag support in reverse flow. It is available for filters AFB/AFZ-90 (size 1 bags) and filters AFB/AFZ-180 (size 2 ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco ProFlex Style 770 and 780 wafer style rubber check valves feature many design benefits, including: All-rubber construction to resist abrasive slurries. NSF 61 standard construction. Ultra-quiet operation, with no water hammer. Unique design to prevent backflow. Negligible maintenance and energy costs. Will not warm or freeze. Quick interchange with any flap type check valve. Available ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The SURE-BEND Hydraulically Operated Bending Weir System is designed to maintain maximum water levels upstream of the weir thus allowing full usage of all the available upstream storage volume while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The SURE-BEND’s unique and extensively tested design operates by only allowing any excess water ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-FLAP Check Element System is designed to prevent flooding and backflows caused by high downstream water levels. The ACU-FLAP can and has been installed at combined sewer overflow (CSO) locations, sanitary sewer overflow (SSO) locations, retention tank overflows and basin overflows. Overloading of sewer systems and sewage treatment plants is avoided and energy costs for pumping systems and ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The ProFlex Style 790 Low Headloss In-Line Rubber Check Valve design allows for a passive flow and allows the valve to be installed without having to do any modifications to existing structures or costly pre-install planning. The unique fold away design of the inner sleeve also allows for a near full port flow, allowing for quick drainage. The ProFlex Style 790 Low Headloss In-line Rubber Check ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
FCI Model AS-LLS is a no moving parts, ultra-reliable level switch which detects the presence or absence of liquid or interface at the sensing location. The AS-LLS level switch is directly installed into tanks, reservoirs, sumps and gearboxes on commercial and military aircraft, as well as spacecraft, vehicles and marine applications. The sensor uses FCI proven thermal dispersion technology to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you