Backflow Prevention Equipment For Water And Wastewater Near Massachusetts
-
Manufactured by Tideflex Technologies - a Division of Red Valve Company, Inc.based in USA
Patented by Red Valve Company, the CheckMate Inline Check Valve is ideal for backflow prevention and odor mitigation. In outfalls, stormwater, CSO and SSO applications, the CheckMate's custom-engineered, all-rubber unibody design eliminates costly backflow from oceans, rivers and interceptors. CheckMate Valves are readily available in 4' to 72' sizes. The CheckMate is built to suit all your site ...
-
PremiumManufactured by Proco Products, Inc.based in USA
What Does a Coarse Bubble Diffuser Do? Coarse bubble diffusers aerate or mix wastewater for effluent / sewage treatment and pollution control. A coarse bubble diffuser produces bubbles which rise from the floor of a wastewater treatment plant or sewage treatment tank. They are used in grit chambers, equalization basins, primary and secondary settling ponds, and areas where sediment settling is a ...
-
Manufactured by Aquarius Technologies, LLCbased in USA
The Flexcap™ diffuser solution is designed for high solids applications where fixed orifice coarse bubble or fine bubble diffusers are prone to plugging. The diaphragm check valve diffuser releases air from its underside reducing plugging. The diffuser cap seals tightly to the base of the diffuser preventing any backflow into the diffuser or piping when the air is shut off. Installation ...
-
Manufactured by Tideflex Technologies - a Division of Red Valve Company, Inc.based in USA
The Tideflex Technologies Series 39 Slurry Duckbill Check Valve is designed to handle abrasive slurries, sewage, sludge and other difficult services. At the heart of the Series 39 Duckbill Check Valve is a fabric-reinforced elastomer check sleeve that provides thru-flow at minimum pressure drop across the valve at all times. Forward pressure opens the valve automatically; reverse pressure seals ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The ProFlex™ Style 730M is the most recent addition to the ProFlex™ line of rubber check valves. The Style 730M is a molded rubber light weight check valve. This type of check valve is available ranging in sizes from 3/4” to 6” pipe diameter and can be directly mounted to the OD of schedule 40 pipe. The complete size range is supplied with a ¾” -300 Stainless ...
-
Manufactured by Tideflex Technologies - a Division of Red Valve Company, Inc.based in USA
Inner connecting channels within wastewater treatment facilities are designed to route the wastewater flow from one process equipment zone to the next. These wastewater streams can contain organic materials, biosolids, and inorganic materials (silica, grit, and settleable solids). The hydraulic flowrate through these channels is typically low in linear velocity resulting in the settling and ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco ProFlex Style 770 and 780 wafer style rubber check valves feature many design benefits, including: All-rubber construction to resist abrasive slurries. NSF 61 standard construction. Ultra-quiet operation, with no water hammer. Unique design to prevent backflow. Negligible maintenance and energy costs. Will not warm or freeze. Quick interchange with any flap type check valve. Available ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-FLAP Check Element System is designed to prevent flooding and backflows caused by high downstream water levels. The ACU-FLAP can and has been installed at combined sewer overflow (CSO) locations, sanitary sewer overflow (SSO) locations, retention tank overflows and basin overflows. Overloading of sewer systems and sewage treatment plants is avoided and energy costs for pumping systems and ...
-
Manufactured by In-Situ Environmentalbased in USA
The Aqua TROLL 400 Low-Flow Pelican Case is a field-ready, waterproof, protective case that holds everything you need to perform Low-Flow groundwater sampling with the Aqua TROLL 400 Multiparameter Probe. The case includes a foam insert with cutouts to hold the Aqua TROLL 400 Instrument, cable, battery pack, mobile device, calibration solutions, flow cell, flow cell fittings, and base plate. The ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco ProFlex™ Style 730 rubber duckbill check valves are designed to easily slip over an existing pipe and be attached with heavy-duty stainless steel clamps. It can be installed in both vertical and horizontal ...
-
Manufactured by Tideflex Technologies - a Division of Red Valve Company, Inc.based in USA
The Tideflex Series 37-G is a special adaptation of the Series 37. The 37-G can be completely inserted into a pipe which effectively gives it a zero face to face dimension. The outside diameter of the 37-G’s cuff is fabricated to precisely match the inside diameter of the pipe, providing a press-fit. The valve is supplied with an internal expansion clamp to provide compression between the ...
-
Manufactured by Tideflex Technologies - a Division of Red Valve Company, Inc.based in USA
The Tideflex Series 37-G Thimble Insert is comprised of a Series 37-G Duckbill Check Valve mounted in a thimble. The 37-G is pre-assembled, clamped and pinned into the thimble prior to shipment. The Thimble Insert can be provided flangeless or with a circular or rectangular flange and the 37-G can either face the flange or away from the flange depending on the installation orientation and flow ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-BEND Bending Weir System is designed to maintain maximum water levels upstream of the weir, thus allowing full usage of all the available upstream storage volume, while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The ACU-BEND’s unique, patented and extensively tested design operates by only allowing any excess water in the system ...
-
Manufactured by Tideflex Technologies - a Division of Red Valve Company, Inc.based in USA
The Tideflex Series 35 in manufactured similarly to the Series TF-2, with the addition of an integral elastomeric flange. The 35 can be mounted to mating flanges or wall thimbles or directly to concrete walls. The 35 design has been enhanced by the 35-1, flat-bottom, Duckbill Check Valve. The 35-1 requires minimal bottom clearance and the inherent geometry and construction of the 35-1 yields a ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The TRU-FLAP Floating Flap System is designed to prevent flooding and backflows caused by high downstream water levels and acts as a floating weir whose crest elevation self-adjusts. The TRU-FLAP can and has been installed at combined sewer overflow (CSO) locations, sanitary sewer overflow (SSO) locations, retention tank overflows and basin overflows. Overloading of sewer systems and sewage ...
-
Manufactured by Tideflex Technologies - a Division of Red Valve Company, Inc.based in USA
The Tideflex Series 37 In-Line Duckbill Check Valve is a simple, reliable, cost-effective solution for backflow prevention. The revolutionary design of the 37 is similar to the Series 35, but the Series 37 “bill” does not flare and is designed to be inserted into the downstream pipe and fastened between two mating flanges, eliminating the need for a valve body. Since most of the valve ...
-
Manufactured by Verderflex Peristaltic Pumps - part of the Verder Groupbased in UNITED KINGDOM
Verderflex pumps stand apart from their competitors: reliable innovative, high performance, peristaltic pumps that pump difficult products in tough ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The SURE-FLAP Check Flap System is designed to prevent flooding and backflows caused by high downstream water levels. The SURE-FLAP can and has been installed at combined sewer overflow (CSO) locations, sanitary sewer overflow (SSO) locations, retention tank overflows and basin overflows. Overloading of sewer systems and sewage treatment plants is avoided and energy costs for pumping systems and ...
-
Manufactured by Tideflex Technologies - a Division of Red Valve Company, Inc.based in USA
Tideflex Technologies’ developed a special series of Tideflex Duckbill Check Valves called Tideflex Diffuser Valves (TFD). TFD’s differ from standard Tideflex because TFD’s are custom-designed for every outfall based on jet velocity, open area and headloss requirements that are critical to achieving the required initial dilution within the hydraulic head limitations of the ...
-
Manufactured by Tideflex Technologies - a Division of Red Valve Company, Inc.based in USA
The Waterflex Check Valve is specifically designed for potable water and clean water applications with low suspended solids. The valves are NSF61 Certified for potable water applications. The Waterflex comprises a rod-guided ply-reinforced membrane and perforated disc. The Waterflex is available in a full-body design (WF-1), a wafer style (WF-2) and full-faced wafer style with ANSI, DIN or other ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you