Backwater Equipment For Water And Wastewater Available In British Columbia
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
Thermoplastic pipe, valves, fittings and related products for plumbing and mechanical applications. ...
-
Manufactured by Jay R. Smith Mfg. Co.based in USA
General service floor drain for use in showers, toilets, kitchens and other finished areas where foot traffic is expected. The round top strainer head is used for all types of poured finished floors. The square top is particularly adaptable to floors that are finished in material of square or straight line pattern. Reversible flashing collar permits adjustment of the strainer to meet finished ...
-
Manufactured by Mifab, Inc.based in USA
MIFAB Series BV1250 backwater valve with neoprene rubber ...
-
Manufactured by Mainline Backflow Products (Can) Inc.based in CANADA
The Mainline #4963 Full-Port Backwater Valve is the ‘flagship’ of the company. Established in 1997, this valve has revolutionized sewer protection across North America with its patented ‘normally open’ gate design. This valve is typically installed in homes or buildings that have basements, cellars, crawl spaces or area that are accessible for servicing. The normally open ...
-
Manufactured by WaStop International ABbased in SWEDEN
The WaBack Access Chamber provides you with peace of mind. Once installed theWaBack Access chamber provides complete protection against backflow in the sewer or combined sewer network. One ingenious product protects your basement or property from flooding caused by an overload or surcharge in the sewer ...
-
Manufactured by Kessel AGbased in GERMANY
The motorised backwater valveStaufix FKA can be used as central backwater protection for waste water containing sewage according to EN 13564 Type 3 F. It is suitable for toilets, showers, sinks and washing machines that are located in the cellar. Cellar steps up to 5 m² can also be drained via the backwater valve, if penetration of rainwater into the building during the backwater phase is ...
-
Manufactured by Mainline Backflow Products (Can) Inc.based in CANADA
An Inspection Chamber is a clean-out generally installed at the property line of a building. It allows the municipality or city to access the sanitary or storm sewers without disturbing the building owner. The municipality or city can service the laterals to the building with cleaning equipment for blockages or they can camera the lateral for inspection purposes. An Inspection Chamber installed ...
-
Manufactured by Mainline Backflow Products (Can) Inc.based in CANADA
Fully mechanical operation—no electricity required! Full port prevents obstruction of flow and trapped debris. In-Line Construction for easy installation in existing building. Positive Seal 99.9% effective in preventing leakage beyond the valve with 45 foot head of water pressure. Cast Iron Body and Stainless Steel Knife Gate for Long life and ...
-
Manufactured by Wadebased in USA
Regularly Furnished: Cast iron backwater valve with bolted, gasketed ...
-
Distributed by Source One Environmental Ltdbased in UNITED KINGDOM
Simply ensure that all below ground areas with open drainage fixtures are protected by a Kessel Backwater Valve. The Staufix Backwater Valve range manufactured by Kessel are equipped with free hanging vertical backwater flaps. These flaps ensure that the building's wastewater freely flows outwards through the valve, whilst at the same time prevent any backwater from backing up into the ...
-
Manufactured by Kessel AGbased in GERMANY
We are also constantly putting existing products to the test. Our focus here is always on the product quality so that we can guarantee functional reliability and easy installation. And so we have made the impossible possible and made the original Staufix backwater valve even ...
-
Manufactured by Mainline Backflow Products (Can) Inc.based in CANADA
The Adapt-a-Valve Extendible Backwater Valve was invented because there was a need to have easy access to enable servicing of backwater valves deeper than 2 feet. The only other options were expensive and unsightly ‘vaults’ or ‘access culverts’ in which someone had to crawl down to service the backwater valve. Another option, which was strictly against code but done by ...
-
Manufactured by Kessel AGbased in GERMANY
Backwater damage can be extremely expensive - prevention is very cheap. For this reason make sure that all areas below the backwater level with open drainage fixtures are always protected by a KESSEL backwater valve. The Staufix Basic backwater valve is equipped with free hanging vertical backwater flaps. These flaps ensure that a building Ìs wastewater flows freely through the valve ...
-
Distributed by Source One Environmental Ltdbased in UNITED KINGDOM
Used widely as a flood protection measure, the system successfully pumps against backwater flow - wastewater is never allowed to build up, even in the presence of backwater. So whether protecting individual drainage fixtures such as sinks, showers and bath tubs or integrating a backwater / anti-flood valve or pump into a floor drain, we can advise and supply the best system to suit your ...
-
Manufactured by Mifab, Inc.based in USA
MIFAB Series BV1000 lacquered cast iron backwater valve with no hub inlet and outlet, gasketed bolted cover, and automatic pvc flapper type backwater ...
-
Manufactured by Mainline Backflow Products (Can) Inc.based in CANADA
The Straight-Fit Backwater Valve features a patent pending flapper, designed to smoothly guide cleaning and surveying equipment through the BWV, also allowing for safe withdrawal of the same, minimizing risk of damage to the flapper. The addition of a Smart- Curve snake guide also prevents damage to the valve body during snaking from the main access. The Straight-Fit Valve body design has minimal ...
-
Manufactured by Kessel AGbased in GERMANY
With theEcoliftXL, KESSEL is now also supplying a hybrid lifting station for use in commercial buildings and multi-family homes. The advantage the hybrid lifting station has over traditional lifting stations is thatEcoliftXLuses the efficiency of natural gradient during normal operation – theEcoliftXLonly uses its pumps during times of backwater or flooding, pumping the building’s ...
-
Manufactured by NEUHOLD Environmental Technologybased in AUSTRIA
NEUHOLD backwater flaps are used in connection to surface, sewer and process water systems.Water discharging from the pipe opens the flap, however when the head increases on the downstream side, the flap is pressed against it's seal, preventing backflow. Backwater flaps require only a small head in the pipe to open the flap, as HDPE floats in water - the backwater flaps are fitted with a ...
-
Manufactured by Febco - a Brand of Watts Water Technologies Companybased in USA
Watts BV-200 cast iron backwater valve with gasketed cover, bronze seat and flapper, and no hub ...
-
Manufactured by Fernco Ltdbased in UNITED KINGDOM
Fernco’s, previously known as Flexseal, Non-return valves allow sewer or surface water materials to freely flow in the direction of the systems mains but block backflow of those materials in the opposite direction in instances, such as, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you