Backwater Equipment For Water And Wastewater Available In Papua New Guinea
-
Manufactured by Mifab, Inc.based in USA
MIFAB Series BV1000 lacquered cast iron backwater valve with no hub inlet and outlet, gasketed bolted cover, and automatic pvc flapper type backwater ...
-
Manufactured by Kessel AGbased in GERMANY
The motorised backwater valveStaufix FKA can be used as central backwater protection for waste water containing sewage according to EN 13564 Type 3 F. It is suitable for toilets, showers, sinks and washing machines that are located in the cellar. Cellar steps up to 5 m² can also be drained via the backwater valve, if penetration of rainwater into the building during the backwater phase is ...
-
Manufactured by Kessel AGbased in GERMANY
We are also constantly putting existing products to the test. Our focus here is always on the product quality so that we can guarantee functional reliability and easy installation. And so we have made the impossible possible and made the original Staufix backwater valve even ...
-
Manufactured by Kessel AGbased in GERMANY
Backwater damage can be extremely expensive - prevention is very cheap. For this reason make sure that all areas below the backwater level with open drainage fixtures are always protected by a KESSEL backwater valve. The Staufix Basic backwater valve is equipped with free hanging vertical backwater flaps. These flaps ensure that a building Ìs wastewater flows freely through the valve ...
-
Manufactured by WaStop International ABbased in SWEDEN
The WaBack Access Chamber provides you with peace of mind. Once installed theWaBack Access chamber provides complete protection against backflow in the sewer or combined sewer network. One ingenious product protects your basement or property from flooding caused by an overload or surcharge in the sewer ...
-
Manufactured by NEUHOLD Environmental Technologybased in AUSTRIA
NEUHOLD backwater flaps are used in connection to surface, sewer and process water systems.Water discharging from the pipe opens the flap, however when the head increases on the downstream side, the flap is pressed against it's seal, preventing backflow. Backwater flaps require only a small head in the pipe to open the flap, as HDPE floats in water - the backwater flaps are fitted with a ...
-
Manufactured by Kessel AGbased in GERMANY
The twin flap backwater valve Staufix SWA can be used as central backwater protection according to EN 13564 type 2. It is suitable for showers, sinks and washing machines that are located in the basement. Cellar steps up to 5 m² can also be drained via the backwater valve, if penetration of rainwater into the building during the backwater phase is prevented by a thresher or similar ...
-
Manufactured by Febco - a Brand of Watts Water Technologies Companybased in USA
Watts BV-200 cast iron backwater valve with gasketed cover, bronze seat and flapper, and no hub ...
-
Manufactured by Jay R. Smith Mfg. Co.based in USA
General service floor drain for use in showers, toilets, kitchens, and other finished areas where foot traffic is expected. The round top strainer head is used for all types of poured finished floors. The square top is particularly adaptable to floors that are finished in material of square or straight line pattern. Reversible flashing collar permits adjustment to meet finished floor ...
-
Manufactured by Kessel AGbased in GERMANY
Pumpfix F pumps against backwater and discharges surface water. It protects drainage fixtures such as shower, sink, washing machine and outside steps down to the basement which are below the backwater level. The wastewater is discharged continually and without the use of energy to the sewer through gravity. In the event of backwater the pump macerates any solids and and pumps the building's ...
-
Manufactured by Kessel AGbased in GERMANY
With theEcoliftXL, KESSEL is now also supplying a hybrid lifting station for use in commercial buildings and multi-family homes. The advantage the hybrid lifting station has over traditional lifting stations is thatEcoliftXLuses the efficiency of natural gradient during normal operation – theEcoliftXLonly uses its pumps during times of backwater or flooding, pumping the building’s ...
-
Manufactured by Fernco Ltdbased in UNITED KINGDOM
Fernco’s, previously known as Flexseal, Non-return valves allow sewer or surface water materials to freely flow in the direction of the systems mains but block backflow of those materials in the opposite direction in instances, such as, ...
-
Manufactured by Sumak Pompa A.Ş.based in TURKEY
Drainage pumps with monophasic electric, easy-to-install, self-running, floatered submersible drainage pumps. It is manufactured at frequencies of 50 Hz and 60 ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
Thermoplastic pipe, valves, fittings and related products for plumbing and mechanical applications. ...
-
Manufactured by Mifab, Inc.based in USA
MIFAB Series BV1250 backwater valve with neoprene rubber ...
-
Manufactured by Jay R. Smith Mfg. Co.based in USA
General service floor drain for use in showers, toilets, kitchens and other finished areas where foot traffic is expected. The round top strainer head is used for all types of poured finished floors. The square top is particularly adaptable to floors that are finished in material of square or straight line pattern. Reversible flashing collar permits adjustment of the strainer to meet finished ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you