Ball Valves Articles

  • Installation Steps of Sanitary Ball Valve

    The sanitary ball valve uses a special molding process to allow a dense sealing surface to achieve zero leakage. Its sphere and shank are fused as one to remove the valve stem from pressure due to pressure changes within the possibility of pressure pieces and, therefore, achieve the fundamental guarantee of safety. It uses a full metal hard welding process that is resistant to strong corrosion. ...


    By Adamant Valves

  • Options and Advantages of Sanitary Ball Valves

    Sanitary ball valves are sometimes referred ...


    By Adamant Valves

  • Configurations of Sanitary Ball Valves

    Sanitary ball valves are designed to control the transmission of the product. They are mainly used in the pharmaceutical, food, and beverage ...


    By Adamant Valves

  • Sanitary Ball Valve Requirements and Maintenance

    Regarding the requirements of sanitary valves, the most important requirement is their material because it is in direct contact with the flow of the media. In general, sanitary tap materials are made of stainless steel and the two main materials are 304 and 316L. These two stainless sheets of steel are the most resistant to corrosion. As a result, they will not easily ...


    By Adamant Valves

  • Sanitary Valves and Their Main Utilities

    Valves are commonly used throughout our daily lives. They are used to make our lives more convenient and comfortable at home, at the office, and in the industry. There is a wide range of valves available ...


    By Adamant Valves

  • Benefits of Sanitary Ball Valves in Beverage Industries

    There is a wide range of sanitary ball valves today. That's why it's important to have a valve that meets your requirements. More importantly, it must give you value for your money. You also want ...


    By Adamant Valves

  • Why Are the Sanitary Ball Valves Useful?

    A spherical disc is attached to the ball valves. This is the part of the valve that controls flow from start to finish. The disc, sphere has a hole through the middle with both ends of the valve, it allows the flow to take place. When the valve is closed, the flow is blocked because the hole is perpendicular to the slit ends of the valve. So, the handle and the port come in a ...


    By Adamant Valves

  • Advantages of Sanitary Valves with Electric Appliances

    The sanitary valve with electrical device refers to the sanitary valve driven by an electric motor to manipulate. The valve driven by an electrical device has the following advantages: 1. It can significantly reduce the time to open and close the valve. 2. It can greatly ...


    By Adamant Valves

  • Characteristics of the Pneumatic Sanitary Ball Valve

    1. Its fluid resistance is small. The resistance of the ball valve is the smallest fluid of all the valves. Even a ball valve of reduced diameter, the resistance to the fluid is quite low. 2. It is durable and zero leakage. For automatic packaging equipment, the pneumatic ball valve is preferred. ...


    By Adamant Valves

  • Off-center Sanitary Butterfly Valve Advantages

    Offset sanitary butterfly valves, sometimes referred to as disc valves, are generally closer to ball valves than traditional quick-install butterfly valves in terms of sealing and application. When closed, although the disc is also vertically flowing, the disc of the ...


    By Adamant Valves

  • People-oriented Sanitary Ball Valve Design Idea

    In the sanitary ball valve design process, the main consideration is its material, structure, mechanical strength, work performance, service life and other factors. In evaluating the performance of the valve, these indicators are generally ...


    By Adamant Valves

  • How to Install Stainless Sanitary Ball Valves

    Here are some steps for installing a stainless sanitary ball valve. Remove the protective cap on both sides of the flange first and clean it with the valve fully open. Before installation, it should carry out the whole machine ...


    By Adamant Valves

  • Features of Pull Rod Welding Ball Valve

    Pull rod welding ball valve has impressive performances in various industries. Because of excellent properties and high reliability, pull rod welding ball valve attracts more attentions than cast steel ball valve. Currently, pull rod welding ball valve has been widely applied in urban gas, urban heating, petrochemical industry, shipbuilding, steel and other industries. The followings are the ...

  • Keeping Your Control Valves in Good Health

    Whether that brand new control valve in your system is the first one you have ever had to look after or if you are an old hand at valve maintenance with tens of valves in your system, there are a few simple guidelines and reminders for keeping it operating at optimal performance. It’s important to physically check valves at least every 12 weeks or so, assuming everything is running fine in ...


    By Singer Valve Inc.

  • Don’t Let Your Control System Control You

    Regular maintenance ensures valves remain healthy. If your system is operating properly, you should physically inspect all valves at least every 12 weeks to check for tubing leaks and other abnormalities. Pressure gauges should be checked to ensure each valve is performing as designed. If you find something wrong, refer to the appropriate instruction manual, which may be available online. Because ...


    By Singer Valve Inc.

  • Control valve actuators: Their Impact on control and variability

    Sector: Oil & gas Category: Electric actuators Products: CVA Electric control valve actuators provide excellent performance and are ideal for oil and gas wells in remote production fields. Instrument air supply systems are costly and require significant energy to run. If mains power isn't available, an instrument air supply isn't ...


    By Rotork plc

  • Control valve actuators: Their Impact on control and variability

    Electric control valve actuators provide excellent performance and are ideal for oil and gas wells in remote production fields. Instrument air supply systems are costly and require significant energy to run. If mains power isn't available, an instrument air supply isn't practical, especially when only a few control valves are in use at a location. Solar powered DC electric actuators are ideal for ...


    By Rotork plc

  • Valve actuation and control in the modern refinery - Case Study

    Introduction The Reliance refinery at Jamnagar in India is one of the largest single refinery sites in the world and virtually all of its valves are motorised with Rotork actuators. Almost 3000 Rotork IQ intelligent valve actuators were installed during the construction of the original refinery, tank farm and power station in the late 1990s, together with a Rotork Pakscan 2E two-wire ...


    By Rotork plc

  • Control valve actuators: their impact on control & variability - Case Study

    New electric control valve actuators provide significant control and reduced variability benefits over compressed air actuators in a wide range of process applications, resulting in superior control performance, fewer maintenance problems and energy savings. In a process plant, the general function of a control valve is to restrict the opening of the valve so it affects the flow or pressure of ...


    By Rotork plc

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you