Ball Valves Equipment For Water And Wastewater In Europe
-
ShowcaseManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The handy Mini Series consists of the following individual components which can be assembled as complete ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
ST80 is a high performance, rugged thermal dispersion technology air/gas flow meter that combines ultra-reliable, feature-rich electronics, and FCI innovations such as Adaptive Sensing Technology (AST) with the industry's most extensive selection of application-matched flow sensors, including FCI's new "wet gas" flow element, to provide a truly superior solution for industrial processes and plant ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The GO-FLO sampling bottle feature a close-open-close operation. Opens automatically (hydrostatic pressure activated) at approximately 10 meters (33 feet), then flushes until closed by standard GO Devil messenger (model 1000-MG) individually, serially, or sequentially by remote command with a model 1015 Rosette multibottle array, or with model AR1015 Acoustic Command Control. Inert gas can be ...
-
PremiumManufactured by FPZ S.p.A.based in ITALY
Doseuro pre-engineered JSO metering systems are designed to provide a complete dosing solution for all our metering pumps. JSO metering systems include rugged PP frames (1.5 cm) for single or dual dosing pumps and inlet and outlet discharge piping. Inlet piping includes an isolation ball valve, Y filter and calibration pot. Discharge piping includes isolation ball valves, pulsation dampeners, ...
-
PremiumManufactured by Lutz Pumpen GmbHbased in GERMANY
The Suspensomat makes it possible to pre-dissolve the dry substances, using the preparation water in such a way that they are distributed homogeneously on intoduction into the container. The Suspensomat is a cone, equipped with a number of tangentially directed, single stream nozzles on the upper edge, which form a rapidly rotating film of water over the entire surface of the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Ball valve for tube inside Ø 8 mm, largest Ø 12 mm, stainless steel, set of 5 ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Depending on the type of water, suspended solids concentration, oil and grease, COD, BOD and pesticides contents, activated carbon filters are sized differently, but the basic design data to clarify natural ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Fib-R-Thane is an elastomeric lining composed of fiber-reinforced, asphalt-modified urethane. Fib- R-Thane is used as a chemical-resistant membrane or gasket seal for the protection of concrete, block and steel. Available in two formulations, Fib-RThane No. 88T is applied by trowel, while No. 88S is the sprayable ...
-
PremiumManufactured by ENVICON GmbHbased in GERMANY
ENVICON Formic Acid Dosing Stations are used to clean and regenerate the ENVICON Aerators, Types EKR/EKS and EMR/EMS with 85% formic acid. The wastewater constituents cause organic and inorganic deposits to form on the ceramic components and as well as on the membranes and in the slits of these, which increase the loss in operating pressure and reduce oxygen input. As a result, the operating ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The GO-FLO sampling bottle feature a close-open-close operation. Opens automatically (hydrostatic pressure activated) at approximately 10 meters (33 feet), then flushes until closed by standard GO Devil messenger (model 1000-MG) individually, serially, or sequentially by remote command with a model 1018 or 1015 Rosette multi-bottle array. Inert gas can be injected into bottle to force retrieved ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The GO-FLO sampling bottle feature a close-open-close operation. Opens automatically (hydrostatic pressure activated) at approximately 10 meters (33 feet), then flushes until closed by standard GO Devil messenger (model 1000-MG) individually, serially, or sequentially by remote command with a model 1015 Rosette multibottle array, or with model AR1015 Acoustic Command Control. Inert gas can be ...
-
PremiumManufactured by Genesis Water Technologies, Inc.based in USA
Reverse Osmosis (RO) is a widely accepted technology for tertiary wastewater reuse. In these applications based on the pretreatment used, RO water recoveries can be between 70-90% with salt rejection rates between 90-99%. The most critical issue in treating industrial wastewater using GWT Reverse Osmosis technology is pretreatment. Secondary pretreatment guards these RO membranes from the effects ...
-
PremiumManufactured by Genesis Water Technologies, Inc.based in USA
Allen Bradley PLC with HMI (Human Machine Interface). Heavy Duty 5 micron Sediment Cartridge Pre-filter with Pressure Gauges. Exclusive GWT DLP Series Nano Fiber Pre filtration Technology. High Efficiency 316 Stainless Steel Centrifugal Pump. Automatic Inlet Feed Shut off Valve. FRP Pressure Vessels. Permeate & Concentrate Flow Meters. Liquid Filled Pressure Gauges. Permeate Conductivity ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The GO-FLO sampling bottle feature a close-open-close operation. Opens automatically (hydrostatic pressure activated) at approximately 10 meters (33 feet), then flushes until closed by standard GO Devil messenger (model 1000-MG) individually, serially, or sequentially by remote command with a model 1015 Rosette® multibottle array, or with model AR1015 Acoustic Command Control. Inert gas can ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Multisampler, rod operated, transparent acrylic, Ø 50 mm, length 1 m, contents 1.14 l, bayonet (inclusive 1 sharp cutting head and 1 cutting head with ball valve seating and ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
Refilling device as cylinder cart for comfortable on board carrying of a gas bottle. The primary gauge of the pressure reducer displays the bottle pressure in bar, psi and kPa. The secondary gauge indicates the desired filling pressure to be set easily by means of the handle. The bottle pressure can be reduced to the desired filling pressure by the integrated pressure reducer. The weight of the ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The GO-FLO sampling bottle feature a close-open-close operation. Opens automatically (hydrostatic pressure activated) at approximately 10 meters (33 feet), then flushes until closed by standard GO Devil messenger (model 1000-MG) individually, serially, or sequentially by remote command with a model 1018 or 1015 Rosette multi-bottle array. Inert gas can be injected into bottle to force retrieved ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Ball valve for tube inside Ø 10 mm, largest Ø 15 mm, stainless steel, set of 5 ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
Technical data: Dimensions: Length 435 mm, Width 270 mm, Height 370 mm. Weight: 29 kg. Standard equipment: Vacuum pump for evacuation of air 16 m³/h (at 50 Hz) and 19 m³/h (at 60 Hz), final vacuum < 1 mbar. DILO couplings DN20. Ball valve or solenoid valve DN20. Digital vacuum indication (0 - 400 mbar). 3 m long electrical connecting cable. Operating ...
-
PremiumManufactured by Lutz Pumpen GmbHbased in GERMANY
MAGDOS LD plays an important role in the reliable and accurate dosing of liquids in process sequences and is available in seven power ranges. Double-ball valves ensure accurate dosing. To adapt the dosing performance, the stroke frequency can be adjusted manually or via an external control contact. The dosing pump is compact and, thanks to the small mounting area, can be integrated into every ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you