Ball Valves Equipment For Water And Wastewater In New York
-
PremiumManufactured by Hilliard Corporationbased in USA
Like HILCO Transfer Valves, HILCO Ball valves provide uninterrupted flow during transfer of fluid. Unlike Transfer Valves, which are limited to liquid service, HILCO Ball Valves are available for both liquids and gases. They can provide sealing for API-598 Class II for liquid service and ANSI FC170-2 Class VI for gas service. They are available in Carbon Steel and 316 SS with PEEK seats and Viton ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The GO-FLO sampling bottle feature a close-open-close operation. Opens automatically (hydrostatic pressure activated) at approximately 10 meters (33 feet), then flushes until closed by standard GO Devil messenger (model 1000-MG) individually, serially, or sequentially by remote command with a model 1015 Rosette® multibottle array, or with model AR1015 Acoustic Command Control. Inert gas can ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The GO-FLO sampling bottle feature a close-open-close operation. Opens automatically (hydrostatic pressure activated) at approximately 10 meters (33 feet), then flushes until closed by standard GO Devil messenger (model 1000-MG) individually, serially, or sequentially by remote command with a model 1015 Rosette® multibottle array, or with model AR1015 Acoustic Command Control. Inert gas can ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The GO-FLO sampling bottle feature a close-open-close operation. Opens automatically (hydrostatic pressure activated) at approximately 10 meters (33 feet), then flushes until closed by standard GO Devil messenger (model 1000-MG) individually, serially, or sequentially by remote command with a model 1018 or 1015 Rosette multi-bottle array. Inert gas can be injected into bottle to force retrieved ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Heavy-duty stainless steel 316 housing part-turn gearboxes suited for plug, ball and butterfly valves serving the water, gas, chemical and power industries in corrosive ...
-
Manufactured by Air System Products, LLC. (ASP)based in USA
A fully automatic, zero loss drain that protects compressed air systems with out the need for electricity. Translucent reservoir for visual assurance of operation. Ideal to be used along with Oil/Water Separators. ...
-
Manufactured by PEX Universebased in USA
Available in stainless steel or brass body construction. Each radiant heat manifold package (set) has (1) supply manifold with flow meters, (1) return manifold with balancing valves, plus automatic air vent, fill/drain valves on each manifold, shut-off ball valves, supply and return temperature gauges, PEX adapters and mounting brackets. All units are pre-assembled and pressure tested. Manifold's ...
-
Manufactured by SVR Globalbased in USA
SVR Global is the foremost Forged steel ball valve manufacturer in USA. Forged steel is a substance made by combining iron and carbon under intense pressure. When steel is heated to forging temperature, it becomes ductile and malleable, which allows it to be molded into the desired shape with force and ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
IW Mk2 Quarter-Turn Worm Gearboxes. The new IW Mk2 worm gear operators have been designed to suit isolating duty motorised applications. The gearboxes include low lead angle gearing designed to be inherently self-locking, and offer an increased torque output per size compared to the previous IW range. IW Mk2 worm gear operators are quarter-turn devices intended for the operation of ball, plug ...
-
Manufactured by PMP Precision Valve Co. Ltd.based in CANADA
Locking Tab Washer: Keeps Lock nut from loosening in High Cycle Automated Applications. ISO 5211 Mounting Pad: Allows Direct Actuator Mounting Eliminating Costly Brackets - Adapters. Bi-Directional RPTFE Seats. PTFE Thrust Washer. Full Bore. Live Loaded Stem Packing: Keeps packing tight avoiding leaking valves and costly shutdowns or repairs.. TFE Body Seals. TFE Stem Packing with Viton O-Ring. ...
-
Manufactured by Crescent Tank Mfgbased in USA
850-Gallon Waste Tank: 192' x 96' x 12' (approximate). 1/4' mild steel construction . 2' Primary trap. 2' Secondary trap . 2-3' Site glass waste level indicators. 2' Ball valve allowing vacuum from either side. 3' discharge ball valve. 25'-2' Tiger Tail vacuum hose with wand assembly. Ladder. Work Light. 18'x18'x36' Tool box . Mud flaps. ...
-
Manufactured by Crescent Tank Mfgbased in USA
750-Gallon Waste Tank: 174' x 96' x 12' (approx.). 1/4' mild steel construction . 2' Primary trap. 2' Secondary trap . 2-3' Site glass waste level indicators. 2' Ball valve allowing vacuum from either side. 3' discharge ball valve. 25'-2' Tiger Tail vacuum hose with wand assembly. Ladder. Work Light. 18'x18'x36' Tool box . Mud flaps. ...
-
Manufactured by Xylem, Inc.based in USA
The Godwin Dri-Prime 2'/3' (50mm/75mm) CD75MA5 automatic priming centrifugal pump is the diesel equivalent of the gasoline-powered pump found on small dewatering jobs. Able to prime to 28 feet (8.5 meters) of suction lift from dry, the CD75MA5 also features indefinite dry-running capabilities due to the unique Godwin oil bath mechanical seal design. The model CD75MA5 offers flowrates to 370 ...
-
Manufactured by Crescent Tank Mfgbased in USA
550-Gallon Waste Tank includes: 120' x 96” x 12” (approx.). ¼” mild steel construction. 2” primary trap. 2” secondary trap. 2-3” site glass waste level indicators. 2” ball valve allowing vacuum from either side. 3” discharge ball valve. 25’-2” Tiger Tail vacuum hose with wand assembly. Ladder. Work lights . ...
-
Manufactured by J&S Valve, Incbased in USA
J&S Valve - Series 5000 - Metal Seated Ball Valve - Excellent for Pump Control and Shut-Off Applications. 100% Flow Area. Ductile Iron Body, Stainless Steel Hardware, and NSF61 Fusion Bonded Epoxy Coating Interior and Exterior. Contact our knowledgable staff for more information regarding specific applications. ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
The 242 range has been designed to optimise robustness and durability, whilst minimising non-structural mass and reducing the overall gearbox envelope by using the latest lean engineering principles and analytical design tools. The 242 series is based on the design and quality of the FB series which was designed to meet strict specifications. The 242’s simple, rugged construction makes it ...
-
Manufactured by Rotech Pumps & Systems Inc.based in CANADA
The heart of this valve is a reinforced rubber spherical ball. Because of the valve’s unique design, the ball can move freely within the valve. When the pump is started the ball moves to open position to allow free flow of liquid without any hindrance. This ball check valve has threaded ends and works vertically or horizontally. The valve can be supplied with NPT & BSP threaded ...
-
Manufactured by Ningbo Baodi Plastic Valve Co., Ltd.,based in USA
Ball valve material app temperature ...
-
Manufactured by Rotech Pumps & Systems Inc.based in CANADA
Essentially, this valve has a unique design consisting of a reinforced rubber spherical ball. The design of the valve allows the ball to move freely within the valve. The ball of the valve moves to open position as soon as the pump is started. This allows free flow of liquid without any hindrance. This ball check valve has threaded ends and works vertically or ...
-
Manufactured by Ningbo Baodi Plastic Valve Co., Ltd.,based in USA
Ball valve material app temperature ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you