We couldn't find any ballast water services suppliers or service providers located in Slovenia
Here is a list of services results with suppliers serving Slovenia
Ballast Water Services For Water And Wastewater Available In Slovenia
-
by MEA-nlbased in NETHERLANDS
Vessels sailing on the United States of America have to comply with the regulations for the 2013 Vessel General Permit (VGP). This will be replaced by the Vessel Incidental Discharge Act (VIDA) in the near future. MEA-nl can conduct analyses on your ballast water, grey water, bilge water and scrubber wash water. These vessels sailing to the United States of America and discharging effluents in US ...
-
based in UNITED KINGDOM
Since the introduction of steel-hulled vessels, water has been used as ballast to stabilize vessels at sea. Ballast water is pumped in to maintain safe operating conditions throughout a voyage. This practice reduces stress on the hull, provides transverse stability, improves propulsion and manoeuvrability, and compensates for weight changes in various cargo load levels and due to fuel and water ...
-
based in UNITED KINGDOM
Utilising the latest ROV technology to carry out underwater close visual inspections, this allows quick and effective initial inspection as well as ongoing monitoring of defects. Work scopes include inspection of water ballast tanks (including thickness measurements as part of class surveys), potable water tanks, external hull surveys, mooring chains, propellers and risers. Advantages include no ...
-
by Drew Marinebased in USA
The quality of produced freshwater can be negatively affected by scale formation from seawater, deposits, and brine carryover, which can lead to foaming and contaminates in distillate. Specific parameters should be monitored regularly in produced water in order to protect the health of your crew. Drew Marine’s best-in-class desalination and evaporator treatments keep freshwater production ...
-
Manufactured by Ecochlorbased in USA
Ecochlorgoes beyond the other manufacturers by offering oversight of every system on board a vessel using real-time data analysis for each ballast operation and twice a year ship visits - current operational levels are at 98%! (June 2021). ...
-
by SGSbased in SWITZERLAND
SGS accredited environmental laboratory services test for a range of analytical parameters to provide the data you need to meet environmental regulatory requirements or assess the impact of your ...
-
Manufactured by ERMA FIRST ESK Engineering Solutions S.A.based in GREECE
ERMA FIRST, as a leading provider of ballast water treatment solutions, has extended its services from the ERMA FIRST BWTS sale and installation to the maintenance of it. As per current IMO (BLG17/4) and USCG requirements for BWTS compliance control, the good shape of the system, crew awareness and good record/ document keeping are the key checking points. As BWTS is a new system on board vessels ...
-
based in USA
CETCOMONARCH is the capital equipment sales arm made possible through an exclusive licensing agreement with Monarch Separators Inc. We offer integrated design, engineering, and manufactured equipment by CETCOMONARCH for oilfield and industrial oil/water separation and de-oiling ...
-
by SGSbased in SWITZERLAND
SGS accredited environmental laboratory services test for a range of analytical parameters to provide the data you need to meet environmental regulatory requirements or assess the impact of your activity. Call our expert team now to find out ...
-
Manufactured by Wartsila Corporationbased in FINLAND
Environmental Services provide products and solutions ranging from reduction of different air emissions (NOx, SOx, CO, VOC) and adaption to different fuels, to ballast water treatment and other water solutions. ...
-
Manufactured by Optimarin ASbased in NORWAY
The Ballast Water Treatment System business is moving into a new era, after the final phase of the IMO regulations became effective September 8th 2019. It is not only a requirement to have a BWTS installed on a ship, but the system must be used as well. For Optimarin this means that our Service organization is ready and prepared to support our customers all the way 24/7 around the ...
-
Manufactured by Energy & Machinery Korea Co., Ltdbased in SOUTH KOREA
With the endless research and development, we will open a new era of environment/energy and mechanical ...
-
Manufactured by Optimarin ASbased in NORWAY
The Optimarin Ballast Water Treatment System has predefined maintenance intervals. In collaboration with our vendors we have developed a recommended Service Parts Program that will ensure an operational system with minimal service requirements and downtime. ...
-
Manufactured by Bawat A/Sbased in DENMARK
Our commitment and dedication do not stop after the delivery of a Bawat BWMS. We offer you reliable after-sales service wherever you are in the ...
-
Manufactured by ERMA FIRST ESK Engineering Solutions S.A.based in GREECE
Extended service network in strategic points to support large number of installations worldwide. ERMA FIRST has fully trained representatives worldwide and large service stations in key areas like S. Korea and China. Far East is especially covered from ERMA FIRST Shanghai, where Technical Teams with over 60 experienced engineers and technicians are operating in full capacity to attend vessels ...
-
Distributed by Hyde Marine - a Calgon Carbon Companybased in USA
Properly investing in your ship’s ballast water treatment system means you will keep your operating costs in check and mitigate equipment problems in the future. The mission of Hyde Marine’s Field Service Department is to utilize its extensive experience and technical expertise in the maritime market to produce a client experience that is unrivaled in the marketplace. ...
-
Manufactured by Ballast Water Containers (BWC)based in UNITED KINGDOM
An ideal contingency plan: A port based single stage BWTS is an ideal contingency plan for vessels that have failed a port inspection of their onboard BWTS. This port system can be connected to the vessel’s ballast water system, allowing the vessel’s ballast water to be treated by the port system prior to discharge. This containerised BWTS can be located on the quayside or ...
-
Manufactured by ERMA FIRST ESK Engineering Solutions S.A.based in GREECE
IMO Circulars BWM.2/Circ.70 (BWM.2/Circ.70/Rev.1) provide guidance for the commissioning testing of ballast water management systems. The latter is part of the Amendment of the Ballast water Management of the Convention Resolution MEPC.325 (75) Amendments to Regulation E-1 and Appendix I of the International Convention for the Control and Management of Ship’s Ballast Water and Sediments, ...
-
based in USA
With the IMO Ballast Water Management Convention now ratified, a shortage of systems and design firms capable of facilitating compliance is almost inevitable. Tying up with a skilled and experienced retrofit partner is more critical than ever. Since 2010, Goltens Green Technologies’ has supported almost 900 ballast water treatment system retrofit projects making us the leader in this space. ...
-
by MEA-nlbased in NETHERLANDS
Water treatment systems often start with a bright idea. The silver bullet for all types of water is still not there. In our workshop and lab we can conduct bench-scale tests on components and complete installations, including filtration techniques, in mutual consultation. This enables you to make sure that every step has the desired effect. Finally, full-scale tests can be conducted on board our ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you