Belt Skimmers Equipment For Water And Wastewater Available In Connecticut
-
Manufactured by Abanaki Corporationbased in USA
The Abanaki Model MB Oil Grabber is a dependable and effective means of removing oil from water and water-base solutions. Often, skimming by itself will reduce oil to an acceptable level of water purity. Depending on the characteristics of the liquid, it is possible for the Model MB alone to reduce oil content to less than five parts per million in water. The unit can be used as a pretreatment ...
-
Manufactured by Abanaki Corporationbased in USA
The economical solution to remove unwanted oil in coolants & parts washers! Effective. Removes one (1' wide belt) gallon or more of medium weight oil per hour. Compact. Use it almost anywhere...even through a 2' dia. bunghole in a drum.. Portable. Use it here today, there tomorrow. Weights only 6 pounds, installs in seconds and runs on 110 v. power. Complete. Put it to work right out of the ...
-
Manufactured by Zebra Skimmers Corporationbased in USA
Steel, heavy-duty construction. Removable, easy-to-clean oil collection tray. Continuous-duty, fan-cooled motor. Self-tensioning belt on fixed lower pulley (to 24”). Hanging lower pulley design (36” and up). Dual wiper set with lifetime warranty. One year warranty all other parts (except steel belts). Accessories shown ...
-
Manufactured by Zebra Skimmers Corporationbased in USA
Install your skimmer in seconds!, Easiest way to transport your skimmer between machines or to drums, Mounts below mechanical skimmers, Fits easily on drums, pails, and sump walls of 1/4” or less, Shown here with Belt Skimmer w/Diverter, One year ...
-
Manufactured by 3nine ABbased in SWEDEN
The SLS oil skimmer gives you high separation of tramp oil and extends the lifetime of your cutting fluids. The technique exploits the viscosity differential between oil and cutting fluid, with the more viscous oil clinging to a rotating threaded device, from where it is separated ...
-
Manufactured by Veeraja Industriesbased in INDIA
Galvanising line filtration system has many functions. It has to remove the scale and scum generated during rolling. The temperature has to be controlled along with flow and pressure. ...
-
Manufactured by Qingdao Singreat Industry Technolog Co.,Ltdbased in CHINA
1.The inclined belt skimmer is mainly composed of the hydraulic power station, skimmer head (the main unit), the hydraulic oil hose, oil pipe and other parts. 2.The main unit of the skimmer can recovery the oil spill by pushing the oil spills into the water and then make it go through the oil collecting channel. One end of the inclined belt is above the water surface while another end is below ...
-
Manufactured by DESMI A/Sbased in DENMARK
The design of the DESMI TERMINATOR skimmer has benefited from a continuing development programme of more than 25 years. The resulting system is a very versatile, reliable, powerful and seaworthy oil skimming system that can be used in a wide variety of ...
-
Manufactured by DESMI A/Sbased in DENMARK
Many oil spills over recent years have highlighted the problems of recovering very viscous oils at sea. To respond to this challenge DESMI Ro-Clean has developed a line of belt ...
-
Manufactured by Potential Engineeringbased in INDIA
API oil water separator is a gravity-based separation system. It is designed as per API 421using Stokes’s Law. The specific gravity difference leads to the settlement of heavier solids at the bottom of the separator. Oil rises to form the top layer; heavy suspended particles from the bottom layer and the middle layer are formed by water. The top oil layer is skimmed off using a chain scraper ...
-
Manufactured by Abanaki Corporationbased in USA
The Abanaki Grease Grabber is a dependable and effective means of skimming oil and floating grease from water, under the most demanding conditions. The Grease Grabber makes use of the differences in specific gravity and surface tension between oil and water. These physical characteristics allow the skimmer belt to attract grease, oil, and other hydrocarbon liquids as the belt passes through the ...
-
Manufactured by Abanaki Corporationbased in USA
The Abanaki Model 8 Oil Grabber is a dependable and effective means of removing oil from water and water-base solutions. Often, oil skimmers alone will reduce oil to an acceptable level of water purity. Depending on the characteristics of the liquid, it is possible for the Model 8 alone to reduce oil content to less than five parts per million in water. The unit can be used as a pretreatment ...
-
Manufactured by Environmental Compliance Equipment (ECE)based in USA
600 Gallon Batch Treatment capacity up to 1200 GPH, fully automated process. Stainless Steel construction, powder and ceramic coating. 250 pound ClearFloc hopper with flexible auger dosing. Filter Tray shown with Sludge Press De-watering ...
-
Manufactured by SkimOil, LLCbased in USA
Belt skimmers lift and remove unwanted floating oils from the surface of water or coolants, in parts washers, pressure spray operations, oil leakage pits, wastewater, and treatment tanks, pits, sumps and wells. These require no pumps. These are selective and give you almost oil only with very little water to deal with. The Belt skimmers (TBS) are workhorses for smaller oil skimming needs and ...
-
Manufactured by Wayne Products, Inc.based in USA
Cogged belt oil skimmers are the industry standard coolant skimmer since Mini-Skimmer debuted the cogged belt in 1989. Check out our best sellers below – the perfect coolant skimmer for any CNC machine sump. If you’re looking for something slightly smaller, check out our Mini-Skimmer R.S. model – our smallest oil skimmer, perfect for intermittent ...
-
Manufactured by Friess GmbHbased in GERMANY
Our Skimmer for standard containers in a small and narrow format. Specifically designed for the removal of floating oils from small and narrow ...
-
Manufactured by Mohr Separations Research, Inc. (MSR)based in USA
MSR machine tool coolant recovery system tramp oil separator leads the industry. Coolant recovery coalescing filter separator systems efficiently separate tramp oil droplets from coolant to purify the coolant and increase coolant life. We design our coolant tramp oil water separators to fit the needs of any size system or systems. Save with Increased Coolant Life: Good tramp oil removal increases ...
-
Manufactured by Wastewater Engineers, Inc.based in USA
Streams that have a large amount of suspended solids often need to have those solids removed before treatment. A model ST-Tank is specifically designed to collect fluids and allow retention time for solids to settle. A solids filtration unit is designed to reside below the tank to collect the solids for disposal. The ST-Tanks have a 45 angle, and are available in several sizes in steel. Optional ...
-
Manufactured by Schnell Teknikbased in DENMARK
Professional oil skimmer for fast and efficient tramp oil removal. Max. temperature 40ºC. Easy installation and belt ...
-
Manufactured by Wayne Products, Inc.based in USA
Our MINI-SKIMMERS with flat polyurethane belts are for the economy-minded – a perfect alternative for customers with tight budgets. These Oil Skimmers have the same durable motor with a less expensive belt and can be used for various applications, including coolant ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you