Only show results available in Connecticut? Ok

Bilge Monitoring equipment for Water and Wastewater

  • Premium

    TDHI - Model TD-107 - Oil Content Monitor

    The TD-107 Oil Content Monitor is the most reliable way to to measure oil content in a typical ship’s oily waste holding tank, bilge, or oily water separator.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • DECKMA - Bilge Alarm

    DECKMA is a global leader in bilge effluent monitoring. DECKMA was one of the first manufacturers to receive IMO resolution MEPC.107(49) approval for their OMD-2005 Bilge Alarm. Today DECKMA supplies to Bilge Separator manufacturers the newer version OMD-24, and for retrofitting of existing installations the OMD-24 and 2008. All systems are ...

    By Hermont Marine Inc. & Hermont Tech based in St Laurent, QUEBEC (CANADA). from Pollution Abatement Product line

  • JOWA - Model DPS - Discharge Protection System

    JOWA Discharge Protection System, DPS, has the advantage to monitor and control the discharge of Bilge water to prevent any accidental oil discharge. All data is logged and stored for later printout or down load. This gives the operator full control over the discharge. The DPS is available as a add on option to the JOWA 3SEP 15ppm bilge water ...

    By JOWA based in Kållered, SWEDEN. from Monitoring and Control Systems Product line

  • Model 15 ppm - Bilge Alarm Type BilgMon 488TM

    Petrik Naval has engineers to carry out the annual and 5th annual calibration, certification and verification, also troubleshooting and repair of Oily Water  Separator 15ppm Bilge Alarm Monitors. According to the new MEPC 107(49) compliant monitors, and the old MEPC 60(33) compliant monitors. Bilge Alarms for  the marine market, are ...

    By Petrik Naval based in PI Palmones, SPAIN.

  • Wema - Model OVG-S - Bilge Alarm Switch

    Material: SUS 316 Stainless Steel. Length: Standard length is 4'. Use: This device is for detecting water level at the bottom of your boat. When water comes up to alarm leve, the buzzer wil sound. The housing, which can be conveniently disassembled and cleaned, can prevent foreign particles from obstructing the movement of the float.

    By KUS USA, INC based in Fort Lauderdale, FLORIDA (USA). from Switches Product line

  • RWO - Bilge Separator

    The SKIT/S-DEB Bilge separator complies with IMO Resolution MEPC.107(49). The Skit/S-DEB combines the efficient open porous coalescer with a second stage emulsion breaking oil and hydrocarbon polisher to achieve consistent and reliable performance. Periodic back flushing assures coalescer efficacy for long lasting, maintenance free operation.

    By Hermont Marine Inc. & Hermont Tech based in St Laurent, QUEBEC (CANADA). from Pollution Abatement Product line

  • JOWA - Model SeaGuard - 15ppm Bilge Alarm

    The JOWA SEAGUARD 15ppm Bilge alarm is designed to monitor the effluent from a bilge water separator. The alarm is approved to IMO MEPC 107(49).

    By JOWA based in Kållered, SWEDEN. from Monitoring and Control Systems Product line

  • Bilge - Model YWC - Water Separator

    This device can be used to treat oily bilge water in order to make it reach the requirements of IMO.MEPC.107 (49) resolution, which is also called 15ppm bilge separator. It contains type approved 15ppm bilge water separator,15ppm bilge alarm and automatic shut down Device.

  • Mutao - Model YWC - Marine Oily Water Separator

    This device can be used to treat oily bilge water in order to make it reach the requirements of IMO.MEPC.107 (49) resolution, which is also called 15ppm bilge separator. It contains type approved 15ppm bilge water separator,15ppm bilge alarm and automatic shut down Device.

  • Bilge Alaram

    Bilge Alarms for the marine market, are designed to measure the oil content in contaminated bilge water, in accordance with the MARPOL regulations. The 15 ppm Bilge Alarm type BilgMon 488TM, is designed to meet and is certified in accordance with the new IMO resolution MEPC.107(49). The oil content is often measured by the use of scattered ...

    By OTS Group Ltd based in Sandefjord, NORWAY.

  • Model MEPC 107 (49) - Smart Cell Bilge Alarm - Simultaneously Monitor

    IMO Resolution MEPC 107 (49) came into effect on 1st January 2005 and applies to all new installations of oil content monitors within engine room spaces. This applies to existing ships and ships whose keel was laid on or after 1st January 2005. The Rivertrace Smart-Cell Bilge Alarm meets the requirements of MEPC 107 (49) for the monitoring of ...

    By Rivertrace Engineering Ltd based in Redhill, UNITED KINGDOM. from Marine Applications Product line

  • SmartSafe - Bilge Overboard Security Systems

    By enabling the cost-effective prevention of illegal discharge to sea, the SmartSafe enables the operator to demonstrate MARPOL Compliance. Easy to install and requiring low maintenance, the system is capable of recording other miscellaneous ships data and generating shore-based event reports. SmartSafe is compatible with all IMO Resolutions MEPC ...

    By Rivertrace Engineering Ltd based in Redhill, UNITED KINGDOM. from Marine Applications Product line

  • Deckma OMD-21 - Oil Water Monitor - 15ppm Bilge Alarm

    The OMD-21 Bilge Alarm Monitor was designed by Deckma Hamburg GmbH for use in conjunction with 15 ppm Oily Water Separator Systems. The performance and specifications of the OMD-21 comply with the International Maritime Organization (IMO) requirements described in Resolution MEPC.60 (33).

    By Mackay Communication, Inc., dba Mackay Marine based in Raleigh, NORTH CAROLINA (USA).

  • Model OMD- 2008 Series - Bilge Alarm System

    5 ppm + 15 ppm Bilge Alarm according to IMO Resolution MEPC.107 (49)

    By Deckma Hamburg GmbH based in Hamburg, GERMANY.

  • Model TD-107 5.0 - 5 PPM Bilge Oil Content Monitor

    The TD-107 5.0 is the world's first and only DNV Clean Design Certified 5ppm Bilge Oil Content Monitor. The TD-107 5.0 is an extension of the highly successful TD-107 Oil Content Monitor for oily water separators, except with an added level of testing and certification for 5ppm applications by Det Norske Veritas' Clean Design program.

    By NAG Marine based in Norfolk, VIRGINIA (USA). from Oil Content Monitors Product line

  • Model TD-107 - 15 PPM Bilge Oil Content Monitor

    The TD-107 Fluorescence Oil Content Monitor (OCM) is a 15 ppm bilge alarm for oily water separators based on fluorescence detection technology. Fluorescence makes the TD-107 resistant to interferences by turbidity or particles and sediments in the bilge which impact competing 'light scatter' oil content monitors. Because silt, algae, iron oxide ...

    By NAG Marine based in Norfolk, VIRGINIA (USA). from Oil Content Monitors Product line

  • Brace & Leg Leak Detection System

    Our Brace & Leg Leak, Void Detection System System offers a continuous automatic monitoring of a vessel’s watertight integrity. High level redundancy along with SIL approved sensors combine to ensure a highly effective and reliable system. Leak Detection Sensors can be easily retro fitted into Braces, Bilge Pots or Void Spaces to monitor ...

    By Monitor Systems Scotland Limited based in Aberdeen, UNITED KINGDOM.

  • Model OMD- 24 Series - Bilge Alarm System

    The OMD-24 Bilge Alarm Unit has been designed specifically for use in conjunction with 15 ppm oil-water separator units and has a specification and performance which exceeds the requirements of the International Maritime Organization specifications for 15ppm Bilge Alarms contained in Resolution MEPC. 107 (49). The unit is supplied with 2 ...

    By Deckma Hamburg GmbH based in Hamburg, GERMANY.

  • JOWA - Model 3SEP OWS - Oily Water Separator

    The 3SEP OWS is a dual stage oily bilge water separation system utilizing differential specific gravity, coalescence plates and filtration to separate and remove free and emulsified oil. The unit is available in five different capacities; 0.5 m3/h, 1.0 m3/h, 2.5 m3/h, 5.0 m3/h and 10.0 m3/h. The skid is optimised so that the footprint of the 3SEP ...

    By JOWA based in Kållered, SWEDEN. from Equipment for treatment of oily water Product line

  • Model OMD- 32 Series - Oil-in-Water Monitor

    The OMD-32 Oil-in-Water Monitor has been designed specifically for use in conjunction with oil-water separator units. The OMD-32 has been constructed using technology of the DECKMA HAMBURG OMD series industrial instruments and 15ppm Bilge Alarm Monitors, that have a specification and performance which exceeds the requirements of the International ...

    By Deckma Hamburg GmbH based in Hamburg, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you