Biofouling Control Applications
-
Premium
Determination of benzene in gasoline
Introduction Benzene is formed in gasoline in the process of oil refining and gasoline production. Determination of benzene in gasoline is an important task, because ben zene and its products reacting with the products of incomplete combustion of gasoline are highly toxic. Moreover, the presence of benzene increases fouling that eventually may damage the engine . Therefore, regulations impose lim it on the content of benzene in gasoline in many countries, and international standards exist to come up to this ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
High Performance Separation System for Hydrotreating Industry
The key to optimizing a hydroprocessing unit is to maximize the life of the catalyst bed and increase energy efficiency of the furnaces. Our goal is to eliminate fouling of the catalyst bed by particles and aqueous fluids and the dissolved components within them as well as fouling of hydrogen recovery membranes and furnace-burner ...
By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).
-
High performance separation system for ethylene industry
Fundamental building block chemical used in the production chain of polyethylene, PVC, styrene, ethylene glycol, vinyl acetate, linear ∂-olefins and a host of other chemical products. Eliminate hydrocarbons in Quench Water system, minimize fouling, provide greater system reliability, lower maintenance, lower energy costs. Quench water contains emulsified heavy aromatic hydrocarbon (SG = 0.975). Cracked hydrocarbons are extremely reactive. Polymerization leads to fouling of quench system, exchangers, dilution ...
By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).
-
Membrane Water Treatment and Monitoring Products for Oil & Gas
Innovative solutions that improve corrosion prevention and drilling fluid management. Microbiologically Induced Corrosion (MIC) costs the oil and gas industry billions of dollars each ...
By Modern Water Inc. based in New Castle, DELAWARE (USA).
-
Microbial testing in upstream oil & gas industry
On-the-spot measurement of total microorganisms! Microbial growth can be a significant nuisance in the upstream oil and gas sector. Well drilling, completion and stimulation activities can introduce microbes into a producing formation. Microbes found in the near well bore of producing wells can impede inflow, corrode tubulars and pumps and sour the formation. At the surface, production problems associated with microbial infection include corrosion and fouling of wellheads, pipelines, heater treaters, separators ...
By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).
-
High performance filtration & separation system for amine
There are a number of factors that affect the capacity and operation of a typical amine system. Solid or liquid contaminants in the system may cause foaming. The presence of foaming is typically addressed by the addition of expensive antifoam chemicals and/or by reducing the operating capacity of the amine system. In addition to this, the presence of contaminants in the system can foul heat exchangers and column packing or trays. These solid and liquid contaminants are either ingressed into the system with the ...
By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).
-
High performance separation system for glycol dehydration
Glycol dehydration is a liquid desiccant system for the removal of water from natural gas and natural gas liquids (NGL). It is the most common and economic means of water removal from these streams.Glycols typically seen in industry include triethylene glycol (TEG), diethylene glycol (DEG), ethylene glycol (MEG), and tetraethylene glycol (TREG). TEG is the most commonly used glycol in ...
By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).
-
Chemical Detection Solutions for Oil and Gas Applications
A variety of amines can be found in oil and gas, both as constituents and as by-products of processes to remove H2S and/or CO2. Lonestar can detect the presence of amines in both crude oil and water backgrounds, allowing real-time monitoring of concentrations throughout the treatment ...
By Owlstone Inc. based in Westport, CONNECTICUT (USA).
-
Automatic Tube Cleaning System for Refining
Now there’s a simple solution for improving your refinery’s cooling process efficiency. Innovas Technologies offers our innovative Helios Tube Cleaning System technology that prevents fouling your process heat exchangers naturally and sustainably — without costly process shutdowns or chemical treatments. Whether it’s a process heat exchanger, SAGD produced water heat exchanger, extraction water preheater, vacuum condenser, or overheads condenser, our ball tube cleaning system technology ...
By Innovas Technologies LLC based in Coralville, IOWA (USA).
-
Water treatment in Refineries
Processing crude oil means dismantling it in its valuable elements with heat. In a distillation process the crude oil is heated up until it evaporates. By cooling it down step by step products like heating oil, diesel, gasoline and gases are extracted when their condensate temperature is reached. The function of Merus ring is not limited to the treatment of water, in the oil industry. We also offer special rings for the treatment of hydro carbons. For these cases please go to Merus Oil and ...
By Merus GmbH based in Sindelfingen, GERMANY.
-
Electrochlorination systems for Oil & Gas industry
Almost all industries including Oil & Gas industry, petrochemical industries, power plants, ( Coal-fired, Combined cycle, Nuclear power plants), steel mills, and cement industries, require water for cooling purposes. In such an environment many types of organisms, pathogens, and algae will grow in the circulating facility/equipment leading to micro-macro fouling reducing the cooling system efficiency, and eventually plant performance. Especially when the coolant is coming from seawater intake rather than ...
By ULTRANODE based in Ottawa, ONTARIO (CANADA).
-
High Pressure Cleaning System for Oil And Gas Infrastructure Industry
After immersion, oil and gas are structures are colonized by marine organisms (anemones, mussels, sponges, and algae) that grow on the structure itself (biofouling). With submerged structures that have been decades in the water, biofouling becomes a problem when decommissioning obsolete oil- and gas-structures (biofouling can make up to 10-12% of the weight of the structure being removed). Owners of oil and gas installations are required to discontinue their offshore infrastructure at the end of the field's ...
By Bravo Marine AS based in Haugesund, NORWAY.
-
water treatment for the oil and gas industry
DyVaR technology is highly flexible. A standard DyVaR system can handle any salt concentration and can produce any brine concentration, user adjusted to the local requirements or user specifications. DyVaR systems are insensitive to scaling and fouling even when salt concentrations widely fluctuate. DyVar's flexibility of operation allows for any water efficiency desired (up to and beyond 99%) while continuously producing stable fresh water qualities even with varying salt concentrations of brine feed water input. ...
By Salttech based in Sneek, NETHERLANDS.
-
Dynamic Aqueous Plasma Technology.for Oil & Gas Industry
The Oil & Gas industry in North America, driven by hydraulic fracturing (or fracking) technology and operations, is facing a water shortage and storage crisis that can shut down an operation as fast as a dry well. Fresh water is limited by transportation cost, municipal regulations, and drought. Regulatory pressures, driven by health concerns, have created a business environment where sealing reject water from extraction operations into deep wells has become a limited ...
By Symbios Technologies LLC. based in Fort Collins, COLORADO (USA).
-
Polymer traveling screens solutions for oil and gas/chemical industry
Reliable screens that last five times longer than steel. Eliminate corrosion, protect your downstream equipment from debris and aquatic life, meet all local regulations, and increase your workers’ safety. Our reliable screens last five times longer than steel screens and keep you up and running virtually maintenance free, eliminating dangerous and costly ...
By Hydrolox Engineered Polymer Screens based in Harahan, LOUISIANA (USA).
-
Non Biocide Fuel Treatment System for Oil Industry
The exhaustive compatibility testing provided the technology with an acceptance within the industry beyond what could have been expected of a ‘new’ invention. The compatibility testing protocols used were very similar to those currently required by the aero industry for aviation jet fuel. This testing is also applicable to the oil industry. During the early development of Aquasolve™ it was suggested by an established scientific figure that one of the reasons for the permanent dissolving of ...
By Coval Aquasolve Limited based in Earlsfield, UNITED KINGDOM.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you