oxygen flow controller Articles
-
Microbial characteristics of a CANON reactor during the start-up period seeding conventional activated sludge
An up-flow oxygen-controlled biofilm reactor filled with volcanic filter was used for a completely autotrophic nitrogen-removal over nitrite (CANON) process. The reactor was successfully established by seeding conventional activated sludge at ambient temperature without additional biomass inoculation. An average total nitrogen (TN) removal rate of 1.1 kg·(m3 d)−1 was achieved ...
-
Researchers create Martian environment - Case Study
The pressure on Mars is less than one percent of what it is on Earth. The research of the Controlled Environment System Research Facility (CESRF) at the University of Guelph in Ontario, Canada includes evaluation of plant growth under these low pressures. In their studies of biological life support for future space exploration, their experiments utilize eight closed-loop hypobaric chambers. ...
-
Industrial Sludge Treatment
Industrial Sludge Wastewater Treatment Industrial Sludge Treatment Facility Oxygen Mixing Injection Dissolved Oxygen Boosted with Liquid Oxygen to Improve Bacteriological Activity An industrial sludge treatment facility could not maintain the needed high level of dissolved oxygen in their treatment basin. Their process required a very short ...
-
Industrial Sludge Wastewater Treatment
Industrial Sludge Wastewater Treatment Industrial Sludge Treatment Facility Oxygen Mixing Injection Dissolved Oxygen Boosted with Liquid Oxygen to Improve Bacteriological Activity An industrial sludge treatment facility could not maintain the needed high level of dissolved oxygen in their treatment basin. Their process required a very short biological digestion period for their high BOD ...
-
Glass manufacturer controls gas ratios - Case Study
For a specialty glass manufacturer that constructs high-quality glass containers for the pharmaceutical and analytical industry, manual control of air and natural gas flow to the burner tip had resulted in unacceptable levels of rejected material, as well as excessive gas consumption. The process engineers were seeking methods to improve glass quality, reduce raw material waste, and increase ...
-
Why Mass Flow Controllers are Replacing VA Meters in Bioreactors
Upgrading to A Gas Mass Flow Controller Provides Greater Reliability for your Bioreactor When it comes to efficient bioreactor performance, precision mass flow control gas is critical. It is essential that bioreactor manufacturers have reliable, repeatable, and flexible gas supply systems for their bioreactors. Due to the ever-evolving demands and critical and complex nature in the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you