Biological Water Treatment Applications in Canada
-
Premium
Hand-Held & Process Control Water Testing Instrument for Environmental Industry
Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation's waterways. Today, in many ...
By Myron L Company Distributor in Burnaby, BRITISH COLUMBIA (CANADA).
-
Solutions for the wastewater sector
Conventional wastewater treatment systems are focused on efficient removal of polluting components. This is commonly done through aeration and separation of formed biomass from the cleaned water. After treatment the water would be discharged onto surface waters or subsoil irrigation. Introduction of polishing steps after these treatment systems opened up the possibilities to reuse water for either irrigation or even potable water. DMT Environmental Technology also implements these solutions with its MemBioRex ...
By DMT Environmental Technology BV Office in Blainville, QUEBEC (CANADA).
-
Liquid/solid separation equipment for remediation pollution treatment
Landfills are categorized by regulations in three types: industrial, municipal, and hazardous. Individual landfills may be further differentiated by the types of waste which they accept. All landfills are required to be capped, usually occurring at the end of each day. The cap is typically 6-8” of soil. The cap reduces odor and loss due to wind. At the closing of the landfill, a permanent cap consisting of a membrane and more soil is added. Before the landfilling operation begins, an ...
By WesTech Engineering, LLC Distributor in , ONTARIO (CANADA).
-
Municipal wastewater solutions for biological treatment industry
A well-designed wastewater plant starts with your effluent requirements and an energy-efficient biological process. WesTech has multiple biological process options to match your application and preference. From trickling filters to oxidation ditches, WesTech's biological process equipment will give you the effluent quality you need and the foundation for a successful wastewater ...
By WesTech Engineering, LLC Distributor in , ONTARIO (CANADA).
-
Ultrasonic instrumentation for sequential batch reactors applications
In these industrial processes, settlement tanks need monitoring. Pulsar Measurement provide instrumentation that is able to monitor and control Sequential Batch Reactors using the Sludge Finder 2 product. ...
By Pulsar Measurement Office in Long Sault, ONTARIO (CANADA).
-
BOD and COD Removal
Hydrogen peroxide (H2O2) has been used to reduce the BOD and COD of industrial wastewaters for many years. While the cost of removing BOD / COD through chemical oxidation with hydrogen peroxide is typically greater than that through physical or biological means, there are nonetheless specific situations which justify the use of hydrogen peroxide. These include: Predigestion of wastewaters which contain moderate to high levels of compounds that are toxic, inhibitory, or recalcitrant to biological treatment (e.g., ...
By USP Technologies Office in London, ONTARIO (CANADA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you