Sludge Aerator (Biological Water Treatment) Equipment Available In Paraguay
-
Manufactured by Cloacina LLCbased in USA
Cloacina’s DRYPAC Aerated Sludge Handling System processes Waste Activated Sludge (WAS) from a variety of treatment plants: sequencing batch reactors, extended aeration, solids contact and membrane bioreactors. Cloacina’s DRYPAC™ system allows clients to request the standard volute dewatering press or choose ...
-
Manufactured by Aquarius Technologies, LLCbased in USA
prevents back flow during intermittent operation. EPDM standard disc diffusers are ideal for activated sludge aeration, swing zones in biological nutrient removal applications, and mixing ...
-
Manufactured by Lian Tadbir Engineering Companybased in IRAN
The Moving Bed Biofilm Reactor process was developed in the late 1980s. This process is used to remove organics, nitrification and denitrification. The MBBR system consists of an activated sludge aeration system in which the sludge is recycled and collected in plastic carriers. These carriers with a large internal surface are optimized for ...
-
Manufactured by BIOGEST AGbased in GERMANY
With the objective of providing a reliable clearwater decanting in SBR-wastewater treatment plants and batch reactors BIOGEST AG developed the CROWN-decanting system. This decanting system is characterized by a nearly energy-free decanting process without the discharge of floating and aerated ...
-
Manufactured by AXG Membrane, S.L.based in SPAIN
Biological treatment system with filtration, simplifying the activated sludge process with the same operating philosophy, but with fewer processes involved: aeration, mixing, sludge recirculation and purge. No settling needed and effluent is tertiary quality to reuse. In this case main bioreactor is an aerated tank in civil ...
-
Manufactured by WEHRLEbased in GERMANY
, energy efficient. Economic operation is assured, even with low membrane lifetimes, as a result of low areas of installed membranes.With such high concentrations of activated sludge, conventional aeration systems may prove inadequate in providing the necessary oxygen for the biomass to treat the wastewater. This problem can be solved by ...
-
Manufactured by SISMAT ULUSLARARASI LTD. STI.based in TURKEY
Biopak, a package type biological treatment unit, is a fixed bed, long aeration, active sludge system used for municipal wastewater treatment. Entirely a product of Sismat's know-how, it does not require any pre-equalization and is not affected by any hydraulic changes. It is an efficient, tested system that provides odorless and clear ...
-
Manufactured by Lian Tadbir Engineering Companybased in IRAN
the reaction type, oxygen is added by an aeration system. During this phase, bacteria oxidize the organic matter just as in activated sludge systems. Thereafter, aeration is stopped to allow the sludge to settle. In the next step, the water and the sludge are separated by decantation and the clear layer ...
-
based in NETHERLANDS
The conventional activated sludge system comprises an aeration tank and a clarifier. Aerobic biomass degrades COD in the aeration tank. The mixed liquor (ML) in the clarifier is separated into a water phase and a concentrated ML by sedimentation. The clarified water overflows weirs at the top of the clarifier whereas the sludge ...
-
Manufactured by System S&P GmbHbased in GERMANY
compact and settles faster than sludge from classic aeration systems, making lamella separators the ideal solution. They are designed for highly effective sedimentation, which also results in an extremely compact construction, requiring only around 20% of the surface area needed for a conventional secondary sedimentation ...
-
Manufactured by Process & Control Technologies, Inc.based in UNITED ARAB EMIRATES
Normal biological water treatment is done traditionally by suspended growth mode (e.g. activated sludge and extended aeration process) or attached growth mode (tricking filter rotating biological conductors). The technology adopted in MBBR is combination of both which works on higher MLSS concentration in MBBR systems fast bio-reactions take ...
-
Manufactured by Newterra, Ltd.based in CANADA
Simple, nearly maintenance free above surface mixing. The Aire-O2 Mixer ensures simple, nearly maintenance free operation with above surface float or fixed mounting options. The variable angle mixer performs in corrosive environments with no gear box and low power consumption in aeration tanks, oxidation ovals, digesters, lagoons, anoxic ...
-
Manufactured by Raschig USA Inc.based in USA
Modular media consisting of extruded HDPE. tubes which are heat welded into rugged blocks. Vertical tube orientation resists plugging of biomass. Improved treatment efficiency due to. 3-dimensional openness of media which. promotes complete mixing within the ...
-
Manufactured by Beckart Environmental, Inc.based in USA
Beckart designs focus on suspended growth aerobic biological treatment for industrial applications. These systems effectively reduce BOD, COD, and a wide range of dissolved organic matter with applications in the food, textile, paper, and other ...
-
Manufactured by B&P Water Technologies s.r.l.based in ITALY
Our packaged units for sewage water treatment are based on the traditional activated sludge process with extended aeration or on the newest and "state of the art" technology of membrane bioreactor (the so called MBR). The packaged activated sludge biological treatment plant represents the best solution for single users or small ...
-
Manufactured by WILO GVA GmbHbased in GERMANY
The ELASTOX -T disk air diffuser was developed in 1984 for micro-bubble compressed air ...
-
Manufactured by ATB Water GmbHbased in GERMANY
ATB-HBA submersible aerators suck in ambient air without fan support and distribute it fine-bubble 360° around the ...
-
Manufactured by Aqua-Aerobic Systems, Inc. - a subsidiary of the METAWATER Groupbased in USA
24 inch (61 cm) length, 304 L or 316 L stainless steel, open or closed bottom. Airflow Range: From 5.0 to 50 SCFM (8.5 to 85 m3/hr) per diffuser. Performance: Standard oxygen transfer efficiency of approximately 1.0% per foot of submergence. Diffuser performance is calculated for each specific application based on flux, density, depth and several other parameters. Please contact an ...
-
Manufactured by Hydroflux Industrialbased in AUSTRALIA
Hydroflux HySmart® Sequencing Batch Reactor. SBR’s are renowned as being one of the most robust and reliable biological systems available for Industrial wastewater treatment ...
-
based in USA
MicroSolv 600L is a high potency, bacteria-laden, liquid formulation containing aerobic and facultative bacteria, which help facilitate the nitrification/denitrification process under certain conditions that may occur in wastewater situations. MicroSolv 600L is a selectively chosen product of Nitrobacter spp. and Nitrosomonas spp. naturally occurring bacteria which are indigenous to soil, stream, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you