Blowdown Water Equipment For Water And Wastewater Available In Nova Scotia
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
In paint booth systems, different body and spare parts from automotive, appliance, electronics, plastics and other industries are coated by using one or multiple layers of paints. The main goal of the paint booth treatment is to remove as much overspray paint as possible for successful operations. Our Kuristuck technology meets this requirement by removing the overspray as dry sludge and it goes ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
ZLS is an alternative produced water treatment process promoted by Eco-Tec for SAGD (Steam Assisted Gravity Drainage) boiler feed water in the production of heavy oil, most typically in Western Canada. The process eliminates the need for the traditional practice of lime softening and its associated costs, large site footprint and operational challenges as a part the treatment process. Technical ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME Automatic Scraper Strainer has been designed to remove solids from 150mm in size down to 75-micron particles. The general literature piece describes the various connection options available as well as the advantages of a scraper strainer over a backwash strainer. These strainers are available with connections from 1″ up to 48″ in fabricated carbon steel, stainless steel, and ...
-
Manufactured by Organomation Manufacturing, Inc.based in USA
Our 34 position nitrogen blowdown evaporator (cat# 11634) offers a large number of sample positions, without compromising any of the classic N-EVAP features. This time-tested, durable system provides one of the least expensive prices per position of all our N-EVAPs. The evaporative system, along with the standard flow control and pressure reducing regulator, enables the operator to achieve the ...
-
Manufactured by Organomation Manufacturing, Inc.based in USA
The 24 position N-EVAP is our most adaptable nitrogen blowdown evaporator. The basic model (cat# 11250) offers all of the standard features from our N-EVAP line. Additionally, the 24 position N-EVAP offers the most customizable options for your sample preparation needs. The standard sample holder can accommodate samples with an outside diameter of 10-30 mm. However, with the optional 8 position ...
-
Manufactured by Powertherm Maxim A Miratech Companybased in USA
The M11 is engineered for light industrial areas where background noise is relatively high and constant. The need for higher degrees of silencing should be minimal, keeps engine exhaust noise within existing levels. Typical application: Internal combustion engine exhausts in light industry areas with relatively constant background ...
-
Manufactured by Bionomic Industries Incbased in USA
The CycloPlus collector is an advanced cyclone design that offers high retained solid particulate collection as either a primary particulate device for dust removal or recovery or to act as a precleaning stage to reduce particulate loadings ahead of a fabric filter collector to increase fabric filter life, or wet scrubber and reduce scrubbing liquid blowdown. CycloPlus features a proprietary ...
-
Manufactured by Groth Corporationbased in USA
The Groth Model 1500 Air Operated Pressure/Vacuum Relief Valve is used to replace weight-loaded, spring-loaded, and pilot-operated valves in severe applications where polymerization and crystallization may take place and plug as well as corrode the control orifices. The air-operated valve increases valve efficiency and reduces evaporation losses. The pressure switch coupled with a solenoid ...
-
Manufactured by DSP-Systemsbased in NETHERLANDS
These concentrators are compact and practical benchtop systems using a combination of centrifugal force, vacuum and heat to concentrate small sample volumes. Different types of rotors are available to simultaneously concentrate multiple sample volumes varying from 2 – ...
-
Manufactured by Madden Engineered Products LLCbased in USA
The Madden Orifice Meter gives the boiler operator precise repeatable control of the continuous blowdown flow rate. This boiler blowdown valve utilizes 17 different hole sizes which are drilled in the stainless steel orifice plate. Each hole is precision drilled to a diameter that will produce the flow shown on the flow chart, see pages 3 and 4. By selecting a larger hole the continuous blowdown ...
-
Manufactured by Shanghai Valve Factory (SVF) Co. Ltdbased in CHINA
Compact structure, beautiful appearance, precision casting, and smooth surface. Split type is adopted for valve seat and valve body to facilitate assembly/disassembly and maintenance. Reasonably designed disc holder and adjusting ring make the safety valve open rapidly and reseat timely; the valve seat and valve clack are coated with hard alloy by build-up welding to achieve good wear and erosion ...
-
Manufactured by AMSA, Inc.based in USA
AMSA, Inc. sells Dow Sump Buddy DBNPA tablets as a complement to our DTEA II™; products and as a service to our customers. This solid, water-soluble formulation releases DBNPA biocide at a slow rate as it dissolves in water. It has all the biocidal performance expected of the DBNPA liquid formulation, that is, a highly effective quick kill and subsequent rapid ...
-
Manufactured by Axxiom Manufacturing, Inc.based in USA
Normally closed, fail-safe valves and controls. High flow auto air valves standard for maximum productivity. Standard 1600 cfm moisture separator for consistent abrasive flow. Available as stationary or mounted on highway and yard trailers. Skid and Fork Pocket Skid options. Standard 150 psi ASME code pressure vessel. 12” x 16” manway. Optional bag rack with pipe stubs for abrasive ...
-
Manufactured by Inwet S.Abased in POLAND
Our solution for bulk materials stored in silos and other reinforced concrete tanks bases on aeration method using systems of air blasters. Usage of this technology significantly reduces the occurrence of sediments on the tank and silos walls. Usage of these air blasters increases the useful volume of the tank and ensures constant flow of technological process preventing sediments on silo walls. ...
-
Manufactured by Spirax Sarco Inc.based in USA
Used to accommodate the blowdown water from the boiler(s). Designed, built & inspected to PD 5500. Supplied with full manufacturing data dossier. Strictly compliant with UK Health & Safety Executive Guidance Note ...
-
Manufactured by Lakewood Instruments, LLCbased in USA
The NexSys control system is the latest in a long line of reliable, easy to use controllers from Lakewood Instruments. The NexSys™ control system uses the latest in microprocessor technology with a 5.7" Color Touch Screen interface for a high level of application flexibility. ...
-
Manufactured by AST S.p.A.based in ITALY
AST type SMFN-7000 and SMF-7000 are spring loaded safety relief valves designed to guarantee reliable and high quality overpressure protection for air, gas, steam, vapor, liquid and two phase applications. AST type SMFN-7000 and SMF-7000 spring loaded safety valves offer simple and reliable design that guarantees optimum maintenance life cycle costs. Their versatile design includes screwed or ...
-
Manufactured by Hebei YUBO Filtration Equipment Co.,Ltd.based in CHINA
Self-Cleaning Filter Housing for High Viscosity Liquid Filtration This series self-cleaning filter is a new scraper self-cleaning filter composed of a motor reducer, filter case, filter screen, wiper combined cleaning system, PLC controller, and electric blowdown valve which can automatically remove the particle impurities on the inner surface of the filter screen by mechanical scraping and can ...
-
Manufactured by WeldFitbased in USA
WeldFit’s ReCAP® Emissions Recovery System is a pipeline depressurization and gas recovery solution that does one simple, yet important, thing in support of your ESG-driven methane emissions reduction goals: It eliminates the need for voluntary natural gas flaring or venting associated with blowdowns during common pipeline operations. With ReCAP®, pipeline operators can safely and ...
-
Manufactured by Electro-Chemical Devices (ECD)based in USA
The Model 61 Automatic Boiler Blowdown Control System from ECD provides a reliable solution for the continuous control of the surface blowdown rate for commercial and industrial boilers. All system components, except the sample system, can be supplied in carbon steel, NEMA 4 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you