chemical oxygen demand test Equipment

11 Results found
Only show results available in Virginia?
OK
  • Category: Water & Wastewater ×

  • Subcategory: BOD & COD ×

  • Keyword: chemical oxygen demand test ×

Accu-TEST - Model COD - Chemical Oxygen Demand Testing System

by Bioscience, Inc.     based in Allentown, PENNSYLVANIA (USA)

The EPA-accepted Accu-TEST COD System from Bioscience, Inc., makes determination of chemical oxygen demand (COD) as easy as 1-2-3. With the Accu-TEST COD System, testing is fast, inexpensive and simple. To determine wastewater strength, simply: Add a wastewater sample to a high-quality glass reagent tube. Digest the sample and reagent for two ...

CHEMetrics - Chemical Oxygen Demand (COD) Photometric Testing System

by Galgo (UK) Limited     based in Berkhamsted, UNITED KINGDOM

The determination of Chemical Oxygen Demand (COD) is widely used in municipal and industrial laboratories to measure the overall level of organic contamination in waste water. The contamination level is determined by measuring the amount of oxidant required to oxidize the organic matter in the sample. This is equivalent to amount of oxygen that ...

Skalar - Model SP2000 ST-COD - Chemical Oxygen Demand (COD) Analyzers

by Skalar Analytical BV     based in Breda, NETHERLANDS

Chemical Oxygen Demand (COD) analysis is commonly used to determine the amount of organic pollutants found in surface water and waste water. The COD value is a useful indicator for measuring the water quality. Skalar's SP2000 analyzers can be configured to automate  COD according to the sealed tube (ST-COD) method ISO 15705 and EPA 410.4 or ...

Tubetests - Model COD - Reagents Including Chemical Oxygen Demand

by Palintest Ltd - a Halma Company     based in Gateshead, UNITED KINGDOM

For ultimate convenience, the Palintest range of Tubetests offers pre-dispensed reagents for minimal handling and ease-of-use. For applications such as Chemical Oxygen Demand (COD), nutrients (ammonia, nitrate and phosphate) and heavy metals (chrome, copper, iron, nickel and zinc) the Tubetests range provides the solution – literally.

Chemical Oxygen Demand (COD) Analysis

by Aqua Diagnostic     based in South Melbourne, AUSTRALIA

Treatment Plant Optimisation With increasing costs for power and effluent discharge, process optimisation through real time, accurate monitoring of COD levels at key points throughout the treatment plant is a necessity. The PeCOD™ COD range of analysers will provide critical monitoring information to optimize secondary treatment aeration ...

SURCIS - Model BM-EVO - Multi‐purpose Respirometer

by SURCIS, S.L.     based in Barcelona, SPAIN

BM-EVO is an advanced system of respirometry equipped with a programmable settings board for the atomatic control of the temperatura and dissolved oxygen, allowing tests to be adapted to the actual conditions of the process and change them if necessary.

Model ECO 6 - COD Analysis Thermoreactors

by VELP Scientifica srl     based in Usmate (MB), ITALY

6-position thermoreactor for Chemical Oxygen Demand (COD) with settable temperature (up to 200 °C) and operating time (up to 199 minutes).

SURCIS - Model BM-Advance - Multi-purpose Respirometer

by SURCIS, S.L.     based in Barcelona, SPAIN

Within the BM respirometer series, besides to be equipped with a programable and automatic system for temperature and dissolved oxygen control, it is distinguished from the rest by also being equipped with a programmable system of pH control. Bm-Respirometer Specially Developed For Practical  And Efficient Biological Wastewater Treatment ...

Hach Lange - COD (HR) Pocket Colorimeter II for use with LCK014/ 114

by DelAgua Group     based in Marlborough, UNITED KINGDOM

The Portable Colorimeter from Hach Lange is programmed for the determination of Chemical Oxygen Demand (COD), high range, with cuvette tests. In carrying case, with batteries and operating instructions. The following cuvette tests can be evaluated with this pocket colorimeter LCK114 and LCK014.

Model HB - 016 - Hydrolyzing Package

by INGOS Ltd.     based in Praha 4, CZECH REPUBLIC

Hydrolyzing block HB016 is intended for the performance of sample hydrolysis or for the preparation of samples to be tested through the COD method (Chemical Oxygen Demand) at the set temperature. The block core is made of duralumin and the heating body and the temperature sensors are situated at the bottom part of the core. HB016 has been ...

SURCIS - Model BM-T+ - Multi-purpose Respirometer

by SURCIS, S.L.     based in Barcelona, SPAIN

BM-T + is an updated version of the old BM-T where the powerful BM software has been implemented. It is equipped with an external unit for the temperature control and maintains its character of easily transportable through their padded cases. Respirometers are laboratory analyzers specially developed, for practical and efficient biological ...

Related Terms for chemical oxygen demand test

Need help finding the right suppliers?

Let the XPRTs do the work for you