Booster Pumps Downloads

  • Premium

    106 / 206-BPC Operations Guide

    Model 106/206-BPC is designed for installation on t he discharge side of booster pumps to prevent starting and stopping surges. Main Valve (1) is a single seated, double chambered, hydraulically operated globe or angle pattern valve with a built-in check valve. Unless otherwise specified, 106/206-BPC is assemble d for service temperatures to 140 deg. F (60 deg. ...


    By Singer Valve Inc.

  • Premium

    SPC Panel Operations Guide

    SINGER Booster Pump Control Valves are designed for installation on the discharge side of pumps, to prevent starting and stopping surges in normal operation. The SINGER pre - wired electronic control panel provides the logic and supervision to coordinate the pump motor starter and the control valve in the correct ...


    By Singer Valve Inc.

  • Premium

    Models 106-BPC / 206-BPC - Booster Pump Control Valve – Double Chamber Brochure

    The 106-BPC and 206-BPC booster pump control valves are installed in-line, directly downstream of the pump discharge. The pump control valve is normally closed and on pump start-up, a pilot solenoid is energized to open the valve, at a rate governed by the opening speed control. When shut-down is required the pilot solenoid on the valve is de-energized to commence closing. The pump is kept ...


    By Singer Valve Inc.

  • Premium

    Models 106-PG-BPC / 206-PG-BPC - Booster Pump Control Valve – Single Chamber Brochure

    The 106-PG-BPC or 206-PG-BPC booster pump control valve is installed in-line directly downstream of the pump discharge. The valve is normally closed, and, on pump start-up, a pilot solenoid is energized to slowly open the valve, at a rate governed by the opening speed control. The pipeline flow is gradually increased. When shut-down is required, the pilot solenoid is de-energized to close the ...


    By Singer Valve Inc.

  • PureT - Model RO5-50-WP - Five-Stage RO System Brochure

    The premium PureT five-stage RO system with a 50GPD membrane and a booster pump features NSF-certified, double-seal filter housings and quick-connect fittings. The newly upgraded standard RO system now offers a more advanced system completely concealed within the unit for a sleek outer ...


    By Pureteck Co., Inc.

  • Booster Pumps - For In-line and Tank Applications - Brochure

    EPG Booster Pumps are suitable for use in recirculation systems, with storage tanks, and other applications where the transfer of leachate, contaminated water, or gas condensate demands that extra “boost”. The design of the EPG Booster Pump is sourced from the same innovative and proven engineering and manufacturing processes that have made our SurePump™ series of pumps an ...


    By EPG Companies Inc.

  • Centrimax - Model 2 - Booster Systems Brochure

    Booster systems composed of 2 or 3 centrifugal normalized pumps according to EN733 controlled by electronic device or by ...


    By Idroelettrica S.p.a.

  • EDGE - Edge End Gun Booster Pumps Brochure

    Cornell’s EDGE End Gun Booster pump for Center Irrigation Pivots are designed as a retrofit for pivot systems. The competitively-priced 3HP and 5HP End Gun Booster pumps feature Cornell’s legendary design and reliability and are typically available to ship ...


    By Cornell Pump Company

  • Booster Tank Brochure

    Hydro Systems‘ Booster Tank is a new and economical solution for low or inconsistent water pressure situations. The Booster Tank can be utilized wherever water is relied upon to mix or deliver ...

  • Pressure Booster Pumps Brochure

    Aquatec’s original product, and still the global standard in booster pump technology, providing reliable inlet pressure for efficient membrane utilization. Most models are designed for intermittent duty, although some models are rated for continuous operation.  Effective for recirculation based applications as well. They are ideally suited to work with hydro-pneumatic storage systems ...


    By Aquatec International, Inc.

  • FlashRES - Power Booster Brochure

    3,000W output power in 2 adjustable voltage ranges ( 400V/7.5A, 1,200V/2.5A), the FlashRES booster transmitter is particular useful for surveys at high resistive areas or IP surveys. When the FlashRES booster transmitter is connected FlashRES-UNIVERSAL, for each current injection, the system could collect 61 voltage measurement, this greatly increases the data collection speed. Uses two standard ...

  • Model Alti-Nexis Advens - High-Efficiency Booster Pump - Brochure

    High Performance Booster Pumps range of booster pumps fitted with multi-stage stainless steel Nexis Advens pumps with built-in electronic speed controllers: Collective and industrial uses 2 poles - 50/60 ...


    By Salmson

  • Liquidyne - 2-Stage Pump Seals Brochure

    The Liquidyne 2-Stage seals the pump and uses the (cooling) water from the pump to lubricate and cool the seal. This water flow also enables the Condition Monitoring feature. Are you pumping relatively clean (cooling) water? For up to 40 bar pressure and abrasive particles up to 100 micron, the Liquidyne 2-Stage (cooling) waterpump seal is the ideal solution. This Liquidyne pump shaft seal is ...


    By Lagersmit

  • CMC-PV1200 - Brochure

    For many years California Motor Controls has been producing touch screen pump controllers for the three largest water/wastewater pump applications - Level control, Pressure Booster control, and Well Pump control. In the past, these controllers have always been separate products, making continuous software development ...

  • Liquidyne - Model WA - 2-Stage Pump Seals Brochure

    The Liquidyne 3-Stage is a seal made of bronze houseparts, this seal is mostly used in the water management and industry market. The seal is also available with houseparts made of (stainless) steel , this is the Liquidyne 3-Stage WA version. The Liquidyne 3-Stage WA is especially designed for the dredging market. The Liquidyne 3-Stage (WA) pump seal is used in pumps that process water ...


    By Lagersmit

  • Booster Sets Brochure

    Booster sets are mainly used to supply and boost water in variable conditions such as intermittent and full demand users, being buildings its most common application. They are build-up of 2 or more electric pump units controlled by pressure switches or pressure transmitter with constant or changeable speed, with the possibility to couple to reservoirs which function will be to minimize the number ...

  • Model Sentry I G130 - Open-Air Aqua Booster System - Datasheet

    The Sentry I Open-Air System combines aeration with chlorination to provide superior water quality. The Sentry I Open-Air System adds air to the water with an adjustable venturi as it enters the tank through a solenoid valve that is controlled with an electronic float inside the tank. This air starts the oxidation process. While the unit fills, the chlorinator dispenses the exact amount of ...

  • SGT 350 Cutter Suction Dredgers - Datasheet

    ITALDRAGHESpA has 60 years' experience in manufacturing both standard and custom-designed dredgers. Its product range includes: cutter suction dredgers, dredge pumps and booster stations, as well as a wide range of dredging equipment including dredging attachments for ...


    By Italdraghe s.p.a.

  • SGT 600 C Cutter Suction Dredgers - Datasheet

    ITALDRAGHESpA has 60 years' experience in manufacturing both standard and custom-designed dredgers. Its product range includes: cutter suction dredgers, dredge pumps and booster stations, as well as a wide range of dredging equipment including dredging attachments for ...


    By Italdraghe s.p.a.

  • Rainbow Eco Suction Dredger - Datasheet

    ITALDRAGHE S.p.A specialises in the construction of cutter suction dredgers, submersible pump deep water dredging systems, booster stations and dredging ...


    By Italdraghe s.p.a.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you