water flow modeling Downloads

  • Model HWE, HCE - Pressure Booster Units Brochure

    HOMA pressure booster units are the ideal solution for water supply from wells, collection tanks, ponds etc. High performance, silent operation, easy installation, and fully automatic operation of the pump by just opening the tap are the main advantages of all HOMA booster units. Series HWE: Pump with pressure switch for automatic operation and diaphragm tank to avoid pump operation at small ...


    By HOMA Pumpenfabrik GmbH

  • Model SPK - SPS - SPL - Booster Pump Brochure

    SPK-SPS-SPL series pumps has designed for pumping non-abrasive and small particulars liquids. Impeller material is glass-fiber reinforced Noryl. Vertical-axis stage pumps with closed impellers can be separated bodies.  Balancing holes are getting high axial thrust. Impellers are balancing with dynamically. Outlet  flange is close to motor,inlet flange is close to base plate. Takes up ...


    By Sempa Limited

  • SunDyne - Model DVMX - Multi-Stage Pump - Brochure

    The DVMX is a fully compliant API-610 and ISO 13709 multi-stage process pump.- Flows to 6,604 gpm (1,500m³/hr)(50 Hz)- Heads to 4,920 ft (1,500 m)(50 Hz)Horizontal, axial split case running back-to-back impellers in heavy-duty double volutecasings.A P P L I C A T I O N S• Butane Transfer• Fuel• Gasification• Condensate Extraction• Solvents• Boiler Feed Booster• Feedwater Booster• Chemical ...


    By SunDyne Corporation

  • GEM - Model EN 12845 - Modular Firefighting Booster Set Brochure

    Lowara GEM seriesNew booster sets for fire protection according to EN12845In automatic sprinkler systems, trustworthy products are a must. Designed and tested to meet a building’s most demanding requirements, Lowara GEM firefighting booster sets deliver water when needed. The broad GEM range is built up of modules that can be tailored to any specific requirement. A combination of modules ...


    By LOWARA - a Xylem brand

  • Model API 610 OH1 - Oil & Gas Process Pump Brochure

    apI 610 oh1 process pumpsAmarinth B Series pumps are designed where applicable to API 610 10th edition specifications for the Petrochemical, Chemical and Oil & Gas markets and are fully ATEX compliant. All API materials are available to match your application, plus bespoke options including NACE compliant materials. Standard Documentation, Testing and NDT packs are offered. Alternatively bespoke ...


    By Amarinth Ltd.

  • Model SPL - A/B/C/D - Booster Pump Brochure

    SPL series pumps has designed for pumping non-abrasive and small particulars liquids. Impeller material is glass-fiber reinforced Noryl. Vertical-axis stage pumps with closed impellers can be separated bodies. Balancing holes are getting high axial thrust. Impellers are balancing with dynamically. Outlet flange is close to motor,inlet flange is close to base plate. Takes up less space due to ...


    By Sempa Limited

  • Model API 610 OH2 - Oil & Gas Process Pumps Brochure

    apI 610 oh2 process pumpsAmarinth A Series pumps are designed to API 610 10th edition specifications for the Petrochemical, Chemical and Oil & Gas markets and are fully ATEX compliant. All API materials are available as standard to match your application, plus bespoke options including NACE compliant materials. Standard Documentation, Testing and NDT packs are offered. Alternatively bespoke ...


    By Amarinth Ltd.

  • Model GPE, GPM - Self Priming Centrifugal Pumps Brochure

    HOMA self priming centrifugal pumps are the ideal solution for many applications in house and garden. High performance, silent operation and low weight easy handling are the main advantages of these units. By installation of the automatic pump control HPS 2  (see HOMA accessory program) on the discharge of the electric motor driven pumps, the pumps are able to operate as fully automatic ...


    By HOMA Pumpenfabrik GmbH

  • Model SCB-10-150-120 BL - Solar Centrifugal Booster Pump Brochure

    Table of Contents Introduction …………………………………………………………. 1.0 Product Overview ……………………………………………………. 2.0 Table 1: Controller Electrical Specifications Controller Features ………………..…………………………………. 2.1 Application …………………………………………………………... 2.2 Installation and Operations ...


    By SunPumps, Inc.

  • MAS GRUP - Model DS1, DB1, DM1, DMA1, DMB1 Series - Single Pump Unit Boosters - Brochure

    single pump booster setsSingle Pump Booster Sets1100TL-E072 1 CE DECLARATION MANUFACTURER COMPANY : MAS DAF MAKINA San. Tic. A.S. ADDRESS : Atasehir Bulvari Ata Çarsi K:4 No:59 ...


    By MAS GRUP

  • Premium

    106 / 206-BPC Operations Guide

    Model 106/206-BPC is designed for installation on t he discharge side of booster pumps to prevent starting and stopping surges. Main Valve (1) is a single seated, double chambered, hydraulically operated globe or angle pattern valve with a built-in check valve. Unless otherwise specified, 106/206-BPC is assemble d for service temperatures to 140 deg. F (60 deg. ...


    By Singer Valve Inc.

  • 8800 RO Booster 12 Vdc Datasheet

    SPECIFICATIONS:n MOTOR:TYPE: 12 VDC, Permanent Magnet,Totally Enclosed, Non-VentilatedLEADS: 20 AWG, 6” LONGTEMP. LIMITS: This Motor is Not Equipped with ThermalProtection. For User Safety, OptimalPerformance, and Maximum Motor Life, TheMotor Surface Temperature Should Not Exceed150°F (66°C), as Shown on the Heat Rise Graph.DUTY CYCLE: See Heat Rise Graphn PUMP DESIGN: 3 Chamber Diaphragm Pump, ...


    By Aquatec International, Inc.

  • 6800 RO Booster 12 Vdc Datasheet

    SPECIFICATIONS:n MOTOR:TYPE: 12 VDC, Permanent Magnet,Totally Enclosed, Non-VentilatedLEADS: 20 AWG, 6” LONGTEMP. LIMITS: This Motor is Not Equipped with ThermalProtection. For User Safety, OptimalPerformance, and Maximum Motor Life, TheMotor Surface Temperature Should Not Exceed150°F (66°C), as Shown on the Heat Rise Graph.DUTY CYCLE: See Heat Rise Graphn PUMP DESIGN: 3 Chamber Diaphragm Pump, ...


    By Aquatec International, Inc.

  • Tank Booster Thermostatic Mixing Valve Brochure

    The Cash Acme Tank Booster combines a Thermostatic Mixing Valve (TMV), a Flexible Connector and a Water Heater Tee in one package, and can effectively double a household’s hot water heater capacity while delivering hot water at safe temperatures in residential/commercial applications. Available in regular and “PRO” models, both versions of the TMV are factory set at ...


    By Cash Acme

  • Domestic Home Booster Pump System Brochure

    GRUNDFOS HOME BOOSTERThe Grundfos Home Booster is a self-contained cold water booster set, designed for domestic properties where the existing mains water supply is insufficient to meet the demand requirements of pressurised hot and cold water systems. The Home Booster is suitable for most domestic properties with one or two standard bathrooms with standard fittings, or en-suite, and cloakroom, ...


    By Pumpseal

  • Modular Pump House Pre-engineered Plant Brochure

    Modular Pump House Pre-engineered Plant Standard Features: Model # MPH P. O. Box 857 Georgetown, SC 29442 ? Phone: 843-546-7400 Fax: 843-546-7407 COPYRIGHT © 2008 by EnviroSep TYPICAL SPECIFICATIONS System Configuration Simplex, Duplex, Triplex, or Quadraplex System Controls Pressure, Temperature, Flow, or Other Pump System Variable or Constant Speed Standard Power 460 V (Other Voltages ...


    By EnviroSep Inc

  • 60-11/660-11 Booster Pump Control Valve Datasheet

    Booster Pump Control Valve60-11(Full Internal Port)660-11(Reduced Internal Port)MODELTypical InstallationInstall Model 60-11/660-11 valve as shown. Flexibleconduit should be used for electrical connections tothe solenoid control and the limit switch. A Cla-ValModel 52-03/652-03 Surge Anticipator Valve is rec-ommended for power failure protection.Note: Installation with valve stem vertical up ...


    By Cla-Val

  • 60-08/660-08 Booster Pump Control Valve w/ High Capacity Pilot System Datasheet

    60-08(Full Internal Port)660-08(Reduced Internal Port)MODELBooster Pump Control ValveTypical InstallationInstall Model 60-08/660-08 valve as shown. Flexibleconduit should be used for electrical connections tothe solenoid control and the limit switch. A Model52-02/652-03 Surge Anticipator Valve is recom-mended for power failure protection.• Designed for Larger Sized Pump Stations• Low Head Loss• ...


    By Cla-Val

  • Flowlight Booster Pump Installation Manual

    1FlowlightBooster Pump®andSolar Slowpump™Installation & Service Manual© 2003 by Dankoff Solar Products__________________________________________________________________________IMPROPER INSTALLATION WILL DAMAGE YOUR PUMP AND VOID YOUR WARRANTYThis manual is based on 20 years of experience with over 5000 pumps sold. We are pleased toobserve how few problems arise when our pumps are properly ...


    By Dankoff Solar Pumps

  • 60-73/660-73 Booster Pump Control Valve Datasheet

    Booster Pump Control Valve32A2SD2B4BBY 5A1AYOUTLETINLETTypical InstallationInstall Model 60-73/660-73 valve as shown. Flexible conduit should beused for electrical connections to the solenoid control and the limitswitch. A Model 52-02/652-03 Surge Anticipator Valve is recommendedfor power failure protection.Note: Valve stem can be located in either vertical up or horizontal po-sition.Schematic ...


    By Cla-Val

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you