Bottom Sludge Equipment For Water And Wastewater Available In Nova Scotia
-
PremiumManufactured by AMS, Inc.based in USA
Stops caving sediment! Use this manually-driven sampler for discrete interval sediment sampling in rivers, lakes, wetlands, and estuaries. To obtain a sample, the sampler is lowered to the surface as a dual tube or driven down to the desired depth where sampling is to begin below the surface. Upon reaching the desired sampling depth, the inner rods attached to the internal drive tip are retracted ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
SKS SKS lamella clarifiers are compact, ready-to-connect units for the separation of solids from liquids. They work according to the tried-and-tested counter-flow principle. Thanks to our TUBEdek lamella packs, the removal efficiency of the SKS separators is extremely high. The individual SKS lamella clarifiers modules with sedimentation surfaces from 18 m2 to 33 m2 can easily be connected in ...
-
Manufactured by Malmberg Gruppen ABbased in SWEDEN
The Malmberg circular sludge scraper is designed for wastewater treatment plants that place high demands on the final quality of the treated wastewater. The flexible design of the scraper makes it easy to adapt to different basin volumes. We prefabricate the main components of the scraper in our Malmberg engineering workshop to enable easy installation on ...
-
Manufactured by Finnchain Oybased in FINLAND
Double deck tanks are sedimentation tanks located on top of each other. This solution is used especially when land use requires efficiency. The chain scraper systems in double deck tanks are often either combined surface and bottom scrapers or bottom scraper solutions. Maintenance and repair in such tanks is usually expensive and challenging, which is why the reliable performance of the chain ...
-
Manufactured by Probig GmbHbased in AUSTRIA
For every customer, PROBIG® develops an unbeatable complete package with a multitude of advantages. PROBIG®’s application specialists create highly efficient solutions that enable enormous savings when it comes to energy and maintenance costs. With the world’s largest exclusive range of chains, sprockets and accessories, we can develop your brand new plant or cost-effectively ...
-
Manufactured by Likusta Umwelttechnik GmbHbased in GERMANY
The treatment of water polluted with solids is carried out in most cases with filter systems. They operate according to the sedimentation principle. Suspended matter is retained in the filter and deposited. The filtered water can subsequently be diverted and used. Nature serves as a model for this principle: Bank filtrate is water that is constantly trickling through the river bed and soil into ...
-
Manufactured by Triton Industriesbased in USA
The Triton Kraken Series vacuum loading pressure discharge system was designed for those applications when loading while under vacuum is necessary. This high-performance system excels under the most extreme conditions. These pumps feature closed loop hydraulic systems, solid state cycle control and twin shift cylinders loaded by the 2000 cfm Triton vacuum system. This system allows a constant ...
-
Manufactured by WesTech Engineering, LLCbased in USA
The ZICKERT Shark™ Bottom Sludge Scraper has over 3,000 installations all over the world, 90 percent of which are retrofits. It is designed for continuous sludge transport and performs well in all sedimentation processes, including grit ...
-
Manufactured by Mixing Systems, Inc.based in USA
High chrome construction for abrassion resistance flange connection for sludge ...
-
Manufactured by H2Flow Equipment Inc.based in CANADA
The Sigma flotation unit is designed to treat wastewater with medium to high solids loading. The capacity of the Sigma units range from 2200 to 4400usgpm (500 to 1000 m3/hr). The Sigma series are designed to create the best conditions for easy separation of the solids. The large free surface area and long retention time guarantee an optimum separation performance. The solids are collected in the ...
-
Manufactured by SupaVac - Poche Engineering Pty Ltdbased in AUSTRALIA
The SV60-V Guzzla Portable Solids Pump is a one man vacuum loading, pressure discharge pump capable of recovering and transferring up to 10m3/hr @SG1.0(44USGPM) of almost any flowable material. The SV60-V Guzzla Portable Solids Pump generates up to 25”Hg+ of vacuum combined with high airflow which allows the unit to transfer materials ranging from mining slurries and oil sludge through to ...
-
Manufactured by Stetfield Separators Ltd.based in UNITED KINGDOM
Primary wastewater solids settling and thickening via inclined parallel plates and bottom sludge-cones in sizes up to ...
-
Manufactured by Qingdao Watertools Technology Co., Ltd.based in CHINA
The Bottom Sampler acc. to Ekman-Birge is a quantitative sampler with precise sampling area to achieve nearly undisturbed samples in soft grounds. It consists of a sturdy-walled metal cabinet equipped with two spring-loaded jaws which are released by a messenger. Two light plates cover the top opening of the sampler to prevent the sample from being washed out during ...
-
Manufactured by Hebei Wansheng Environmental Protection Engineering Co., Ltd.based in CHINA
Waste water came into UASB from bottom up through the sludge zone, sludge and sewage touch each other and make anaerobic reaction to produce biogas,then rise to the top of the three-phase separator to achieve gas, solid, liquid separation.UASB can decompose more than 80% of organic pollutants and complete anaerobic reaction.Technical features: high volume load, simple equipment, easy operation, ...
-
Manufactured by Swiftgrow Ltdbased in CANADA
SWIFTCLEAN CLEAR POND is a dry blend of naturally occurring, scientifically selected microbes, enzymes and nutrients formulated to perform decomposition and digestion of the biomass ( sludge ) that builds up in pond bottoms over time. Because of the diversity of the microorganisms and enzyme systems, SWIFTCLEAN CLEAR POND is excellent for increasing water clarity. This sludge results from the ...
-
Manufactured by SAVI S.r.l.based in ITALY
PVD Travelling Bridges for Grease and Grit Removal are used to remove grease and grit in both municipal and industrial waste water treatment plants. PVD Grease and Grit Removal Travelling Bridges are used to remove grease and grit from rectangular tanks in both municipal and industrial waste water treatment ...
-
Manufactured by SISMAT ULUSLARARASI LTD. STI.based in TURKEY
Similarly to circular scrapers, they can be designed with a fixed bridge or a rotating bridge. They are equipped with bars placed within the basin to help accelerate the settling of ...
-
Manufactured by Esselent Solutions b.v.based in NETHERLANDS
The series 84 are the logical next step up from the 86 series. The special Suparator® construction is incorporated as a module that is fitted in tanks of different size and shape. The 84 series are meant for more demanding applications and processing of larger volumes of aqueous media. Special constructions like slanted bottoms for sludge accumulation are ...
-
Manufactured by Colubris Cleantechbased in NETHERLANDS
The PCS and CPS cross-flow separators are designed to separate settling parts like fibers, starch and sand from the wastewater.. Depending on the type of wastewater a PCS settler (executed with one or more sludge cones for the bottom sludge) or a CPS settler (executed with an auger sludge thickener for the bottom sludge) is applied. Each separator is custom built. Depending on your wastewater ...
-
Manufactured by Finnchain Oybased in FINLAND
Lamella tanks are sometimes used for accelerating sedimentation processes. The space required for lamella installations has been taken into account in this bottom scraper system. Finnchain’s chain scrapers run over two sets of wheels, moving on sliding rails at the bottom of the tank, so there is space in the middle and above the chain system for installing lamella plates. Sludge at the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you