Canal Gates Equipment For Water And Wastewater Available In New Jersey
-
Manufactured by The Rubber Companybased in UNITED KINGDOM
We can manufacture our hump gate seals in two standard formats. Either with a single or double hump depending on the application. Hump seals are generally used for sealing the top edge of submerged vertucal-lift gates. Our hump seal are typically bolted either side of the hump or the flat stem section of the profile. The hump section is then pressed against the sealing surface. The flexibility of ...
-
Manufactured by The Rubber Companybased in UNITED KINGDOM
Our omega gate seals are often used to create an internal seal between two surfaces on underwater tunnels. These seals generally perform as a membrane as they are exposed to three dimensional movements between the tunnel sections. Omega seals can also be reinforced with fabric in order to enhance the seal with additional mechanical properties. We can increase or decrease the number of fabric ...
-
Manufactured by The Rubber Companybased in UNITED KINGDOM
Our double P gate seals provide many of the same sealing properties found in our standard P gate seals. The main difference between the two, is that our double p seals enable you to seal against two surfaces using a single profile. The bulbs can compress under pressure in order to create a watertight seal. Double P gate seals typically secured and bolted through the stem to provide bulb ...
-
Manufactured by The Rubber Companybased in UNITED KINGDOM
Similar to our hump seal profiles our double hump seal profiles create a seal using compression under pressure. Our double hump seals are often commonly used on tidal river gates. The dual humps can protect from water either side of the channel, similar to our double P ...
-
Manufactured by Graftel, LLC.based in USA
Graftel LLC. can supply cost-effective elastomer sealing solutions to the nuclear power industry. Graftel can supply these seals either commercial or nuclear grade as like-for-like replacements for your existing seals at a fraction of your current ...
-
Manufactured by Dynamic Water Control Gates Inc.based in CANADA
Canal Gates With Elastomer EPDM Seals. Dimensions Square or rectangular openings up to 3048 mm. Materials Stainless steel (304 or 316) Galvanized or painted ...
-
Manufactured by Waterman Industriesbased in USA
WATERMAN C-20 CAST IRON CANAL GATES offer reliable water control on canal and pipeline systems which operate at low and medium heads. They are built-to-last and designed for years of reliable service, offering a typical field life exceeding 40 years. These gates offer superior performance to “look alike” products and best-in-class construction available only from ...
-
Manufactured by Simolex Rubber Corporationbased in USA
Extruded double bulb type silicone rubber gate seals, gaskets and weatherstrips are used as side and top rubber seals of dam and canal gates. Widest range of shapes and sizes available with or without abrasion resistant fluorocarbon film cladding, as per relevant IS / ASTM standards. Our double bulb type rubber gate seals are available at competitive price. These seals maybe used in a variety of ...
-
Manufactured by Watch Technologiesbased in USA
Watch Technologies designs, manufactures, replaces and removes Radial Gates /Tainter Gates. Our niche is the small to medium size gates. WT will work anywhere in the world where experience and expertise are ...
-
Manufactured by Bisan Inc.based in CANADA
BISAN represents two of the leading manufacturers of fluid control products with a long and successful installation lists in both Canada and the Middle ...
-
Manufactured by Oil Pollution Environmental Control Ltdbased in UNITED KINGDOM
The ‘Trash Trap’ is constructed in galvanized steel with a metal mesh basket. The basket incorporates small holes to allow the movement of water to continue whilst collecting the floating debris. Typically 1t capacity but can be made to different sizes depending on ...
-
Manufactured by The Rubber Companybased in UNITED KINGDOM
Our P seals or “music note seals” as they are also known, are available in two different formats. Depending on the load deflection criteria we may suggest either a solid or hollow bulb. The hollow bulb format is more suitable for use in low hydrostatic pressures. While the solid bulb format is less prone to compression. When under pressure, either the bulb or stem can create a seal. ...
-
Manufactured by Waterman Industriesbased in USA
WATERMAN C-10 CAST IRON CANAL GATES offer reliable water control on canal and pipeline systems which operate at low and medium heads. They are built-to-last and designed for years of reliable service, offering a typical field life exceeding 40 years. These gates offer superior performance to “look alike” products and best-in-class construction available only from ...
-
based in USA
The BayDrive is a remotely operated farm canal gate actuator. The BayDrive is designed to make surface irrigation less labor-intensive and more flexible so you can improve yields and reduce water ...
-
Manufactured by Watch Technologiesbased in USA
Two styles, Standard and Imperial, with two blades in one frame doing the work of at least two gates; undershot and overshot options in one gate. Single or double stem actuation to accommodate any size gate. The Standard has an upper blade to control upstream checking, level control, or overshot flow that can drop down to "capture" the lower blade and raise it for sluicing, large flow ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you