Centrifugal Pumps Articles

  • Harrison Hot Springs, Canada - Case Study

    Landustrie supplied two LANDY Archimedes screw pumps for flood control in the village of Harrrison Hot Springs, Fraser Valley, Canada. The screw pumps replaced the existing axial pump and had to meet increased environmental requirements and ensure fish survival rate exceeding 90%. For this project a special wristband around the outside diameter of the screw has been developed by Landustrie. This ...


    By Landustrie Sneek BV

  • PS Bangor City - Case Study

    Landustrie supplied two Landy Archimedes screw pumps for doubling the capacity of water storage in the underground storm water bassin at Pumping Station Luke's Point (Northern Ireland Water). With a capacity of 1,200 l/sec these screw pumps enable the station to deal with heavy rainfall and reduce flooding. Both screws dimension 1950 mm diameter and 6 meter long. Special feature is the use ...


    By Landustrie Sneek BV

  • Sanitary Pump Application

    Sanitary pumps involve the delivery of all human contact products such as pharmaceuticals, dairy products, beverages, foodstuffs, cosmetics, food additives, fine chemicals and the like. There are four basic types of sanitary pumps, centrifugal, volumetric, jet and air. Centrifugal ...


    By Adamant Valves

  • Meyer Screw Pump provides extended valve life

    A New Jersey based asphalt company approached Wm. W. Meyer & Sons seeking a solution to an issue they were having with a competitor’s airlock ability to hold a seal. The valve was lined with ceramic tiles and was supposed to have a one-year lifetime in that particular system. Unfortunately, the asphalt company realized the valves were only lasting 5-6 months at the most. The limited ...


    By Wm. W. Meyer & Sons, Inc.

  • Learn about Meyer’s Screw Pump qualities - valve life extender

    Meyer Screw Pump Provides Extended Valve Life A New Jersey based asphalt company approached Wm. W. Meyer & Sons seeking a solution to an issue they were having with a competitor’s airlock ability to hold a seal. The valve was lined with ceramic tiles and was supposed to have a one-year lifetime in that particular system. Unfortunately, the asphalt company realized the valves were ...


    By Wm. W. Meyer & Sons, Inc.

  • Raw water clarification by flotation with microbubbles and nanobubbles generated with a multiphase pump

    Raw water clarification by flotation was studied by injecting air into a centrifugal multiphase pump to generate microbubbles (MBs) and nanobubbles (NBs). Measurements of gas dispersion parameters were performed and optimal conditions were obtained using a pump pressure of 4 bar. Values showed a bubble Sauter diameter of 75 μm, an air holdup of 1.2%, a bubble surface area flux of 34 s−1 and an ...


    By IWA Publishing

  • Dutch Dewatering, a Dry Construction Site Revenue Model

    It was the spring of 2010 - during the establishment phase of BBA Pumps Inc. At the time, I went to visit several construction sites in the Netherlands to see how successful dewatering was being organized. Talk about a small country showing how great it can be! It was an absolutely eye-opening experience.  The Netherlands is one of the most densely populated countries in the world, with ...


    By BBA Pumps North America

  • Dutch Dewatering, a Dry Construction Site Revenue Model

    It was the spring of 2010 - during the establishment phase of BBA Pumps Inc. At the time, I went to visit several construction sites in the Netherlands to see how successful dewatering was being organized. Talk about a small country showing how great it can be! It was an absolutely eye-opening experience. The Netherlands is one of the most densely populated countries ...


    By BBA Pumps

  • Bell & Gossett introduces new hydronic pump selection criteria to maximize system efficiency

    Energy and maintenance expenses account for approximately 75 percent of the life-cycle costs of a centrifugal pump. With a growing emphasis on reducing energy consumption driven by government regulation and businesses seeking operational and financial efficiencies, HVAC system designers are seeking system solutions that maximize efficiencies while reducing costs. To address this demand and the ...

  • Horsepower on the pump curve

    Now that the head capacity relationship along the X and Y axes of the pump curve has been established in Part 1 of this series, the pump curve can be used to determine the amount of horsepower required to meet the head and capacity requirements for the job. Horsepower is a unit of power equal to 550 foot pounds per second or 746 watts. Water horsepower is the minimum power ...

  • Monitoring of typical pumps and aerator in a water treatment plant - Case Study

    Equipment, Context: Surface aerator:Vertical equipment, gearbox associated very high cost for wired solution, aggressive environment, very few visual and periodical inspections. Centrifugal pump: Located underground in concrete basement, busy area, pipes and metal structure all around. Effluent pump: Vertical equipment, ...


    By Wi-Care

  • Aquantum Slides to Victory with Xylem

    When it comes to winter sports, some things are essential but nothing perhaps more so than snow and, in this instance, ice. As with many sports, conditions have to be right, with too many moisture and temperature fluctuations posing a real risk to the safety of athletes. For engineering company Aquantum, this was a primary concern for the bobsleigh track in Sochi, ...


    By LOWARA - a Xylem brand

  • Winter is coming: precautions to protect your pumps

    Now that we are running up to December, the weather in the Northern hemisphere is slowly getting colder and colder. Although Western Europe has been fortunate with a reasonably mild fall, we are expected to get a harsh winter this year, meaning that it is good to prepare for the cold season. Being pump people, this means that we need to take precautions to protect our ...


    By BBA Pumps

  • DESMI’s Magnetically Powered Pumps Seal the Deal

    For companies pumping dangerous or expensive chemicals, leaks can endanger both personnel and the bottom line. Hermetically sealed, magnetically powered pumps are the state-of-the-play answer. The list of potentially dangerous or simply-too-expensive-to-lose substances being pumped from one part of an industrial process to another somewhere in the world is long. Take isocyanates, for example. ...


    By DESMI A/S

  • Pump Contract for MARS Tanker. Logistic Support Ship - Case Study

    In 2010 following many months of dialogue with BMT Naval Architects the initial purchase enquiry for the supply of pumps and systems for the 4 new logistic support ships for the U.K RFA (Royal Fleet Auxiliary) was received from the Korean Shipyard DSME. DESMI participated in the tender process from the very beginning and had an open and honest dialogue with both the ...


    By DESMI A/S

  • PET Preform Injection Molding Machine

    PET preform injection molding Machine is suitable for mineral water, carbonic acid drink, juice, cooking oil, medicine jar and detergent, cosmetic, packing bottle and many others. Machine Features Special injection construction designed to benefit for ...


    By Focare Mould Co.,Ltd.

  • Winter is coming: precautions to protect your pumps

    Now that we are running up to December, the weather in the Northern hemisphere is slowly getting colder and colder. Although Western Europe has been fortunate with a reasonably mild fall, we are expected to get a harsh winter this year, meaning that it is good to prepare for the cold season. Being pump people, this means that we need to take precautions to protect our equipment. This applies to ...


    By BBA Pumps North America

  • Energy Efficient Vertical Turbine Pumps Promote Sustainable Mining Efforts

    The computational fluid dynamics process advances highly efficient pump designs for difficult applications. Energy is a strategic input for the mining industry in Latin America and worldwide. Mining requires large amounts of energy, which drives up total operational costs. In Chile, mining companies consume 34 percent of the total energy produced in the country and spend approximately ...


    By Neptuno Fluid Technology Lid

  • Pumping at Subzero Temperatures

    Pumping of cryogenic (low-temperature) products is important for many applications, especially in the field of liquefied natural gas (LNG). The Sulzer J-unit is a special sealing system for cryogenic pumps. It was invented more than 60 years ago. The evolution of the J-unit design since then has been impressive and has now resulted in a recently filed patent application by Sulzer. ...


    By Sulzer Ltd.

  • Multiphase pumps for energy-efficient water and wastewater treatment

    Multiphase pumps are unique products with outstanding features compared to conventional centrifugal pumps. The approach consists of using the pumps not only for transport of liquids but also for partial gas supply and as dynamic mixer for gas enrichment. Therefore this novel pump conception barely has ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you