chemical pump Articles
-
Commonly Pumped Chemicals
During a recent survey of all enquiries we received for chemical applications we found that around 50% were for a very small number of chemicals, so we thought it would be useful to run through these chemicals and list the suitable pump materials for our most commonly pumped ...
-
Analog and Digital Drives for Chemical Feed Pumps
Dart Controls offers DC drives with the essential features required for water/wastewater and chemical feed applications. These drives integrate easily with PLC / SCADA systems providing 4-20mA signals for pump set speed. Advanced Digital DC drives offer verified actual speed feedback, diagnostic and process alarms and much more…. The 253G-200E-7 is our most popular DC drive. This ...
-
Lead Plating
A Midwest company is plating lead and etching the material with an HCl batch. The resultant wastewater had a lead concentration of 2,000-4,000 ppm. Traditional chemistry (pH adjustment to 9.8, coagulation/flocculation) could only decrease the concentration to 5.0 ppm. The facility was had to retreat the wastewater and only then could reach a lead level of 3.0 ppm. With the use of the IE-061 ...
-
Skid Systems - Case Study
A Chemical Metering Pump is seldom used by itself. It is usually a part (ok, the part) of a chemical injection system into a process. Such a system requires various accessories, valves and controls to dispense the exact amount of chemical demanded by the application which may itself vary. Let us say if you are using chemical pump to achieve pH balance for the water. You need to measure the pH of ...
By Aquflow
-
UP20 2" Aluminium AODD pump for polymers
Chemical company in Estonia chooses SAMOA UP20 pump to handle their fluids. The user, a chemical company based in Estonia, was a looking for a chemical pump, able to dispense around 20 m3/ hour of a polymer, which is inside a Flexitank. Polymer is a medium viscosity fluid, of around 1.500 cPs. In this particular case, since the polymer Is not chemical aggressive, and also not abrasive, a 2” ...
-
What equipment do I need to perform a vacuum filtration?
Filtration under vacuum, also known as Büchner filtration, is commonly used to isolate the solid precipitate from a solution. This technique is used in syntheses, for example when a reaction has yielded a solid, or in analyses including gravimetric analysis of suspended solids. Although performing the filtration is simple, several pieces of equipment are needed which must all fit together, ...
-
New Inspection Facility - Case study
CPS was awarded the contract to design and build a new inspection facility for a specialist alloy manufacturer. The contract included the design and construction of a new production building, electrics and processing equipment. The building works included the design and construction of a new building complete with 6 hoist overhead crane, production office and bunding with chemical resistant ...
-
Pump metering wastewater chemicals operationally effective and cost efficient
Pumps are the heart of wastewater treatment systems and pump metering chemicals is critically imperative to required wastewater treatment! Different types of pumps are designed for unique wastewater treatment pump applications. Centrifugal pumps are used for general wastewater pumping. Positive Displacement pumps are used for pumping heavier solids. Chemical Metering Pumps are used for pump ...
-
Optimizing Metals Removal
Optimizing Wastewater Metals Removal Making Wastewater Metals Insoluble for Easy Removal To remove metals from wastewater, the metals need to be insoluble (not in solution). Many facilities, such as in the plating operations, use chelating agents to keep the metals in solution thus insuring a uniform and continuous layer of plated metal. Other chelating agents come in the form of ammonia and ...
-
Liquid System Component Testing
Components such as valves, pumps, filters, degas modules, etc. are common sources of particles in a fluid handling system. Valves are typically found in sample collection locations where a liquid sample will be evaluated for various contaminants, including particles. Continuous moving parts in a pump create particles through friction, chemical degradation and cavitation. Filter testing is ...
-
Bespoke Power Measurement System for Heavy-Duty Pumps Using Existing Couplings - Case Study
Background Power plants use a wide range of pumps for multiple operations. These include primary pump systems, such as boiler feed pumps and cooling water pumps, as well as auxiliary pump systems, such as fuel transfer pumps, slurry pumps, lubrication pumps, and chemical feed pumps. Unsurprisingly, primary pumps, including boiler feed and water cooling pumps are critical to a plant’s ...
-
Evaluations of ChemTreat Solutions Automated Feed Systems at Southeast paper mill case study
A large Southeast Paper Mill was experiencing poor control with their water treatment supplier who was using pace and chemical verification instrumentation. The mill was experiencing major variances in cycle control, conductivity, P-alkalinity, and phosphate control. ChemTreat had investigated the causes of these variances and submitted their recommendations for improvement. As a result, ...
-
Real-time monitoring for reduced chemical maintenance
We are pleased to be featured in this month’s American Laundry News digital edition, together with our customer Walter E. Nelson, a janitorial, paper and chemical distributor in the Northwest that provides a wide range of laundry products and equipment. Jerry Roberts, of Walter E. Nelson, explains how he has experienced a significative improvement in the way his technical teams are able to ...
-
Mobile Fueling Trucks
What is mobile fuelling truck Mobile fuel truck for sale is also called Fuel Dispenser Truck, which is usually built on a truck chassis with tank volume from 3CBM to 40CBM, automatic reels, fuel guns, pumps and other main components on the basis of oil trucks. It is mainly used for Transportation and storage a derivative of petroleum (gasoline, diesel, crude oil, lubrication, and coal tar). ...
-
Cold weather ammonia reduction in municipal/industrial treatment plant case study
Problem During cold weather this municipal wastewater treatment plant with a high percentage of industrial flow from food processing and electronics manufacturing suffered from high ammonia loadings. As temperatures dropped the plant lost nitrification. The objective of this full-scale product application program was to reestablish ammonia oxidation and reduce ammonia-nitrogen in the lagoon ...
-
Autonomous intake selection optimisation model for a dual source drinking water treatment plant
The Mudgeeraba drinking water treatment plant, in Southeast Queensland, Australia, can withdraw raw water from two different reservoirs: the smaller Little Nerang dam (LND) by gravity, and the larger Advancetown Lake, through the use of pumps. Selecting the optimal intake is based on water quality and operators' experience; however, there is potential to optimise this process. In this study, ...
-
Validation of a fully autonomous phosphate analyser based on a microfluidic lab-on-a-chip
This work describes the design of a phosphate analyser that utilises a microfluidic lab-on-a-chip. The analyser contains all the required chemical storage, pumping and electronic components to carry out a complete phosphate assay. The system is self-calibrating and self-cleaning, thus capable of long-term operation. This was proven by a bench top calibration of the analyser using standard ...
-
Concentrated Juice Solution Treatment - Poland, 250 m3/d - Case Study
Project Description: Lenntech has engineered, manufactured and assembled a turnkey skid mounted concentrated juice solution treatment system with 2x atmospheric pressurised cationic and anionic ion exchange columns and regeneration system. The treated solution discharged specific waste elements in order to optimize the residual juice solution. The system has been installed as an R&D venture. ...
-
Plating Industry Wastewater Treatment
Industrial Wastewater Treatment Success Stories Plating Industry Mirror Manufacturer Simplified Treatment Back Into Compliance In the manufacturing of certain mirrors, a strong copper solution at low pH is used to apply a thin coating to the glass surface. After adhesion, the excess is washed off and collected as wastewater. The wastewater at this facility is treated using 4 chemicals: ...
-
City of Roswell, Georgia - Case Study
In late 2011, the United States Army Corps of Engineers (USACE) approved plans to install a new well and build a new water treatment facility for the City of Roswell, Georgia. Barlovento LLC was selected during a competitive bidding process to provide an iron and manganese removal system for the new water supply. AdEdge Water Technologies, LLC was contracted to design, manufacture, and commission ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you