Ceramic Filtration Equipment For Water And Wastewater
-
ShowcaseManufactured by atech innovations gmbhbased in GERMANY
atech innovations produces ceramic membranes for crossflow filtration suitable for many industries globally. The advantage of a crossflow filter is that it can operate continuously. The fluid moves over the membrane in a tangential direction so that particles on the filter surface are washed off. Even with high solids loads, the filter will not be ...
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 TÜV approved particulate monitor providing high quality emission measurement for low dust concentrations from dry industrial processes including Baghouses and Cartridge ...
-
PremiumManufactured by ENVEAbased in FRANCE
TÜV approved DynamicOpacity™ particulate monitor for emission measurement of dust from large dry industrial processes including Baghouses and Electrostatic ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Self-Cleaning Ceramic Filter (SCCF) collects, volatilizes and destroys particulate and condensable organics emitted from industrial process streams. It can be used independently as a filter media on hot and cold process streams or coupled with an oxidation module for total odor, Volatile Organic Compound (VOC) and Hazardous Air Pollutant (HAP) ...
-
PremiumManufactured by ENVEAbased in FRANCE
Controller based filter dust leak monitor (0-100%) for filter emissions monitoring after bag houses, cartridge filters, cyclones etc. where performance approvals are not ...
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 approved ProScatterTM particulate CEM for the extractive sampling and measurement of particulate in saturated wet gas streams. Continuous Particulate Monitoring for saturated wet stack applications typically found after wet scrubbers, wet electrostatic precipitators and wet flue gas desulphurisation ...
-
PremiumManufactured by ENVEAbased in FRANCE
Multi-sensor dust monitor designed for high quality emission measurement in industrial stacks after bag filters, cartridge filters, cyclones and process driers. Advanced Probe Electrification Multi-sensor dust monitor designed for high quality emission measurement in industrial stacks where regulatory approvals are not ...
-
PremiumManufactured by ENVEAbased in FRANCE
TUV QAL1 and MCERTS Approved, Stand alone or networked system option Particulate CEM providing high quality emission measurement for dust concentrations from industrial processes. Having a 0–7.5 mg/m³ certification range, the QAL 360 sensor can be used at low or high dust levels meeting the tightened minimum emission limit value of 5 mg/m³ for Large Combustion Plant specified in ...
-
PremiumManufactured by ENVEAbased in FRANCE
The DM 170 is designed to comply with the TÜV suitability testing scheme to EN 15267 and for measuring dust concentrations in a wide range of industrial ...
-
PremiumManufactured by Excalibur Water Systems Inc.based in CANADA
High purity 5-stage drinking water system from Excalibur features reverse osmosis membrane technology to provide you with water as it was intended to be, just high-quality ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
This pollution control system was built to capture and clean the gases generated from burning a mixture of medical waste (primarily soiled bandages). Suitable solution for most most medical processes (dependent on waste stream and ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
This pollution control system was designed to capture all the gases, soot and entrained solids emitted by the incinerator while burning a low plastic content RDF mix and process it to meet the European regulations, which are set out in directive 2000/76/EC, dated 4th Dec 2000. Suitable for most small scale industrial ...
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 Approved ProScatter particulate CEM providing high quality emission measurement of low dust concentrations from dry industrial ...
-
PremiumManufactured by ENVEAbased in FRANCE
Stand alone filter dust leak monitor (0-100%) for filter emissions monitoring after baghouses, cartridge filters, cyclones etc. where performance approvals are not ...
-
PremiumManufactured by Excalibur Water Systems Inc.based in CANADA
High purity 5 stage drinking water system from Excalibur features reverse osmosis membrane technology to provide you with water as it was intended to be, just high-quality ...
-
PremiumManufactured by ENVEAbased in FRANCE
Stand alone Cross Stack optical dust monitor suitable for measuring emissions after electrostatic precipitators and stacks without filtration systems. Used for emissions measurement (mg/m³) after electrostatic precipitators and baghouses or Process control applications. Advanced sensor design includes automatic drift (zero and span) ...
-
PremiumManufactured by Amafilter®based in NETHERLANDS
The Amafilter® amaCera ceramic PC filter cartridge is specially designed for the polishing filtration of liquid sulphur. Porous ceramic filters are used for solid particulate removal in liquid and gas applications. These rugged porous ceramic cartridges are manufactured by fusing aluminium oxide grains using a porcelain bond to form a strong, uniformly porous and homogeneous ...
-
PremiumManufactured by ENVEAbased in FRANCE
Stand alone TÜV approved filter dust monitor suited to the measurement of filter emissions after bag houses, cartridge filters, cyclones ...
-
PremiumManufactured by ENVEAbased in FRANCE
US EPA PS11 compliant ProScatter™ particulate CEM providing high quality emission measurement for low dust concentrations from industrial processes. Utilising the patented ProScatterTM Forward Scatter measurement technique for measuring particulate concentration levels, typically between 0.06 mg/m3 to 300 mg/m3, this measurement technique offers improved levels of performance which make the ...
-
PremiumManufactured by ENVEAbased in FRANCE
Multi-Sensor Dust Monitor certified to category 1 under ATEX / IECEx designed for indicative emissions trending and measurement in challenging hazardous zone. Advanced Probe Electrification technology, perfectly adapted for particulate monitoring after bag filters, cartridge filters, cyclones and process driers, where regulatory approvals are not ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you