Ceramic Membrane Filtration Equipment For Water And Wastewater
-
Manufactured by Filtros Ceramic Products / Filtros Ltd.based in USA
Distributing gas into a liquid can be most efficiently achieved by controlling the release of fine, uniformly dispersed bubbles through a porous ceramic media. Filtros Limited utilizes unique ceramic compositions and high temperature processing to produce diffusers that are mechanically stable and chemically inert throughout years of service. This makes our products the most efficient diffusers ...
-
Manufactured by Labdex LTDbased in UNITED KINGDOM
3 L Muffle Furnace LX777MF is a microprocessor controlled chamber with stable PID temperature control system. Equipped with a heating speed of 15 to 30 mins, the chamber adopts vacuum forming ceramic fiber with no power drops off with high temperature. Temperature uniformity with excellent protection of heating elements (HRE) is maintained. One press start button for pre-set programmes with ...
-
Manufactured by Hangzhou Sealcon Fluid Machinery CO., Ltdbased in CHINA
Replacement for: AESSEAL B04/B04U; BURGMANN BT-PNT 6/106; FLOWSERVE ...
-
Manufactured by ENETEX GmbHbased in GERMANY
Typical applications for hot gas filter is in gases in which standard filters like bag filters can´t be used due to the high temperature. The cartridges of hot gas filters consist of temperature resistant ceramic fibers. The dust removal from the surface of the filter elements occures by pressurized air impulses and the dust will be transported out of the system by screw ...
-
Manufactured by Gilson Company, Inc.based in USA
Asphalt binder ignition testing is an environmentally friendly and cost effective test method to determine asphalt content of paving mixtures and ensure high quality and economical asphalt product. The ignition method reduces testing time when compared to solvent extraction. A 1,200—1,800g sample of asphalt can be tested in 30—45 minutes with the NCAT Furnace. The unit can accommodate ...
-
Manufactured by Kalenborn Kalprotect GmbH & Co. KGbased in GERMANY
We use silicon carbide ceramics for plant components which are subject to not only extreme abrasive wear but also high temperatures or stresses due to temperature fluctuations. KALSICA is available in various quality grades depending on where it is used. Typical applications include coal dust distributors, cyclone linings and coke ramps. High-precision custom components, even for complex ...
-
Manufactured by NATI Refractories (Shanghai) Co., Ltd.based in CHINA
NATI Ceramic Fiber Vacuum Formed Shapes are made from ceramic fiber by vacuum formed during wet process, drying and casting as customers request and design, they can be produced different shapes, such as block, board, fabricated part, burner, cracking furnace peep sight hole, cylinder etc ,with density 300-400kg/m3?they can be also pre-installed resistance wire as electric boiling plate. ...
-
Manufactured by Okamoto Corporationbased in JAPAN
Model SPP600S is designed to polish semiconductor materials such as silicon, carbide, ceramics, brittle materials and metal. Stable uniformity and edge shape is achieved by our unique polish head design, and temperature control system. Pad surface, pad bulk condition, and pad surface temperature detecto r system are available as ...
-
Manufactured by Wateropolis Corp.based in USA
Cerina-250 is a fine-mesh angular granular ceramic product, uniquely engineered with fractured face structures to yield higher surface area to capture particulates. The angular shape offers excellent performance at an economical price point, with good hydraulic performance and flow distribution. Cerina-250 is ideal for most filtration applications, especially commercial and consumer product ...
-
Manufactured by Enviro Ceramicbased in IRELAND
Enviro Ceramic recently launched its novel new ceramic diffuser with an inert additive that prevents algae growth and biofouling. This reduces the maintenance and prevents clogging of the ultrafine ceramic nano pores that form the micro bubbles for efficient ...
-
Manufactured by Eagle Technology ASbased in NORWAY
IP rights belongs to Rena Quality Group. Eagle Technology manufactures complete components and system solutions according to Rena Quality Group’s specifications. Eagle Technology possesses all the required certifications and approvals for delivering according to NORSOK and all other demands connected to the oil and gas industry. For further information please visit Rena Quality Group or ...
-
Manufactured by Biothermica Technologies Inc.based in CANADA
Biothermica develops, finances, builds and operates carbon and energy projects from Ventilation Air Methane (VAM) released by underground coal ...
-
Manufactured by TANN Corporationbased in USA
Catalytic oxidizers use a catalyst to reduce the oxidation temperature. Unlike the 1,400F operating temperature of a thermal oxidizer, a catalytic oxidizer can operate at much lower temperatures such as 600-700F. This lower operating temperature can reduce the operating costs and prove to be the most efficient solution. Catalytic oxidizers can be either direct (no heat exchanger), recuperative, ...
-
Manufactured by Sumoto S.r.l.based in ITALY
Rewindable. Built in capacitor. Built in thermal overload. Upper bracket: Nickel plated cast iron. SS 316 available. Motor case: SS 304. Motor shaft: SS 304. Shaft extention and coupling: NEMA Standard. High quality radial and thrust ball bearings. Winding: enameled copper – Class F insulation. Degree of protection IP68/Class B insulation. Max temp. 35° with water cooling flow min. 0.08 ...
-
Manufactured by Enagic - Kangen Waterbased in USA
The NEW exclusive ANESPA DX Home Spa System transforms your ordinary bathroom into a natural hot spring resort. ANESPA DX produces a continuous stream of healthy ionized mineral water. With a new, larger ceramic cartridge that removes almost 100% of chlorine and other harmful substances in your tap water, and adds safe, moisturizing minerals that are healthy for your skin and hair. Enjoy a lovely ...
-
Manufactured by A-membranesbased in BELGIUM
Ceramic membranes with filtration layer made of metaloxides or SiC, and an organic layer grafted to the active surface layer Wide range of organic functionalisations available. Non-leaching technology. Resistant to high temperatures. Excellent solvent stability. Resistant to wide pH window. Easily cleanable. Dry storage possible after cleaning, without loss of performance. No use of glues, ...
-
Manufactured by Logical Clean Air Solutionsbased in USA
Logical Clean Air Solution's Substrates are extruded honeycomb monoliths containing thousands of parallel channels. The channel walls are coated with precious metal catalysts that convert noxious emissions into less harmful gases and water vapor. Ceramic substrates are used at the heart of catalytic converters to help reduce exhaust emissions from Diesel and gasoline-powered engines. Our Ceramic ...
-
Manufactured by Electronbased in NETHERLANDS
One of today’s most widely accepted air pollution control technologies across the industry is a Regenerative Thermal Oxidizer, commonly referred to as an RTO. They are very versatile and extremely efficient – thermal efficiency can reach 95-98%. They are regularly used for abating solvent fumes, odours, etc. for a wide range of industries. Regenerative Thermal Oxidizers are ideal in a ...
-
Manufactured by Tami Industriesbased in FRANCE
Tubular ceramic membranes ø 10 entirely made of high purity materials. Two geometries are available, correspond to user's needs. These ceramic membranes allow all operations of separation in Microfiltration, Ultrafiltration and Fine Ultrafiltration. The permeate flux performances, their low hold-up volumes and reduced energy consumption give them unequalled ...
-
Manufactured by novoflow GmbHbased in GERMANY
In addition to our experience and practical knowledge (since 1990) novoflow® provides upstream as well as downstream treatment ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you