Channel Covers Equipment For Water And Wastewater Available In Russia
-
PremiumManufactured by FPZ S.p.A.based in ITALY
A side channel blower can cover a wide range of flow/pressure combinations. The maximum flow rate that can be treated is 2.400 m3/h while the relative pressure range goes from -450 mbar (vacuum) to +650 mbar (pressure). Thanks to the blower’s modular features, this performance is achieved by combining the blower in different ...
-
PremiumManufactured by FPZ S.p.A.based in ITALY
A side channel blower can cover a wide range of flow/pressure combinations. The maximum flow rate that can be treated is 2.400 m3/h while the relative pressure range goes from -450 mbar (vacuum) to +650 mbar (pressure). Thanks to the blower’s modular features, this performance is achieved by combining the blower in different ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
SIL1 Certified MX 43 is a Flexible, High Quality, Easy to Use Gas Detection System. Fully scalable, and designed to functional safety performance level 1 standards, the MX 43 is an analog and digital controller that continuously measures and controls gases in the atmosphere. The MX 43 gas detector manages both digital lines and analog channels, and covers all needs for a wide variety of gas ...
-
PremiumManufactured by FPZ S.p.A.based in ITALY
A side channel blower can cover a wide range of flow/pressure combinations. The maximum flow rate that can be treated is 2.400 m3/h while the relative pressure range goes from -450 mbar (vacuum) to +650 mbar (pressure). Thanks to the blower’s modular features, this performance is achieved by combining the blower in different ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Portable Line potentiostats/galvanostats combine electrochemical research in the laboratory with on-site research using well-established electrochemical techniques. These small and affordable portable instruments enable you to develop applications for your specific research needs. Portable Line instruments are an ideal solution in many research areas, such as (bio)sensor, corrosion, or ...
-
Manufactured by Macpresse Europa S.R.Lbased in ITALY
The L series balers are designed and built to compact municipal solid waste, RDF and in general all recyclable materials. The MACPRESSE L series is characterized by high output efficiency thanks to the compression cycle speed and cutting efficiency of the materials exceeding the size of the compacting chamber. The MAC 108L/1 baler is the smallest of the MACPRESSE “L” series models. ...
-
Manufactured by Macpresse Europa S.R.Lbased in ITALY
The MAC 110/1 series has been appropriately designed to bale large quantities of recyclable materials. Thanks to its great work flexibility this model can bale all types of waste paper, plastic containers, aluminium cans, food tins and many more recyclable ...
-
Manufactured by Verderflex Peristaltic Pumps - part of the Verder Groupbased in UNITED KINGDOM
Maximum Flow Rate : 6.9 l/min. Maximum Discharge : 2 Bar. Easy-fit tube saddle for rapid tube changes : BS EN 1474 6082 TF Aluminium Alloy ...
-
Manufactured by Technical Manufacturing Corporation (TMC)based in USA
TMC's optical tables and isolation systems offer industry-leading performance and rigidity thanks to an all-steel construction and the highest core density and smallest honeycomb cell area on the ...
-
Manufactured by Verderflex Peristaltic Pumps - part of the Verder Groupbased in UNITED KINGDOM
Maximum Flow Rate: 17 l/min. Maximum Discharge: 2 Bar. Easy-fit tube saddle for rapid tube changes: BS EN 1474 6082 TF Aluminium Alloy ...
-
Manufactured by Agenis GmbHbased in GERMANY
Belt conveyers are for the bulk material feed developed haulage systems, which transport the bulk material on a particularly resistant, belt conveyer. This type of promoting is suitable outstanding for the horizontal or rising promotion over long distances and for heavy bulk materials with high throughput performances is predominantly used. Always the belt conveyer consists of a clamping station, ...
-
Manufactured by WAMGROUP S.p.A.based in ITALY
CMC Screw Conveyors are used in the precast concrete industry to convey fresh concrete from the compulsory mixer to the moulds, as an alternative to belt conveyors which, unlike screw conveyors, bear the risk of segregation of fresh concrete. CMC-type Screw Conveyors are manufactured from carbon steel with a suitable surface finishing. They are made up of a U-shape trough with wear-resistant ...
-
Manufactured by MEA Water Management GmbHbased in GERMANY
A wide variety of drainage channel covers and gratings are available from MEA WATER MANAGEMENT. Cover gratings play a crucial role when selecting a drainage system because they have a significant influence on the loading class of the complete drainage channel. The material, the design, the thickness of the grating and even the type of installation and fastening – choosing the right cover ...
-
Manufactured by Allied Moulded Products, Inc.based in USA
Non-corrosive, non-conductive, light weight with lower installation cost, easy to modify and longer life cycle compared to steel. Rigid design with back panel inserts plus nonmetallic mounting brackets and a gasket system encased in a continuous channel on the ...
-
Manufactured by LS Instruments AGbased in SWITZERLAND
The LSI Correlator™ is a digital correlator designed for real-time computation of auto- and cross-correlations as well as photon counting of pulse streams arising from dynamic light scattering (DLS), diffusing wave spectroscopy (DWS), diffuse coherence spectroscopy (DCS) and fluorescence correlation spectroscopy (FCS) experiments. This advanced hardware correlator implements both the ...
-
Manufactured by PicoQuant GmbHbased in GERMANY
The HydraHarp 400 is a high-end, easy to use, plug and play Time Interval Analyzer (TIA) and Time-Correlated Single Photon Counting (TCSPC) system with scalability for multiple channels (covered by patent DE 10 2008 004 549). It is connected to a PC through a USB 3.0 high speed interface. The high quality and reliability of the HydraHarp 400 is expressed by a unique 5-year limited ...
-
Manufactured by Fluid Control Europe (F.C.E.)based in FRANCE
PB1 Piping Basket is the most economical and commonly used model for piping storage and ...
-
Manufactured by Allied Moulded Products, Inc.based in USA
Non-corrosive, non-conductive, light weight with lower installation cost, easy to modify and longer life cycle compared to steel. Rigid design with back panel inserts plus nonmetallic mounting brackets and a gasket system encased in a continuous channel on the ...
-
Manufactured by Macpresse Europa S.R.Lbased in ITALY
The MAC 111AS/1 series has been appropriately designed to bale large quantities of recyclable materials. Thanks to its great work flexibility this model can bale all types of waste paper, plastic containers, aluminium cans, food tins and many more recyclable ...
-
Manufactured by Gale Pacific Commercialbased in USA
A premium polyethylene scrim reinforced polyfabric, specifically designed for floating cover and liner applications. Lightweight, flexible and durable Aquacon™ 345 exhibits class leading welding characteristics, providing effective and efficient field welding performance, ideal for in-factory fabrication and deployment ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you