Chemical Water Treatment (Chemical Water Treatment) Equipment Available In North Dakota
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Disinfectants kill present unwanted microrganisms in water. There are various different types of disinfectants: Chlorine (dose 2-10 mg/L), Chlorine dioxide, Ozone, ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
When referring to coagulants, positive ions with high valence are preferred. Generally aluminium and iron are applied, aluminium as Al2(SO4)3- (aluin) and iron as either FeCl3 or Fe2(SO4)3-. One can also apply the relatively cheap form FeSO4, on condition that it will be oxidised to Fe3+ during aeration. Coagulation is very dependent on the doses of coagulants, the pH and colloid concentrations. ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Ion exchange resins need to be regenerated after application, after that, they can be reused. But every time the ion exchangers are used serious fouling takes place. The contaminants that enter the resins will not be removed through regeneration; therefore resins need cleaning with certain chemicals. Chemicals that are used are for instance ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Corrosion is a general term that indicates the conversion of a metal into a soluble compound. Corrosion can lead to failure of critical parts of boiler systems, deposition of corrosion products in critical heat exchange areas, and overall efficiency loss. That is why corrosion inhibitors are often applied. Inhibitors are chemicals that ...
-
ShowcaseManufactured by Jenfitch INC.based in USA
Jenfitch offers a wide variety of coagulants and flocculants for your water treatment needs. We have developed customized coagulants and flocculants to achieve optimum clarity and fast settling in your clarifiers. Our flocculent are effective in increasing particle density and enhancing water release during the dewater phase. Jenfitch can ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Algaecides are chemicals that kill algae and blue or green algae, when they are added to water. Examples are copper sulphate, iron salts, rosin amine salts and benzalkonium chloride. Algaecides are effective against algae, but are not very usable for algal blooms for environmental reasons. The problem with most algaecides is that they kill ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Municipal water is often pH-adjusted, in order to prevent corrosion from pipes and to prevent dissolution of lead into water supplies. During water treatment pH adjustments may also be required. The pH is brought up or down through addition of basics or acids. An example of lowering the pH is the addition of hydrogen chloride, in ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
To promote the formation of flocs in water that contains suspended solids polymer flocculants (polyelectrolytes) are applied to promote bonds formation between particles. These polymers have a very specific effect, dependent upon their charges, their molar weight and their molecular degree of ramification. The polymers are ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Oxygen scavenging means preventing oxygen from introducing oxidation reactions. Most of the naturally occurring organics have a slightly negative charge. Due to that they can absorb oxygen molecules, because these carry a slightly positive charge, to prevent oxidation reactions from taking place in water and other liquids. Oxygen ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Foam is a mass of bubbles created when certain types of gas are dispersed into a liquid. Strong films of liquid than surround the bubbles, forming large volumes of non-productive foam. The cause of foam is a complicated study in physical chemistry, but we already know that its existence presents serious problems in both the operation of industrial processes and the quality of finished products. ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Chemical oxidation processes use (chemical) oxidants to reduce COD/BOD levels, and to remove both organic and oxidisable inorganic components. The processes can completely oxidise organic materials to carbon dioxide and water, although it is often not necessary to operate the processes to this level of ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Scale is the precipitate that forms on surfaces in contact with water as a result of the precipitation of normally soluble solids that become insoluble as temperature increases. Some examples of scale are calcium carbonate, calcium sulphate, and calcium silicate. Scale inhibitors are surface-active negatively charged polymers. As minerals ...
-
PremiumManufactured by Jenfitch INC.based in USA
Jenfitch offers a variety of chemicals that can be used to improve liquid/solid separation for industrial and municipal water treatment processes. We offer coagulants and flocculants that are NSF approved for potable use as well as potable water reuse applications. To learn more about our new and improved technology click below. ...
-
Manufactured by Water Maze - a brand by Kärcher North Americabased in USA
The Water Maze CoAg2-20A System is an advanced chemical treatment system, using the method of adding chemical coagulant and polymer to the treatment process, to efficiently remove suspended solids and emulsified oils from the water stream. The new Water Maze CoAg2-20A System is a ...
-
Manufactured by Brisben Waterbased in USA
The world’s first non-chemical water treatment solution for cleaning up endangered rivers and lakes of the world. Designed around Ecosphere’s multi-patented and proven Ozonix water treatment technology, the Sentinel is the first water treatment vessel of its kind to ...
-
Manufactured by Fluid Dynamics International Ltdbased in UNITED KINGDOM
Bacteria carried in water are potentially very harmful. Since 1973 Fluid Dynamics, leader in non-chemical water treatment solutions have been supplying their systems for solving problems caused by ...
-
by OxyGen Inc.based in CANADA
OxyGen's advanced oxidation water treatment technology generates powerful oxidizing agents onsite, without adding chemicals or media and delivers it to your water stream during treatment. A wide range of residual chemicals and contaminants are destroyed, while the oxidant provides ...
-
PremiumManufactured by Jenfitch INC.based in USA
RO systems bring a great advancement to water treatment. However, they are susceptible to biofouling. JC 9450 is effective at pre-treatment to remove any trace of organic contaminants and post-treatment to prevent biological re-growth. JC 9450 is a high strength oxidant in the same family as ozone but at a much lower capital and ...
-
by Aquaenergybased in GERMANY
Aquaenergy uses the natural principles of action to reduce microbiological components and organisms in flowing drinking and process water. Alternating electric fields programmed with a microprocessor are introduced into the flowing water. These provide resonance or interference oscillation with the organisms and microbiological ...
-
Manufactured by General Water Systems INCbased in USA
Chemical-free water treatment is attractive to facility managers because it removes the obvious risks inherent in the use, storage, handling, and dispersal of hazardous chemicals. While pulsed-power products are generally successful, operators’ strong desire for a reliable, chemical-free solution to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you