dosing tank Equipment available in Suriname

Available in Suriname| Near Suriname
64 Results found

We couldn't find any dosing tank equipment in Suriname

Here is a list of results available in Suriname

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Water & Wastewater ×

  • Subcategory: Chemical Water Treatment ×

  • Keyword: dosing tank ×

  • Available in: Latin America ×

  • Available in: Suriname ×

Accepta - Chemical Dosing Tanks

by Accepta     based in Manchester, UNITED KINGDOM

Accepta’s range of high performance chemical dosing tanks are manufactured using high quality blow moulded MDPE for improved durability and stability. All Accepta's dosing tanks incorporate a raised section to allow the easy installation of a chemical dosing pump to the upper part of the tank. All Accepta's tanks also incorporate a screw ...

TreatMent - Storage & Dosing Tanks

by TreatMent     based in Tel Aviv, ISRAEL

Synthetic tanks are indispensable in today's system technology. we have expanded our product range in terms of welded tanks and apparatus produced from thermoplastics; polyethylene (PE) and polypropylene (PP). These technologically proven materials have high resistance to an extremely wide range of chemicals and can be processed in extremely ...

Model i-DOSE - Intelligent Dosing Control Systems

by Nijhuis Industries     based in Doetinchem, NETHERLANDS

To effectively remove solids and COD from wastewater with flocculation-flotation systems, chemical dosing is required. Iron chloride is added to coagulate the water into small particles. By neutralizing and adding a polymer these small particles grow into larger flocs. These flocs can be separated by using a flotation system (DAF). The dosage of ...

Accepta - Bund Tanks

by Accepta     based in Manchester, UNITED KINGDOM

Accepta’s range of high performance chemical dosing tank bunds are manufactured from high quality natural MDPE and have been developed to be used along side the Accepta DT range of chemical dosing tanks. Accepta bund sizes range from 50 litres to 1000 litres and each bund tank incorporates an open top and rolled over top edge for improved ...

Accepta - Flooded Suction Kits

by Accepta     based in Manchester, UNITED KINGDOM

Accepta’s high performance flooded suction kits comprise a tank mounted frame and incorporate a mounting bracket for a single vertically mounted dosing pump (dosing pump not included). Accepta's flooded suction kits are ideal for with use with solutions that have a high viscosity or a low vapour pressure such as sodium hypchlorite. ...

Accepta - Chemical Storage Tanks

by Accepta     based in Manchester, UNITED KINGDOM

Accepta's range of high performance chemical storage tanks are manufactured using high quality black MDPE, moulded as a single sheet, single wall tank for improved durability and stability. Accepta’s chemical storage tanks are developed for use under ambient temperatures, at atmospheric pressure with a chemical solution specific gravity of ...

Model MPD2i - Direct Acid Injection System

by Heron Electric Company Ltd.     based in Ford, UNITED KINGDOM

The Heron MPD2i direct acid injection system addresses all these issues to provide you with a safe and reliable solution for the acidification of water in storage tanks.

Model AD-1 - Acid Dosing System

by Heron Electric Company Ltd.     based in Ford, UNITED KINGDOM

The Heron AD-1 dosing system is a unique low maintenance acid dosing system for the control of pH. The AD-1 is designed for high reliability, safety and accuracy.

Small Conveyor Equipment (Linear Conveyors)

by AViTEQ Vibrationstechnik GmbH     based in Hattersheim, GERMANY

AViTEQ small-scale conveying equipment is used everywhere fine-grained bulk materials and not too unwieldy mass parts must be delivered, conveyed, dosed, added or assigned from storage tanks. AViTEQ has led the way in producing these devices and drives in Europe for more than 50 years. They are employed in many branches of industry, e.g. in the ...

Model Kronos Series - Peristaltic Dosing Pumps

by Seko SpA     based in S.Rufina - Rieti, ITALY

The feed chemical is conveyed by means of the rotor squeezing on the hose. No valves are needed for this. This ensures gentle handling of the metered media. Kronos is the most complete and reliable series of peristaltic pumps ever produced by Seko. As a result of 35 years of experience,Kronos is able to adapt to the most simple applications, ...

Model DDE - Pump

by E.C.T. Offshore Service AB     based in Göteborg, SWEDEN

The DDE offers digital dosing with basic functions even for a low budget for easier applications. Now just 2 pump models cover a range where 12 or more were needed in the past.

Minimax Pumps - Solenoid Operated Dosing Pump

by Minimax Pumps     based in NASHIK, INDIA

It is a positive displacement diaphragm metering pump operating at 230V 50 Hz supply. It is base mountable. Solenoid pushes the diaphragm which in turn pushes the liquid into the system. Solenoid is actuated by a solid state electronic circuit. It has two controls for the desired accuracy of the dosing

Model VM 2000 - Dosing Trailer

by Vernon Morris Utility Solutions Ltd     based in Chester, UNITED KINGDOM

For Chlorination and DeChlorination. The unit enables up to 1m3/minute (60m3/hour), to be chlorinated from 10-100ppm. Flow through the unit is controlled via an integral ball valve and is monitored using a digital flow sensor and display. The trailer can also be used to raise Chlorine levels within DMA’s, (District Metered Areas), storage ...

WES - Model DS 200 - Fully Enclosed Chemical Dosing Units

by WES Ltd / Weschem Ltd     based in Basingstoke, UNITED KINGDOM

A fully enclosed chemical dosing system comprising a weatherproof Polyethylene rotationally moulded enclosure and integral bund into which can be fitted up to a 200 Litre integral storage tank or a grid shelf to accept users’ standard chemical storage container(s). Single duty or duty/standby pumps can be fitted with dose rates up to 150 ...

WES - Model DS1500 - Fully Enclosed Chemical Dosing Units

by WES Ltd / Weschem Ltd     based in Basingstoke, UNITED KINGDOM

A fully enclosed chemical dosing system comprising a weatherproof Polyethylene rotationally moulded enclosure and integral bund into which is fitted a 1700 Litre Polyethylene storage tank (working volume 1500L). Single duty or duty/standby pumps can be fitted with dose rates up to 150 Litres/hr.

Model M 30 RC - Pressure Regulators System

by Controlmatik ABW d.o.o.     based in Domzale, SLOVENIA

System of pressure regulators M 30 RC have been designed for direct dosage of gaseous chlorine under pressure, e. g. for open swimmingpools and tanks at locations where it is not possible to provide an auxiliary power supply. The capacities of the device vary from 0 - 2000 g/h, functioning on the principle of pressure in the chlorine cylinder with ...

WES DosingCube™ - Fully Enclosed Chemical Dosing Units

by WES Ltd / Weschem Ltd     based in Basingstoke, UNITED KINGDOM

A portable fully enclosed chemical dosing system comprising a weatherproof polyethylene rotationally moulded enclosure into which is fitted high quality digital dosing pumps complete with control valves, leak detection switch and can be configured with a controller/timer unit.

WES - Model DS 2500 and 5000 - Fully Enclosed Chemical Dosing Units

by WES Ltd / Weschem Ltd     based in Basingstoke, UNITED KINGDOM

Fully enclosed Chemical dosing units with either 2500 or 5000 Litre storage capacities with integral bunds.

Chemical Dosing System

by Shivsu Canadian Clear     based in Chicago, ILLINOIS (USA)

The chemical dosing systems used in the water treatment are made of quality products and are designed for perfection. The range of products that are available from Shivsu Canadian Clear are best known for its longevity, sturdy design and optimum performance.The chemical dosing system used is a Electro-Mechanical Unit provided with Pump Chemical ...

Chemical Dosing System

by Canadian Clear     based in San Antonio, TEXAS (USA)

The chemical dosing systems used in the water treatment are made of quality products and are designed for perfection. The range of products that are available from Canadian Clear are best known for its longevity, sturdy design and optimum performance. The chemical dosing system used is a Electro-Mechanical Unit provided with Pump Chemical Tank and ...

Need help finding the right suppliers?

Let the XPRTs do the work for you