Flocculation System Equipment
-
Manufactured by INVENT Umwelt- und Verfahrenstechnik AGbased in GERMANY
The Invent Hyperclassic Flocculation System is based on the patented hyperboloid mixer, which has been specifically designed to minimize floc shear while providing excellent mixing and eliminating settling within flocculation basins. The Flocculation System provides smooth mixing flow through the entire tank, ...
-
Manufactured by Meurer Research, Inc. (MRI)based in USA
of membrane filtration, the pressure is on for all stages of pretreatment — chemical feed, flocculation, sedimentation, and filtration — to act in concert. In response, Meurer Research, Inc. has developed MRI Flocculation Systems™ — integrating turbine, horizontal, and hydraulic flocculators into ...
-
Manufactured by Tehnika Plast-Wastewater Solutionsbased in SERBIA
Production of a pipe flocculators according to customer ...
-
Manufactured by Hrushikesh Water Sciences Pvt. Ltd.based in INDIA
We classify water impurities in three categories: suspended solids, colloidal particles (less than 1 micron) and dissolved substances (less than several nanometers). The coagulation-flocculation processes facilitate the removal of suspended solids (SS) and colloidal particles. Coagulation is the destabilization of colloidal and other ...
-
Distributed by S.K. Euromarket Ltdbased in CYPRUS
Our coagulation and flocculation systems are complete installations designed to increase the effectiveness and the efficiency of filtration systems, solids separation, fat oil and grease (FOG) separation and sludge treatment systems. These systems are either fed by ready-to-use coagulant and ...
-
Manufactured by Zhonghan Machinery Equipment (Tianjin) Co., Ltd.based in CHINA
The Dosing Flocculation System can provide automated equipment for dissolving, curing, and accurately adding chemicals to water in a certain proportion. Can be widely used in drinking water disinfection, printing and dyeing plant sewage, oil drilling and other industrial wastewater treatment. In the solution of Drilling Waste Management ...
-
Manufactured by Meurer Research, Inc. (MRI)based in USA
The slow mixing of MRI’s large paddle wheel accelerates the rate of particle collisions causing the agglomeration of electrolytically destabilized colloidal particles into settle-able sizes. All stainless steel, there is no glass-shard contamination or through-wall seals. MRI’s Paddle Wheel Flocculator provides a unique ...
-
Manufactured by WesTech Engineering, LLCbased in USA
The WesTech RapiSand™ ballasted flocculation system is a high-rate clarification process using rapid mixing and multi-stage flocculation, followed by sedimentation. RapiSand sedimentation is extremely fast, with rise rates exceeding 13 gpm/ft², and can be applied in a wide variety of suspended solids removal applications. The typical ...
-
Manufactured by Shanghai Centrifuge Institute Co., Ltd (SCI)based in CHINA
The 2-box and 3-box flocculant dosing device produced by our company is an automatic mechanism which doses PAM powder into solution. By dosing in batches, the flocculant particles will be fully cured to achieve the desired results. Flocculant dosing device can be operated through electric control panel from long distance, which is safe, ...
-
Manufactured by Matec S.r.l.based in ITALY
Bifloc is the Matec plant for the preparation of the flocculant, the polyelectrolyte which speed up the decanatation process of solids inside the decanter. The accessories of the metering plant make the setup process even more complete and automatic by reducing the consumption of the product and elimnating the need for an ...
-
Manufactured by Qiankun Environmental Protection Joint Stock Co.,Ltdbased in CHINA
QK-JY Flocculant auto dosing system widely applicate in treatment of raw water, boiler feed water , oil gathering, sludge dewatering treatment for all kinds of chemical dosing and wastewater treatment, it benefit with automatic control of chemical mixing, accurate dosing of coagulate, phosphate removing agent, ammonia, whitewash, ...
-
Manufactured by AAQUA N.V.based in BELGIUM
After forming small flocs in the coagulation step, flocculant is dosed in order to create bigger and more stable flocs. The flocculant is often called polymer or poly-electrolyte. Flocculant / poly-electrolyte must be prepared from a powder polymer or a fluid concentrated polymer. Polymer is a product that must be well mixed with water to ...
-
Manufactured by SEKO S.p.A.based in ITALY
PolyMan batching stations are used for the manual batching of liquid and powdered polymers and is the ideal choice for occasional or non-continuous ...
-
Manufactured by Wuxi Dajiang Environmental Technology Co., Ltd.based in CHINA
This device is an automatic and continuous powder dispensing and dosing system.The dry powder enters the premix and water from the screw at the bottom of the hopper for premix, and the wet material enters the mixing tank for dilution and mixing, and is prepared according to the concentration required by the user. The preparation solution goes from the preparation tank to the curing tank and then ...
-
by Spinprobased in USA
The SpinPro AutoFloc Automatic Polymer Flocculation Control System is a chemical control system used to optimize flocculant and/or coagulant dosage on dewatering applications including but not limited to screw presses, belt presses, dewatering tubes (Geo-Tubes), centrifuges, clarifiers and DAF;s. The system ...
-
Manufactured by ACT / Aquamatchbased in TURKEY
Coagulation Flocculation Clarifier Systems are used to treat water with high suspended solid ...
-
Manufactured by Wuxi Dajiang Environmental Technology Co., Ltd.based in CHINA
This device is an automatic and continuous powder dispensing and dosing system.The dry powder enters the premix and water from the screw at the bottom of the hopper for premix, and the wet material enters the mixing tank for dilution and mixing, and is prepared according to the concentration required by the user. The preparation solution goes from the preparation tank to the curing tank and then ...
-
Manufactured by Wuxi Dajiang Environmental Technology Co., Ltd.based in CHINA
This device is an automatic and continuous powder dispensing and dosing system.The dry powder enters the premix and water from the screw at the bottom of the hopper for premix, and the wet material enters the mixing tank for dilution and mixing, and is prepared according to the concentration required by the user. The preparation solution goes from the preparation tank to the curing tank and then ...
-
Manufactured by Wuxi Dajiang Environmental Technology Co., Ltd.based in CHINA
This device is an automatic and continuous powder dispensing and dosing system.The dry powder enters the premix and water from the screw at the bottom of the hopper for premix, and the wet material enters the mixing tank for dilution and mixing, and is prepared according to the concentration required by the user. The preparation solution goes from the preparation tank to the curing tank and then ...
-
Manufactured by Wuxi Dajiang Environmental Technology Co., Ltd.based in CHINA
This device is an automatic and continuous powder dispensing and dosing system.The dry powder enters the premix and water from the screw at the bottom of the hopper for premix, and the wet material enters the mixing tank for dilution and mixing, and is prepared according to the concentration required by the user. The preparation solution goes from the preparation tank to the curing tank and then ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you