Only show results available in Virginia? Ok

Polymer Feed (Chemical Water Treatment) equipment

  • PolyBlend - Model M-Lo Series - Polymer Feed System

    The PolyBlend® M-Lo Series liquid polymer feed system provides consistent and accurate dosage to improve polymer efficiency. It offers all of the benefits of the best available polymer preparation system at a competitive price. The ready-to-install system provides consistent and accurate dosage and improves polymer efficiency. Seven models are ...

    By Indachem Inc. based in Toronto, ONTARIO (CANADA).

  • Premium

    ProMinent PolyRex - Metering Systems

    Capacity range of up to 3,820 l/h. The metering system PolyRex is a double-decker batching station for the processing of liquid and powdered polymers. It consists of the feed and mixer unit and the two stainless steel double-decker tanks. The polymers used are ideally utilised.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY. from Metering Systems for Polymers Product line

  • Premium

    Ultromat - Model ULPa - Metering Systems

    Extraction rates from 400 to 4,000 l/h. The metering system Ultromat ULPa (oscillating system) is ideal for batching flocculation aids for the preparation of a ready-to-use polymer solution.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY. from Metering Systems for Polymers Product line

  • Premium

    Ultromat - Model ULDa - Metering Systems

    Extraction rates of up to 2,000 l/h. The ProMinent metering system Ultromat ULDa is an automatic polyelectrolyte preparation system. It is useful wherever polymers need to be automatically prepared as polymer solutions to act as flocculation aids.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY. from Metering Systems for Polymers Product line

  • Premium

    Ultromat - Model ULFa - Metering Systems

    Extraction rates of up to 8,000 l/h. Polymer batching station Ultromat ULFa (continuous flow system): This metering system can be used to batch flocculation aids for the preparation of a ready-to-use polymer solution. The system was designed for the fully automatic batching of polymer solutions.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY. from Metering Systems for Polymers Product line

  • Model CH100 - Dry Polymer Preparation System

    The SNF Floquip CH100 Dry Polymer System is specifically designed for customers that will use up to 100-pounds of dry polymer per day. Economics, automatic control, dependability and ease of operation are some of the benefits of this system. Years of experience with dry polymer preparation combined with the knowledge of the leading manufacture of ...

    By SNF Polydyne, Inc. based in Riceboro, GEORGIA (US) (USA). from Feed Equipment Product line

  • Model DH Series - Dry Polymer Preparation System

    The Dry Polymer Preparation Systems are designed for dependable operation. Years of field experience with dry polymer preparation, combined with the knowledge of the leading manufacturer of water-soluble polymers, is incorporated into every design.

    By SNF Polydyne, Inc. based in Riceboro, GEORGIA (US) (USA). from Feed Equipment Product line

  • Model DB Series - Dry Polymer Preparation System

    The Dry Polymer Preparation Systems are designed for dependable operation. Years of field experience with dry polymer preparation, combined with the knowledge of the leading manufacturer of water-soluble polymers, is incorporated into every design.

    By SNF Polydyne, Inc. based in Riceboro, GEORGIA (US) (USA). from Feed Equipment Product line

  • Model EM Series - Liquid Polymer Preparation System

    Liquid Polymer Preparation Systems are designed for dependable operation. Years of field experience with liquid polymer preparation, combined with the knowledge of the leading manufacturer of water-soluble polymers, is incorporated into every system design. The EM series is our simplest and most economical system. The EM Series meters the polymer ...

    By SNF Polydyne, Inc. based in Riceboro, GEORGIA (US) (USA). from Feed Equipment Product line

  • Model EA Series - Liquid Polymer Preparation System

    The Liquid Polymer Preparation Systems are designed for dependable operation. Years of field experience with liquid polymer preparation combined with the knowledge of the leading manufacturer of water-soluble polymers is incorporated into every design. The EA series meters the polymer with a progressive cavity pump. The polymer is injected through ...

    By SNF Polydyne, Inc. based in Riceboro, GEORGIA (US) (USA). from Feed Equipment Product line

  • Vitec - Model 7000 - Multicomponent Liquid Antiscalant and Dispersant

    Vitec 7000 is a multicomponent liquid antiscalant and dispersant that provides a high level of sulfate inhibition and allows increased reverse osmosis (RO) system recoveries in challenging waters. It prevents calcium sulfate (CaSO4) scale precipitation, allowing up to 7 times saturation. The primary application of this product is brackish water or ...

    By Avista Technologies, Inc. based in San Marcos, CALIFORNIA (USA). from Antiscalants - Coagulant Polymer Compatible Product line

  • Alumer - Alum Polymer Blend

    Alumer™ is USALCO’s blend of iron-free Aluminum Sulfate (Alum) with a polymer. It is used for water treatment facilities, including drinking water and industrial make up water. USALCO’s proven ability to blend iron-free, low contaminant alum with a variety of highly effective polyelectrolytes ...

    By Usalco, LLC based in Baltimore, MARYLAND (USA).

  • Chemical Feed Systems

    Chemical Feed Systems generally consist of a steel base “skid” which a chemical storage tank and pumps are mounted too which then Feed or “Inject”, “Dose” chemicals into the process at a precise rate. There is an endless list of chemicals and applications these are used for such as phosphates for boiler water ...

    By Johnson March Systems, Inc. based in Ivyland, PENNSYLVANIA (USA).

  • Sludge Dewatering Polymer Dosing Station

    Canamidex polymer systems (chemical preparation) are made completely from high quality stainless steel. They are available in a batch system, automatic and semi automatic systems to suit the needs of every customer.

    By Canamidex International Corp. based in Richmond Hill, ONTARIO (CANADA). from Canamidex Sludge Dewatering Products Product line

  • Model 500 - High Capacity Polymer Processing System

    Acrison’s Model 500 Polymair Preparation System cuts water and wastewater treatment costs through the accurate metering, positive dispersion, and complete wetting of dry and liquid polymers. The Model 500 Preparation System automatically and efficiently prepares a homogeneous and precise solution from either dry or liquid polymers at ...

    By Acrison, Inc. based in Moonachie, NEW JERSEY (USA). from Water and Wastewater Treatment Product line

  • Tramfloc - Model 522 - Cationic Coagulant

    TramflocE 522 is a high molecular weight, highly charged, liquid cationic polymer and inorganic coagulant aid blend. TrarnflocE 522 is completely water soluble and all Tramfloc* 520,620, and 730 series polymers are NSFE approved for clarification of potable water, food processing and membrane feed water.

    By Tramfloc, Inc. based in Spring, TEXAS (USA). from Coagulants Product line

  • Polymore/PolyRex - Dissolving and Dosing System

    A complete dissolving and dosing system for liquid concentrated emulsion or dispersion polymers.

    By Tomal AB based in Vessigebro, SWEDEN.

  • FLEXFLO - Model MBW - Micro Batch Feeders

    MBW Micro-Batch Feeders are particularly suitable for feeding free or moderately flowing materials which do not tend to pack under pressure in a variety of industries, among which plastics processing, animal feed milling, as well as waste water and drinking water treatment. MBW Micro-Batch Feeders for continuous volumetric feeding of powdery or ...

    By WAMGROUP S.p.A. based in Ponte Motta/Cavezzo (MO), ITALY. from Micro Batch Feeders Product line

  • Tramfloc - Model 556 - Cationic Coagulant

    Tramfloc 556 is a high molecular weight, highly charged, liquid inorganic coagulant aid of polyaluminum chloride. Tramfloc 556 is completely water soluble and all Tramfloc 520,620,550 and 730 series polymers are NSF£ approved for clarification of potable water, food processing and membrane feed water.

    By Tramfloc, Inc. based in Spring, TEXAS (USA). from Coagulants Product line

  • Tramfloc - Model 550-556 - Cationic Coagulant

    Tramfloc 550-556 are high molecular weight, highly charged, liquid inorganic coagulant aids of polyaluminum chloride. Tramfloc2 550-556 are completely water soluble and all Tramfloc'2 520, 620, 550 and 730 series polymers are NSF2 approved for clarification of potable water, food processing and membrane feed water.

    By Tramfloc, Inc. based in Spring, TEXAS (USA). from Coagulants Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you