Chlorine Dioxide Dosing Equipment For Water And Wastewater In United Arab Emirates
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Iron removal plants can be based on different filtration media, depending on the iron and manganese concentration, the oxygen level, CO2 content and hardness of the ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Disinfectants kill present unwanted microrganisms in water. There are various different types of disinfectants: Chlorine (dose 2-10 mg/L), Chlorine dioxide, Ozone, ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
GAP removes contaminants from Kraft process liquors while recovering valuable acid. Throughout the Pulp & Paper industry, chlorine dioxide (ClO2) is used in the pulp-bleaching process. ClO2 generators chemically convert sodium chlorate to chlorine dioxide and sodium sulfate in a strong solution of sulfuric acid. The acid is continuously purged from the generator in order to prevent the ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
Based on the APU® system, the GAP system operates on chlorine dioxide generators in Kraft mills. During chlorine dioxide generation, sodium sulfates are also produced and can accumulate to cause problems. The GAP system separates the sulfuric acid solution containing chlorine dioxide from the sodium sulfate, allowing for reduced caustic and sulfuric acid purchases, fewer shutdowns, and low ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Lenntech offers a range of ozone measuring modules. The range covers ambient ozone measurement, high concentration ozone measurement and dissolved ozone analysers. The advantage of these compact ozone analysers is that at low cost the area around the ozone generator is continuously controlled against any ozone leakage and ozone concentrations. More expensive UV based ozone monitors are also in ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Lenntech ClO2 generators can produce up to 150 g/h of ClO2 for horticulture, bottled water disinfection or CIP ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Ion exchange resins need to be regenerated after application, after that, they can be reused. But every time the ion exchangers are used serious fouling takes place. The contaminants that enter the resins will not be removed through regeneration; therefore resins need cleaning with certain chemicals. Chemicals that are used are for instance sodium chloride, potassium chloride, citric acid and ...
-
Manufactured by ProMinent GmbHbased in GERMANY
2.5 – 2,000 g/h chlorine dioxide. Maximum volume of water that can be treated with metering of 0.2 ppm ClO2, depending on the size of the system: 50 - 10,000 m3/h Chlorine dioxide system for the metering of chlorine dioxide with diluted starting chemicals. The certified yield guarantees efficient chlorine dioxide production. Bello Zon CDVd can be easily and safely integrated into any water ...
-
Manufactured by Industrie De Nora S.p.A. | De Nora Water Technologiesbased in ITALY
The MIOX Blackwater trailer is a mobile chemical-free disinfection system designed to meet high volume disinfection needs with ease. This dual-MIOX system design can meet fluctuating oxidant demand and water volume all within a footprint no larger than 9’ by 40’. Safe oxidizing chemistry generated at your site when you need it, with ZERO clean-up or spill procedures. Capable of dosing ...
-
based in USA
The Det-Tronics GT3000 line of electrochemical fixed-point toxic-gas detectors provides continuous monitoring of the atmosphere for potentially hazardous toxic gas leaks or oxygen ...
-
Manufactured by ProMinent GmbHbased in GERMANY
5-200 g/h chlorine dioxide. Max. flow at 0.2 ppm ClO2 metering is 1,000 m3/h. Chlorine dioxide system, which continuously produces ClO2 according to the acid/chlorite method with diluted chemicals. Extremely simple operation, clear construction, analogue control, manual control or via ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Graduated measuring ranges 0.01 – 10 mg/l. Chlorine dioxide measurement with DULCOTEST sensors offers precise, reliable, application-specific measured values in real time for all oxidation and disinfection ...
-
Manufactured by Industrie De Nora S.p.A. | De Nora Water Technologiesbased in ITALY
The RIO Gila is designed for on-the-fly frac water disinfection. With max concentrations at high dosage, this rugged mobile system is designed to treat high-demand water at over 100 Barrels/Minute. Easily transport the RIO Gila from frac site to frac site for produced water treatment. MIOX Mixed Oxidant Solution (MOS) technology also provides a residual disinfection down-hole where it counts ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Measuring ranges 0 – 100 °C. Temperature measurement with DULCOTEST sensors: Can be used for direct temperature measurement or temperature compensation during measurement of pH, fluoride, conductivity, chlorine dioxide or hydrogen ...
-
Manufactured by Industrie De Nora S.p.A. | De Nora Water Technologiesbased in ITALY
De Nora Capital Controls MicroChem 3 is a brand new innovation based on the expertise and history gained through decades of chlorine management and analysis. It combines the best features of our respected analysers and controllers to come up with an innovative solution you can tailor to your own water analysis and control ...
-
Manufactured by Industrial Scientificbased in USA
Built to Industrial Scientific’s highest quality and reliability standards, GasBadge Pro provides a lifetime of gas hazard protection. A wide range of sensor types makes it easy to monitor unsafe levels of gases specific to your ...
-
Manufactured by ProMinent GmbHbased in GERMANY
8 – 89 g/h chlorine dioxide generation. Bello Zon® CDLb H2SO4 especially for applications critical with regard to corrosion for the production of low-chloride chlorine dioxide liquid. With the chlorine dioxide system, ClO2 is produced discontinuously following the acid / chlorite procedure. ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Graduated measuring ranges 0.02 – 2 mg/l. Chlorite measurements with DULCOTEST sensors in disinfection processes involving chlorine dioxide – high process reliability ...
-
Manufactured by Pem-Tech, Inc.based in USA
Model PT395 Series is a 24 VDC powered toxic gas detector consists of an interface module in a flame proof instrument enclosure and a 316 Stainless Steel sensor head assembly. The detectors monitors a variety of toxic gases in parts per million (ppm) range, including: ammonia, carbon monoxide, chlorine, chlorine dioxide, hydrogen, hydrogen chloride, hydrogen sulfide, nitric oxide, nitrogen ...
-
Manufactured by Pem-Tech, Inc.based in USA
Trust PemTech's gas sensors to detect toxic gases in the air and depleted levels of oxygen. Our Model PT295 Series is a 24 VDC powered toxic gas detector consists of an interface module in a flame proof instrument enclosure and a 316 Stainless Steel sensor head assembly. The detectors monitor a variety of toxic gases in parts per million (ppm) range, including: ammonia, carbon monoxide, chlorine, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you