Concrete Tanks Equipment For Water And Wastewater Available In British Columbia
-
ShowcaseManufactured by Water Storage Tanks, Inc.based in USA
Oversized roofs on tanks are a common practice to achieve a more aesthetically appealing roof line with water tanks. Often times this is done to match the profile of masonry or a stone wall covering the exterior of tank or to match the roof line of an existing building or structure. CorGal roofs are regularly used on structures that do not hold water in order to create a visual architectural ...
-
PremiumManufactured by BioKube A/Sbased in DENMARK
BioKube’s Mars systems are small STP plants most commonly used for single households or smaller residential groups producing up to 30 m³ wastewater a day. The Mars 3000 system is typically in-stalled after a septic tank either in-or above ...
-
PremiumManufactured by BioKube A/Sbased in DENMARK
BioKube Venus systems are small STP plants most commonly used for single or smaller groups of households. The Venus systems are typically installed after a septic tank either in- or above ...
-
PremiumManufactured by Zetaş Kimyabased in TURKEY
The location of the water tank is extremely important at the point of increasing the efficiency of use and creating a more spacious environment. The techniques and evaluations used in this regard are in accordance with the application principle and should overlap with the project. The underground water tank, which provides durable and trouble-free storage for many years, is one of the best ...
-
PremiumManufactured by Zetaş Kimyabased in TURKEY
Modular Tank Water Treatment Systems: Upper Level Electrode, Tank Top Manhole Cover, Tank Water Level Indicator, Overflow Pipe, Ladder, Tank Modules Connected to Each Other with Bolt Nut, Edipian Rubber Gasket and Special Silicone Between Modules, Under Tank Concrete or Steel Base, Bottom Tank Cover Bolted Gasket, Tank Relief Valve, Bottom Level Electrode. ...
-
PremiumManufactured by IMKO Micromodultechnik GmbHbased in GERMANY
The rod probe is designed for abrasive and conductive bulk solids like ores, foundry sand, coal, rough gravel and similar materials. Special about the probe is that probe head and electronics are modular. In case of abrasion of the probe head you just exchange it without touching the electronics. The probe head consists of V2A steel with wear-resistant silicon nitride ...
-
PremiumManufactured by Zetaş Kimyabased in TURKEY
Oven Painted Modular Water Tank designed to use water when needed. There are varieties of reinforced concrete, stainless steel, masonry, plastic and fiberglass in this field. Generally, the water tanks located on the roof are connected to the mains in the city. The water tank is activated when there is any damage to the mains water. Through these tanks, the need for clean water is also met. ...
-
PremiumManufactured by BioKube A/Sbased in DENMARK
The BioKube BioReactor is most commonly used for treating wastewater from smaller villages and factories and retro fit with daily wastewater outlet of more than 100 m³. The system is designed for placement in in-situ casted concrete ...
-
PremiumManufactured by Sauereisen Inc.based in USA
FibreCrete - AR 206 is a fiber-reinforced, chemically-resistant, 100% solids, epoxy lining system used to protect concrete and steel tanks, scrubbers, ductwork and other vessels from abrasion and chemical and physical abuse. The interlocking fiber matrix of FibreCrete systems exhibit outstanding flexural and tensile strengths. Fibrecrete AR 206 offers excellent resistance to abrasion, heat and ...
-
PremiumManufactured by BioKube A/Sbased in DENMARK
BioKube Jupiter systems are predominantly used for cities, gated communities and resorts. BioKube Jupiter systems are delivered fully equipped ready to be installed as a plug and play unit. Each unit contains a treatment zone with aerated filters and a settling zone to remove all ...
-
PremiumManufactured by BioKube A/Sbased in DENMARK
BioKube’s Jupiter systems are STP plants commonly used for treating waste water from hotels, resorts & smaller villages with daily inlet values of up to 250 m³. The systems are typically installed underground in front of a septic tank and a buffer ...
-
PremiumManufactured by BioKube A/Sbased in DENMARK
BioKube offers containerized wastewater treatment plants for easy setup and relocation. This solution is ideal for remote locations such as mining camps and oil rig sites. We offer a variety of capasities that can meet your requirements. As the pre-assembled wastewater treatment plant is located inside a standard 20 or 40 foot shipping container, it can be relocated and installed with ease at ...
-
PremiumManufactured by CETCObased in USA
LIQUID BOOT is a seamless, spray-applied, water-based membrane containing no VOCs, which provides a barrier against vapor intrusion into structures. LIQUID BOOT is installed under slab and on below grade vertical walls as a gas vapor barrier to minimize vapor and nuisance water migration into buildings. LIQUID BOOT spray-application directly to penetrations, footings, grade beams, pile caps and ...
-
PremiumManufactured by BioKube A/Sbased in DENMARK
BioReactor systems are installed in on-site built concrete tanks. The main advantages of this are that the use of local labor is maximized as opposed to a system being delivered completely finished to the end site. Also this means that cost of transportation is reduced since only the active cleaning units are shipped and not the settling zones. These are part of the concrete ...
-
PremiumManufactured by BioKube A/Sbased in DENMARK
BioKube offers a system in concrete one-unit tank. As shown in the pictures below, the one-unit system is naturally a good deal ...
-
PremiumManufactured by BioKube A/Sbased in DENMARK
BioKube basic technology of submerged aerated filters built in a number of standard units are easily scalable. Much like children playing with LEGO toy plastic building blocks. If the child wants to build a bigger house, he uses more LEGO blocks. If you need a bigger wastewater system, you need only more standard BioKube ...
-
PremiumManufactured by Atlantis International Corporation Pty Ltd.based in AUSTRALIA
The Atlantis Flo-Vault® is a structural lightweight modular tank system used to construct underground water storage for various applications. The modular nature of the system allows for the easy construction of tanks of any volume and can be designed to accommodate specific site conditions. Atlantis modular tank systems use surface and underground infiltration techniques, resulting in clean ...
-
PremiumManufactured by BioKube A/Sbased in DENMARK
BioKube’s Pluto systems are small STP plants designed for treating sewage water from single households. The Pluto systems are typically installed after a septic tank either in- or above ...
-
PremiumManufactured by BioKube A/Sbased in DENMARK
BioKube’s Mars 5000 system is a STP most commonly used for smaller residential housing groups or tourist accommodation sites. The Mars 5000 system is typically installed after a buffer tank and a septic tank either in- or above ...
-
PremiumManufactured by Sauereisen Inc.based in USA
FibreCrete TL 215 (TANK LININGS) is a two-component, fiber-reinforced, epoxy lining system that is used to protect concrete/steel tanks, ducts, scrubbers and other immersion environments from chemical attack and abrasion. FibreCrete TL 215 is specifically formulated for immersion service for tanks and scrubbers in the chemical, power, and municipal ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you